Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF SMB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Shell Finish: GOLD; Total No. of Contacts: 1; Termination Type: CRIMP;
Median Price
$6.820
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
< 1k
DigiKey
1+ parts
$6.540
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$7.100
$5.550
$4.530
Q Components
Gateway Technologies
$4.520
$4.022
Singapore Electronics
$4.971
$4.623
$4.424
$4.225
Perfect Parts
SSMB Connectors 142331 attributes and parameters. Explore more SSMB Connectors devices from Amphenol
Body or Shell Style:
Cable Types:
Connector Type:
Contact Gender:
Contact Style:
Insulator Color:
Insulator Material:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Panel Mount:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
142331 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
NSN
4720-14-375-2398, 4720143752398, 5315-00-713-5203, 5315007135203, 8030-99-224-9149, 8030992249149
NIIN
143752398, 007135203, 992249149
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
BSS138
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Yangzhou Yangjie Electronics
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
C0603C104K5RACTU
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
1N4148
Toshiba
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
Yageo
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
1N4148WS
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
142212
Amphenol
Amphenol 142212 is an RF SMB connector with gold finish, suitable for 50 ohm impedance. It features a snap coupling type and polytetrafluoroethylene insulator material. Ideal for cable mounting applications requiring a female contact gender in a straight plug configuration.
1-2345658-3
TE Connectivity
TE Connectivity's 1-2345658-3 SSMB Connector features PBT-POLYESTER insulator, with dimensions of 1.079" x 0.679" x 0.675". Operating b/w -40 to 125°C, it has a polarized SMB connector type for cable mounting applications.
R125.680.000W
Radiall S A
R125.680.000W by Radiall S A is a RF SMA CONNECTOR with 1 port and 50 ohm characteristic impedance. It has a body length of 0.248 inch, insulation resistance of 5GΩ, and insertion loss of 0.07 dB. This connector is commonly used in commercial applications requiring durability, such as in board mounting for frequencies up to 18 GHz.
131-3701-811
Cinch Connectivity Solutions
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Frequency: 4 GHz; Mounting Style: STRAIGHT; Insulator Material: PERFLUOROALKOXY/POLYTETRAFLUOROETHYLENE;
1-1337604-0
TE Connectivity 1-1337604-0 is a RF SMB Connector with 50 ohm impedance, suitable for applications up to 4 GHz. Featuring POLYTETRAFLUOROETHYLENE insulator and GOLD finish, it has a temperature range of -65 to 165 °C. Ideal for board mounting, this FEMALE connector has a STRAIGHT JACK body style.
Bel Fuse
Bel Fuse's 131-3701-811 RF SMB Connector features a dielectric voltage of 1400VAC, 50 ohm impedance, and male contact gender. With durability of 500 cycles, it is ideal for commercial applications requiring a max frequency of 4 GHz in temperatures ranging from -65 to 165°C.
131-3303-501
Bel Fuse 131-3303-501 is a RF SMB connector with 50 ohm impedance, 0.6 dB insertion loss, and 1400VAC dielectric voltage. Ideal for commercial applications requiring durable connectors with 4 GHz frequency support. Features include POLYTETRAFLUOROETHYLENE insulator, BRASS shell material, and -65 to 165 °C operating temperature range.
73100-0256
Molex
Molex 73100-0256 SSMB Connector features gold/nickel termination, PTFE insulator, and beryllium copper contact. Ideal for RF applications up to 4 GHz with 1.1 VSWR, this right-angle plug connector has a characteristic impedance of 75 ohm and male gender for cable mounting via crimp termination.
131-3701-261
Bel Fuse 131-3701-261 is a RF SMB connector with 50 ohm impedance, POLYTETRAFLUOROETHYLENE insulator, and 1400VAC dielectric voltage. Ideal for commercial applications requiring durable connectors with -65 to 165 °C operating range and 4 GHz frequency support.
413985-3
TE Connectivity 413985-3 is a RF SMB Connector with 0.3 dB Insertion Loss, SNAP Coupling Type, and PTFE Insulator. It operates b/w -65 to 165 °C, suitable for RG 188/316/174 cables in applications up to 4 GHz frequency. The connector features a nickel finish brass shell, crimp termination, and female contact gender.
1-2291392-3
TE Connectivity 1-2291392-3 is an EMI shielded RF SMB connector with dielectric voltage of 800VAC. It has a characteristic impedance of 50 ohm, operates up to 6 GHz, and is suitable for board mounting applications. The connector features a zinc alloy shell, right angle mounting style, and solder termination type.
Ef Johnson
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Insertion Loss: .3 dB; Body or Shell Style: RECEPTACLE;
413985-1
TE Connectivity's 413985-1 SSMB Connector features 0.3 dB Insertion Loss, SNAP Coupling Type, and POLYTETRAFLUOROETHYLENE Insulator. Ideal for RF applications up to 4 GHz with 50 ohm impedance, it supports RG 316, RG 188, and RG 174 cables in temperatures ranging from -65 to 165 °C.
414002-1
Tyco Electronics Amp
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; Mounting Style: RIGHT ANGLE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
1-2345654-0
TE Connectivity 1-2345654-0 is a SSMB Connector with dimensions of 1.079" x 0.386" x 0.655". It has PBT-POLYESTER insulator, operates b/w -40 to 125°C, and features SMB connector type for cable mounting. Suitable for applications requiring polarized female connectors with crimp termination.
414002-2
TE Connectivity's 414002-2 SSMB Connector features 0.25" body diameter, 0.3 dB insertion loss, and 50 ohm impedance. Ideal for RF applications with RG 188, RG 174, or RG 316 cables. With a max operating frequency of 4 GHz and durability of 500 cycles, it offers reliable performance in commercial settings.
R114.665.000
Radiall S A R114.665.000 is a RF SMB Connector with 50 ohm impedance, gold-plated contacts, and PTFE insulator for high durability. Ideal for applications requiring panel mounting, withstanding voltage up to 1400VAC, and operating temperatures from -65 to 165°C.
142186-75
Amphenol 142186-75 is a RF SMB connector with 75 ohm impedance, gold shell finish, and PTFE insulator. It is used for RG-179/U cable termination in commercial applications requiring reliable coax connections.
R114205000
The Radiall S A R114205000 RF SMB Connector has low insertion loss of 0.05 dB and high VSWR of 1.35, suitable for up to 4 GHz frequency applications. With gold termination finish and MIL/IEC conformity, it is ideal for 50 ohm cable connections requiring snap coupling in RF systems.
R114186000
Radiall S A's R114186000 SSMB Connector features gold termination with nickel barrier, 50 ohm impedance, and 4 GHz operating frequency. Ideal for RF applications, this crimp-type connector is IEC and MIL compliant, suitable for cable mounting in right-angle configuration.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved