Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CABLE ASSEMBLY;
Median Price
$25.965
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$14.410
100+ parts
-
1k+ parts
10k+ parts
NEP Electronics
$22.880
Master Electronics
$25.580
$19.200
$18.800
RS Americas
$26.350
$23.720
$22.660
Mouser Electronics
$26.360
$24.100
Element14
$27.583
$22.408
$22.260
Newark
$27.740
$25.030
DigiKey
$32.540
$23.509
$22.039
Encitech
$143.700
PEI Genesis
Chip1Stop
$19.700
Farnell
$23.410
Powell Electronics
$22.010
Verical
Bristol Electronics
$18.000
Nova Conductors
$18.646
Electro Sonic
$26.500
$17.660
$16.970
IBS Electronics
$35.876
$26.928
$26.367
VNN
Vyrian
Rapid Electronics
Aztec Data Supply Inc.
$2.510
Continental Prestige Electronics
$16.380
Ampacity Inc.
$16.740
Semicontronic
$16.322
$16.238
Corohmni
$17.740
Aranea Global
$18.273
$17.542
Gateway Technologies
$16.594
AZTECH Wire
$18.781
Singapore Electronics
$20.510
$19.074
$18.253
$17.433
Allen Electronics Distributors
$21.340
Argo Parts USA
Electrical Wires & Cables 145101-01-M1.00 attributes and parameters. Explore more Electrical Wires & Cables devices from Amphenol
Connector Accessory Type:
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
LM555CN
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
2N7002
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
2N2222A
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F407VGT6
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
Sensitron Semiconductor
International Devices
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
ST3485EBDR
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
5010/30CBK199
Alpha Wire
Alpha Wire 5010/30CBK199 is a 300V stranded wire with PVC jacket, suitable for flexible cord and fixture applications. Featuring 7x30 stranding, tin finish copper alloy conductor, and -35 to 105°C operating temperature range, it offers 0.326 mm2 cross section area and 0.054 ohm resistance.
44A0111-24-0
TE Connectivity
TE Connectivity's 44A0111-24-0 cable is a stranded wire with tin finish, rated at 600V. With a conductor material of copper alloy and max operating temperature of 150°C, it is ideal for general purpose and lightweight applications. Featuring a wire gauge of 24 AWG and diameter of 1.02mm, this flexible cord and fixture wire is suitable for various electrical needs.
1200661014
Molex
3051/1WH005
Alpha Wire 3051/1WH005 is a CSA/UL approved solid wire with TIN finish, rated for 300V. Ideal for flexible cord applications, it features PVC insulation, copper alloy conductor, and operates b/w -40 to 105°C.
M22759/11-20-9
Harbour Industries
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Diameter: 1.47 mm; Resistance: .03 ohm; Conductor Material: COPPER;
175101-10-M1.00
Amphenol
687980002
Molex 687980002 is a PVC jacketed cable assembly with shielding, rated for 30V and 3A. It features USB 2.0 C MALE connectors on both sides and has 22 conductors. This cable is commonly used in electrical applications requiring reliable data transfer.
801733
Helukabel
Helukabel 801733 is a PVC jacketed communication cable with CSA and UL approvals. It has 2 conductors, 7.5mm diameter, -30 to 85°C operating temp range. Ideal for fixed or limited flexible installations in dry or damp rooms.
1071313001
TE Connectivity 1071313001 is a flexible cord and fixture wire with a rated voltage of 1300V. It has a conductor finish of TIN and can operate in temperatures ranging from -55°C to 125°C. This wire, made of copper alloy, is commonly used in electrical applications requiring a max wire size of 20 AWG.
34160
WIRE AND CABLE; Rated Voltage: 225 V; Shielding: YES; Diameter: 13 mm; Maximum Operating Temperature: 70 Cel; Cross Section Area: .8 mm2;
151660427
Molex 151660427 flat cable with UL approval, rated for 60V and -40 to 105°C. Features tin-finished copper alloy conductor, polyester insulator, and 40 conductors in 0.01 mm2 cross section area. Ideal for electrical wiring applications requiring flexibility and durability.
M22759/34-22-9
TE Connectivity's M22759/34-22-9 is a 600V rated wire with TIN finish, ideal for applications requiring flexibility. With a temperature range of -65 to 150°C, this copper alloy conductor wire in 22 AWG size is suitable for MIL-DTL-22759 cables and fixtures.
M22759/32-18-9
Defense Logistics Agency
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Additional Features: STANDARD: MIL-W-22759; Conductor Finish: TIN; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE;
PXP6040/A/3M00
Bulgin
The Bulgin PXP6040/A/3M00 is a UL-approved communication cable with PVC jacket, 4 conductors, and USB A male to USB B male connectors. It has a rated voltage of 30V, current of 1A, and operates b/w 0-70°C. Ideal for data transfer applications requiring a compact 0.08mm2 cross-section area.
34123
WIRE AND CABLE;
CAU3AA-05M
L-com
CABLE ASSEMBLY; Connector Side-1: USB A 3.0 MALE; Connector Side-2: USB A 3.0 MALE; Shielding: YES; Jacket Material: POLYVINYLCHLORIDE; Approvals (V): UL;
55A0111-22-90
TE Connectivity's 55A0111-22-90 cable is a stranded wire with tin finish, rated at 600V. With a conductor made of copper alloy and 22 AWG gauge, it operates b/w -65 to 150°C. Ideal for general purpose and lightweight applications, this flexible cord has a diameter of 1.09mm and cross-section area of 0.38 mm2.
18642
WIRE AND CABLE; Rated Voltage: 450 V; Shielding: NO; Conductor Material: BARE COPPER; Jacket Material: POLYURETHANE; Additional Features: STANDARDS: DIN VDE 0285-525-2-21; DIN EN 50525-2-21;
3365/14
3m Electronic Products Division
3365/14 by 3m Electronic Products Division is a UL approved stranded electrical wire with a rated voltage of 300V. It features tinned copper conductors, polyvinyl chloride insulation, and can operate in temperatures ranging from -20 to 105 °C. This flat flexible cable with 14 conductors is suitable for various wire and cable applications.
282784-000
TE Connectivity's 282784-000 wire is a flexible cord with 24 AWG copper alloy conductor, rated for 600V and -65 to 150°C. Ideal for electrical applications requiring durable cables with TIN finish, such as fixtures and power cords.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
145101-01-M0.25
145104-01-M0.75
145101-01-M0.75
145101-01-M0.50
145104-01-M0.25
145101-05-06.00
CABLE ASSEMBLY; Connector Side-1: SMB PLUG; Connector Side-2: SMB PLUG; Shielding: YES; Wire & Cable Name: COMMUNICATION CABLE; Construction: SOLID;
145101-05-12.00
CABLE ASSEMBLY; Connector Side-1: SMB PLUG; Connector Side-2: SMB PLUG; Shielding: YES; Wire & Cable Name: COMMUNICATION CABLE; No. of Conductors: 1;
145104-05-06.00
145104-05-12.00
145101-01-18.00
145101-01-48.00
145104-01-18.00
145101-18-12.00
145101-18-18.00
145101-18-24.00
145101-18-30.00
145101-18-36.00
145103-18-12.00
145103-18-18.00
145101-18-06.00
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved