Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol 191-2801-126 is a 300V flat ribbon cable with 26 conductors of 28 AWG tinned copper. It has CSA and UL approvals, PVC insulation, and operates up to 105°C. Ideal for electrical wiring applications requiring flexibility and high conductivity.
Median Price
$3.158
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
VNN
A&K Electronics
Bristol Electronics
Lakeview Electronics
Atlantic Semiconductor
Continental Prestige Electronics
$3.095
Argo Parts USA
Gateway Technologies
$2.810
Advanced Electronics
$3.221
Singapore Electronics
$3.473
$3.229
$3.090
$2.952
Aztec Data Supply Inc.
$4.186
Corohmni
$7.076
AZTECH Wire
$11.620
$11.160
$10.940
$10.720
Ampacity Inc.
$13.500
Netroflash
$3.000
$2.937
Perfect Parts
Assy Fe
Cyclops Electronics Ltd (Excess)
Having CSA and UL approvals ensures that the product meets safety and quality standards set by respected organizations.
Using stranded construction makes the cable more flexible and resistant to fatigue, which is ideal for applications where the cable may be bent or moved frequently.
The high rated voltage allows for reliable performance in various electrical applications without compromising safety.
Polyvinyl chloride provides good insulation properties and resistance to heat, chemicals, and abrasion, enhancing the durability of the cable.
With a maximum operating temperature of 105°C, this cable can withstand high temperatures, making it suitable for demanding environments.
A smaller wire gauge (e.g., 28 AWG) allows for increased flexibility and easier handling, which can be beneficial in tight spaces or when routing the cable.
The specified length provides ample coverage for various installations, reducing the need for splicing or extending the cable.
A stranding of 7X36 enhances the flexibility and durability of the cable, making it suitable for applications where frequent bending or movement is required.
Tinned copper offers excellent conductivity and corrosion resistance, ensuring a reliable electrical connection over time.
The low resistance value (0.24 ohm) minimizes power loss and ensures efficient transmission of electrical signals through the cable.
With a rated current of 1 A, this cable can reliably carry electrical currents within the specified limit, making it suitable for low-power applications.
Having 26 conductors allows for multiple connections or signals to be transmitted through a single cable, reducing the need for additional wiring.
The flat ribbon cable design simplifies cable management and organization, making it easier to route and install in confined spaces or applications with limited clearance.
Electrical Wires & Cables 191-2801-126 attributes and parameters. Explore more Electrical Wires & Cables devices from Amphenol
Approvals (V):
Conductor Material:
Connector Accessory Type:
Construction:
DIN Conformity:
IEC Conformity:
Insulator Material:
Length:
MIL Conformity:
No. of Conductors:
Maximum Operating Temperature:
Rated Current:
Rated Voltage:
Resistance:
Shielding:
Stranding:
Wire Gauge (AWG):
Wire & Cable Name:
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
SS14
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
2N2222A
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SMBJ18CA
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
LM317BD2TG
Onsemi
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
MC33269T-3.3G
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
350766-1
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
1N4148WT
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
PXP6037/5M00
Bulgin
CABLE ASSEMBLY;
3365/15100
3m Electronic Products Division
WIRE AND CABLE;
33152430200002
Harting Electronics & Kg
2249-C-60
Pomona Electronics
Pomona Electronics 2249-C-60 is a solid construction shielded communication cable with BNC male connectors on both sides. It has a rated voltage of 500V, max operating temp of 50°C, and diameter of 4.95mm. Ideal for high-frequency signal transmission in various electrical applications.
82915
Delock
CABLE ASSEMBLY; Connector Side-1: USB 2.0 A MALE; Connector Side-2: USB 2.0 B MALE; Rated Current: .5 A; Shielding: YES; Wire Gauge (AWG): 22;
1174CSL005
Alpha Wire
1174CSL005 by Alpha Wire is a stranded electrical wire with a PVC jacket and tin finish. It has a rated voltage of 300V and is suitable for audio systems and communication circuits. With a wire gauge of 22 AWG, it has a diameter of 4.98mm and length of 30.48mm.
830030091000
Belden
Belden 830030091000 is a UL-approved flexible cord with stranded silver-coated copper conductor (24 AWG). Featuring TFE insulation, it has a diameter of 1.118 mm and stranding of 19X36. Ideal for electrical applications requiring flexibility and durability.
HDDVIMM5M
Startech.com
HDDVIMM5M by Startech.com is a 5m cable with HDMI 19P MALE and DVI-D MALE connectors. Featuring PVC jacket, shielding, and 30 AWG wire gauge, it has CE approval for electrical connections. Ideal for connecting devices like monitors or projectors with high-quality video and audio transmission.
FZTSPXNXNSNF020
Panduit
The Panduit FZTSPXNXNSNF020 is an ISO/IEC and TIA approved communication cable with LC cassette connectors on both sides. It has 12 conductors, a diameter of 10mm, and operates b/w -20°C to 70°C. Ideal for SAN applications due to its reliability and performance in various environments.
18642
Helukabel
WIRE AND CABLE; Rated Voltage: 450 V; Shielding: NO; Conductor Material: BARE COPPER; Jacket Material: POLYURETHANE; Additional Features: STANDARDS: DIN VDE 0285-525-2-21; DIN EN 50525-2-21;
CS-DSDMDB09MF-003
Amphenol
982661034
Molex
Molex 982661034 flat cable with UL approval, rated for 60V, features tin finish copper alloy conductor and polyester insulator. Suitable for applications requiring a temperature range of -40 to 105°C, it has 33 conductors with AWG 32 gauge and 0.03 mm2 cross section area, ideal for low current (0.5A) electrical connections.
13253
Helukabel 13253 is a stranded wire with polymer jacket, rated at 600V. With approvals from BS, CUL, DIN, IEC, UL, VDE, it's ideal for fixed installations. Featuring 5 bare copper conductors and a cross-section area of 1mm2, this flexible cord has an operating temperature range of -40 to 80°C.
M22759/11-24-9
Harbour Industries
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Approvals (V): MIL; MIL Conformity: YES; Maximum Operating Temperature: 200 Cel;
2147501032
1554211004
VHA00009-2M
L-com
115101-01-M0.25
21380
Helukabel 21380 is a control cable with CE and UL approvals, made of polyurethane jacket material. It has a rated voltage of 600V, suitable for offshore applications. With a temperature range from -40 to 80°C, it features bare copper conductor material and a cross-section area of 70mm2.
P568-010
Tripp Lite
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
191-2801-116
WIRE AND CABLE; Rated Voltage: 300 V; Rated Current: 1 A; Shielding: NO; Maximum Operating Temperature: 105 Cel; Approvals (V): CSA, UL;
191220101000
191-2801-160
WIRE AND CABLE; Rated Voltage: 300 V; Rated Current: 1 A; Shielding: NO; Wire & Cable Name: FLAT RIBBON CABLE; Insulator Material: POLYVINYL CHLORIDE;
191-2801-150
WIRE AND CABLE; Rated Voltage: 300 V; Rated Current: 1 A; Shielding: NO; Conductor Material: TINNED COPPER; IEC Conformity: NO;
191-2801-120
WIRE AND CABLE; Rated Voltage: 300 V; Rated Current: 1 A; Shielding: NO; Construction: STRANDED; Approvals (V): CSA, UL;
19124010250
191-2801-124
WIRE AND CABLE; Rated Voltage: 300 V; Rated Current: 1 A; Shielding: NO; Insulator Material: POLYVINYL CHLORIDE; Approvals (V): CSA, UL;
191-2815-044
WIRE AND CABLE; Rated Current: 1.3 A; Shielding: NO; Maximum Operating Temperature: 105 Cel; Stranding: 7X36; Resistance: .213 ohm;
191-2815-050
WIRE AND CABLE; Rated Current: 1.3 A; Shielding: NO; Resistance: .213 ohm; Insulator Material: POLYVINYL CHLORIDE; Wire & Cable Name: PLANAR CABLE;
191-2801-109
WIRE AND CABLE; Rated Voltage: 300 V; Rated Current: 1 A; Shielding: NO; Wire Gauge (AWG): 28; Conductor Material: TINNED COPPER;
191-2801-110
WIRE AND CABLE; Rated Voltage: 300 V; Rated Current: 1 A; Shielding: NO; IEC Conformity: NO; Length: 30.48 mm;
191-2801-114
191-2801-115
WIRE AND CABLE; Rated Voltage: 300 V; Rated Current: 1 A; Shielding: NO; Wire & Cable Name: FLAT RIBBON CABLE; Stranding: 7X36;
191-2801-125
WIRE AND CABLE; Rated Voltage: 300 V; Rated Current: 1 A; Shielding: NO; Insulator Material: POLYVINYL CHLORIDE; No. of Conductors: 25;
191-2801-130
191-2801-134
WIRE AND CABLE; Rated Voltage: 300 V; Rated Current: 1 A; Shielding: NO; Wire Gauge (AWG): 28; No. of Conductors: 34;
191-2801-136
191-2801-137
WIRE AND CABLE; Rated Voltage: 300 V; Rated Current: 1 A; Shielding: NO; Conductor Material: TINNED COPPER; Approvals (V): CSA, UL;
191-2801-140
Amphenol 191-2801-140 is a CSA/UL approved flat ribbon cable with 40 conductors, tinned copper construction, and PVC insulation. Featuring 7X36 stranding and rated for 300V/1A, it's ideal for electrical wiring applications requiring flexibility and durability at temperatures up to 105°C.
191-2801-164
WIRE AND CABLE; Rated Voltage: 300 V; Rated Current: 1 A; Shielding: NO; Stranding: 7X36; Conductor Material: TINNED COPPER;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved