Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Amphenol 172148 is an N-Type Connector with threaded coupling, gold/silver finish, and PTFE insulator. It has a VSWR of 1.3, operates up to 11 GHz at 50 ohm impedance. Ideal for RF applications requiring high-frequency transmission with low signal loss and secure connections.
Median Price
$7.270
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$3.570
100+ parts
-
1k+ parts
10k+ parts
Powell Electronics
$6.030
$5.550
TTI
Mouser Electronics
$6.820
$5.850
DigiKey
$8.450
$6.106
$5.191
Newark
$8.500
$8.050
RS Americas
$8.690
$6.690
$5.910
Element14
$9.255
$7.462
$5.625
Farnell
$9.598
$7.159
$5.396
Master Electronics
$5.960
$5.060
$5.050
Verical
$7.012
$6.753
TEDSS.com
$5.000
Bristol Electronics
$8.664
$4.332
VNN
Vyrian
IBS Electronics
$7.111
$5.933
$5.905
Electro Sonic
$6.240
$5.210
$5.160
Nova Conductors
Microwave Components, LLC
Sunrise Surplus Inc.
PC Components Company LLC
Corel Iberica Componentes, S.L.
Ampacity Inc.
$4.060
Semicontronic
$3.958
$3.938
Abianca Electronics
$4.510
$4.330
Gateway Technologies
$4.650
$4.138
Singapore Electronics
$5.115
$4.756
$4.552
$4.347
Aztec Data Supply Inc.
$9.944
Neutron USA
$44.990
Authorized Procurement Solutions
Argo Parts USA
Continental Prestige Electronics
Perfect Parts
Bastille Electronics
Assy Fe
The gold/silver finish provides high conductivity and corrosion resistance, ensuring reliable signal transmission.
Compliance with MIL standards ensures high quality and reliable performance in demanding military applications.
The threaded coupling provides secure mating and high vibration resistance, making it suitable for harsh environments.
Polytetrafluoroethylene offers excellent electrical insulation properties and high temperature resistance, ensuring stable performance.
RF N connectors are known for their high performance and durability, making them a preferred choice in RF applications.
Similar to termination contacts, gold/silver finish on mating contacts ensures reliable signal transmission and longevity.
A lower VSWR value indicates better signal transmission efficiency and minimal power loss in the connector.
Cable mounting allows for easy installation and integration into existing RF systems.
50 ohm impedance matching is standard in RF applications, ensuring optimal signal transfer and minimal signal loss.
Crimp termination provides a reliable and secure connection between the connector and the cable, reducing signal loss.
Female connectors are commonly used in RF systems and offer easy mating with male connectors for quick and secure connections.
The jack style allows for easy connection and disconnection of the connector, making it convenient for maintenance or replacement.
Straight mounting style is commonly used for direct cable connection, providing a streamlined and space-saving installation.
With a high operating frequency of 11 GHz, this connector is suitable for high-speed data transmission and broadband applications.
N-Type Connectors 172148 attributes and parameters. Explore more N-Type Connectors devices from Amphenol
Additional Features:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Manufacturer Series:
Mounting Style:
Mounting Type:
Maximum Operating Frequency:
Option:
Panel Mount:
Termination Type:
Voltage Standing Wave Ratio:
172148 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
NSN
5961-01-064-4873, 5961010644873, 5999-01-631-0890, 5999016310890
NIIN
010644873, 016310890
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
1N4148
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Shenzhen Yixinsemi Electronics
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Nexperia
MBRA340T3G
Onsemi
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
1N4148WT
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS123,215
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
172363
Amphenol
Amphenol 172363 is an N-Type RF connector with threaded coupling, female contact gender, and right-angle mounting style. Ideal for board mounting with solder termination, it's commonly used in RF applications requiring secure connections and high performance.
11_N-50-3-51/133_NE
Huber+suhner Ag
11_N-50-3-51/133_NE by Huber+suhner Ag is an RF N CONNECTOR with threaded coupling, suitable for 18 GHz applications. Featuring GOLD OVER NICKEL finish, BERYLLIUM COPPER contact material, and PPH insulator, it offers a characteristic impedance of 50 ohm. Ideal for cable mounting with solder termination in MIL and IEC conforming environments.
EZ-240-NMH-RA-X
Times Microwave Systems
EZ-240-NMH-RA-X by Times Microwave Systems is an RF N connector with 50 ohm impedance, gold termination finish, and 1.35 VSWR. Ideal for LMR240 cables, it operates from -55 to 125°C, withstands up to 1000VAC, and offers low insertion loss of -0.245 dB for applications requiring durability and high frequency performance up to 6 GHz.
R161322000W
Radiall S A
R161322000W by Radiall S A is an N-Type Connector with 0.17 dB Insertion Loss, gold termination finish. It has a threaded coupling type and 50 ohm impedance, suitable for RF applications up to 11 GHz. Ideal for panel and cable mounting in high-frequency communication systems.
172129RP
The Amphenol 172129RP is an N-Type Connector with 0.867" body depth, PTFE insulator, and brass shell. Ideal for RG-174/U cable termination in commercial applications requiring reliable RF connections. Features crimp termination, straight mounting, and locking option for secure installations.
R161.332.000
Radiall S A R161.332.000 N-Type Connector features 5000000000 ohm Insulation Resistance, 0.17 dB Insertion Loss, and 2500VAC Dielectric Withstanding Voltage. Ideal for RF applications with RG-11 cable types, operating from -55 to 155 °C at frequencies up to 11 GHz.
R161206000
Radiall S A's R161206000 N-Type Connector features 0.17 dB insertion loss, 1.18 VSWR, and 50 ohm impedance. With threaded coupling and gold over nickel finish, it is ideal for RF applications up to 11 GHz with MIL conformity.
R161010000
Radiall S A's R161010000 N-Type Connector features 0.17 dB insertion loss, 1.2 VSWR, and 50 ohm impedance. Ideal for RF applications up to 11 GHz, this threaded connector with gold termination is commonly used in cable assemblies for high-frequency signal transmission.
R161.256.000
R161.256.000 N-Type Connector by Radiall S A features a body diameter of 0.62", insulation resistance of 5G ohm, and insertion loss of 0.17 dB. Ideal for RF applications up to 11 GHz, this threaded connector with gold over nickel finish is panel mountable and offers durability for 500 cycles.
6039
Ddk
RF N CONNECTOR; Contact Gender: FEMALE; Coupling Type: THREADED; Body or Shell Style: RECEPTACLE; Mounting Style: STRAIGHT; MIL Conformity: YES;
3031-7341-10
M/a-com Technology Solutions
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: CRIMP SOLDER; Body or Shell Style: PLUG; Additional Features: APPLICABLE CABLES:RG 174/U; RG 179; RG 187; RG 188; RG 316; CAPTIVE CENTER CONTACT;
UG-594B/U
Kings Electronics
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Mounting Type: CABLE; Coupling Type: THREADED;
M39012/04-0001
Winchester Interconnect
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Insulator Material: POLYTETRAFLUOROETHYLENE; No. of Ports: 1;
082-4426
Amphenol 082-4426 is an N-Type Connector with 0.15 dB Insertion Loss, GOLD Termination, and THREADED Coupling. Ideal for RF applications up to 11 GHz, featuring POLYTETRAFLUOROETHYLENE insulator and 50 ohm impedance. Suitable for cable mounting with CRIMP termination and MALE contact gender.
R161220000
R161220000 by Radiall S A is an RF N CONNECTOR with 50 ohm impedance and 1.09 VSWR, suitable for applications up to 11 GHz. Featuring 0.17 dB insertion loss, GOLD OVER NICKEL termination, and MIL conformity, it is ideal for high-frequency cable connections requiring threaded coupling. The connector's PTFE insulator ensures reliable performance in demanding environments.
TC-600-NMH-X
Infinite Electronics International
TC-600-NMH-X by Infinite Electronics International is an N-Type Connector with 0.14 dB Insertion Loss, 1.3 VSWR, and 50 ohm Impedance. Ideal for RF applications up to 8 GHz, it features threaded coupling and PTFE insulator for MIL and IEC conformity.
R161020000
Radiall S A's R161020000 N-Type Connector features 0.17 dB Insertion Loss, 1.2 VSWR, and 11 GHz Max Operating Frequency. Ideal for RF applications requiring a 50 ohm characteristic impedance with gold-plated contacts for reliable signal transmission in high-frequency environments.
172133-11
Amphenol 172133-11 is an RF N connector with gold shell finish and PTFE insulator. It is a male plug connector for commercial applications, featuring brass shell material and solder termination. Ideal for panel mounting in straight configuration, offering reliable coaxial connection with locking option.
138-4408-007
Cinch Connectivity Solutions
RF N CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 1400VAC; Contact Style: COAX; No. of Ports: 1; Total No. of Contacts: 1;
R161.004.000
Radiall S A R161.004.000 N-Type Connector features 0.17 dB insertion loss, 1.2 VSWR, and 11 GHz max operating frequency. Ideal for RF applications requiring threaded coupling, gold over nickel termination, and 50 ohm impedance on cables.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
172165-11
RF N CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Termination Type: CRIMP; Panel Mount: YES; Voltage Standing Wave Ratio: 1.15;
172102H243
Amphenol 172102H243 N-Type Connector features threaded coupling, gold/silver finish, and PTFE insulator. With 50 ohm impedance and 1.3 VSWR, it operates up to 11 GHz. Ideal for RF applications requiring male crimp termination on cables.
172117
RF N CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 3500VAC; Insulator Material: POLYTETRAFLUOROETHYLENE;
172102H243-11
RF N CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Contact Style: COAX; Manufacturer Series: 172102H243-11; No. of Ports: 1;
172102H243RP
RF N CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mating Contact Finish: NOT SPECIFIED; Total No. of Contacts: 1; No. of Ports: 1;
172117-30
RF N CONNECTOR; Reliability: COMMERCIAL; Total No. of Contacts: 1; Mounting Style: STRAIGHT; Manufacturer Series: 172117-30; Insulator Material: POLYTETRAFLUOROETHYLENE;
172137
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Coupling Type: THREADED; Contact Material: NOT SPECIFIED; MIL Conformity: NO;
172129-10
RF N CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Body or Shell Style: JACK; Cable Types: RG-316/U; Mounting Option-1: LOCKING;
172129
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: JACK; MIL Conformity: YES; DIN Conformance: NO;
172133
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Characteristic Impedance: 50 ohm; Mounting Style: STRAIGHT; Maximum Operating Frequency: 11 GHz;
RF N CONNECTOR; Reliability: COMMERCIAL; Shell Material: BRASS; No. of Ports: 1; Insulator Material: POLYTETRAFLUOROETHYLENE; Termination Type: CRIMP;
172170-10
RF N CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Depth: .658 inch; Contact Material: NOT SPECIFIED; Mounting Style: STRAIGHT;
172106
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Contact Finish: GOLD; Panel Mount: YES; MIL Conformity: YES;
172149
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Panel Mount: YES; Termination Type: CRIMP;
172102
Amphenol 172102 is an N-Type Connector with threaded coupling, PTFE insulator, and brass shell. It has a VSWR of 1.3, impedance of 50 ohm, and operates up to 11 GHz. Ideal for commercial applications requiring reliable RF connections in cables like RG-393/U.
RF N CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Mounting Option-1: LOCKING; Shell Finish: GOLD; Insulator Material: POLYTETRAFLUOROETHYLENE;
172171
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: PLUG; Maximum Operating Frequency: 11 GHz; Voltage Standing Wave Ratio: 1.3;
172180
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Additional Features: APPLICABLE CABLES: RG 174/U, RG 188/U, RG 316/U; JESD-609 Code: e4;
172177
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Termination Contact Finish: GOLD; Insulator Material: POLYTETRAFLUOROETHYLENE;
172147
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Shell Finish: NEXCOTE; Total No. of Contacts: 1; Body or Shell Style: JACK;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved