Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Mounting Type: CABLE; Termination Type: CRIMP;
Median Price
$5.410
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
DigiKey
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Electro Sonic
$201.440
Gateway Technologies
$5.000
$4.450
Singapore Electronics
$5.500
$5.115
$4.895
$4.674
SSMB Connectors 142185 attributes and parameters. Explore more SSMB Connectors devices from Amphenol
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mounting Style:
Mounting Type:
Option:
Panel Mount:
Termination Type:
142185 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
NSN
5330-99-203-7714, 5330992037714, 5935-01-453-1659, 5935014531659, 5962-01-474-6560, 5962014746560, 5963-01-018-8366, 5963010188366
NIIN
992037714, 014531659, 014746560, 010188366
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
1N4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148WS
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
BAV99
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138PS,115
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Fairchild Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRS3200T3G
Onsemi
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
SMMBT3904LT1G
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
Baneasa S A
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
LL4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Littelfuse
DRV5053VAQLPG
Texas Instruments
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
413990-1
TE Connectivity 413990-1 is a SSMB Connector with 0.25" body length, 1000000000 ohm insulation resistance, and 0.3 dB insertion loss. Ideal for RF applications up to 4 GHz, it features POLYTETRAFLUOROETHYLENE insulator material and BRASS shell material for durability.
1-2345658-1
TE Connectivity 1-2345658-1 is a SSMB Connector with dimensions of 1.079" x 0.679" x 0.675". It has PBT-POLYESTER insulator, operates b/w -40 to 125°C, and features a polarized SMB connector type. Ideal for cable mounting applications with crimp termination, it has one connector with two female contacts.
142252
Amphenol
Amphenol 142252 is an RF SMB connector with gold finish, snap coupling, and PTFE insulator. Ideal for cable mounting with crimp solder termination, male contact gender, and right angle mounting style. Perfect for applications requiring reliable RF connections in compact spaces.
131-3701-261
Johnson Components
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: SOLDER; MIL Conformity: NO; Manufacturer Series: SMB;
5414363-3
TE Connectivity 5414363-3 is a SSMB Connector with 0.25" body diameter, 0.54" depth, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, it features PTFE insulator, nickel finish, and crimp termination for durability in cable mounting setups.
73100-0259
Molex
Molex 73100-0259 is an RF SMB connector with SNAP coupling, PTFE insulator, and 75 ohm impedance. Ideal for board mounting in applications up to 4 GHz frequency range. Male contact gender with right angle mounting style and solder termination.
131-3693-116
Vertiv
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Insulator Material: PERFLUOROALKOXY/POLYTETRAFLUORO ETHYLENE;
1-1337482-0
TE Connectivity 1-1337482-0 is a RF SMB CONNECTOR with characteristic impedance of 50 ohm. It has PTFE insulator, gold shell finish, and operates b/w -65 to 165 °C. Ideal for applications requiring high frequency up to 4 GHz, such as in board mounting configurations.
R114005000
Radiall S A
The Radiall S A R114005000 SSMB Connector features low insertion loss of 0.05 dB and gold termination contact finish. With MIL and IEC conformity, it has a snap coupling type for RF SMB applications up to 4 GHz frequency range. Ideal for cable mounting with 50 ohm impedance, this female plug connector offers reliable performance in various RF systems.
R114.205.000
R114.205.000 by Radiall S A is an RF SMB CONNECTOR with 0.5 dB Insertion Loss, GOLD Termination Contact Finish, and SNAP Coupling Type. Made of POLYTETRAFLUOROETHYLENE, it has a 50 ohm Characteristic Impedance and operates up to 4 GHz. Ideal for applications requiring high-frequency signal transmission in telecommunications and aerospace industries.
903-512J-71P
Amphenol 903-512J-71P is a RF SMB connector with 0.3 dB insertion loss, gold termination finish, and snap coupling. Ideal for board mounting in applications requiring 75 ohm impedance up to 4 GHz frequency. Features male contact gender, PTFE insulator material, and zinc alloy shell for reliable commercial use.
FA1-NDRP-PCB-8
The Amphenol FA1-NDRP-PCB-8 is a RF SMB connector with 50 ohm impedance, suitable for applications up to 6 GHz. Featuring a dielectric voltage of 1131VAC, it has a durable zinc alloy shell and operates b/w -65°C to 125°C. Ideal for board mounting in high-frequency electronic systems.
R125.680.000W
R125.680.000W by Radiall S A is a RF SMA CONNECTOR with 1 port and 50 ohm characteristic impedance. It has a body length of 0.248 inch, insulation resistance of 5GΩ, and insertion loss of 0.07 dB. This connector is commonly used in commercial applications requiring durability, such as in board mounting for frequencies up to 18 GHz.
R114.186.000
The Radiall S A R114.186.000 SSMB Connector features 1 dB insertion loss, 1000VAC dielectric voltage, and 50 ohm impedance for RF applications up to 4 GHz. With a gold over nickel finish and PTFE insulator, it is ideal for commercial use in cables with RG-179 type connectors requiring male contact gender and crimp termination. Operating temperatures range from -65 to 165°C with durability of 500 cycles.
73403-5112
RF SMB/SSMB Connectors; Contact Material: NOT APPLICABLE; Mating Contact Finish: NOT APPLICABLE;
131-3303-501
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: APPLICABLE CABLES: RG 161/U; RG 174, CAPTIVE CONTACT, INSERTION LOSS MAX AT 1.5 GHZ; Insulator Material: POLYTETRAFLUOROETHYLENE; Characteristic Impedance: 50 ohm;
1060464-1
TE Connectivity's 1060464-1 SSMB Connector features a body size of 0.25" x 0.25" x 0.525", PTFE insulation, and gold shell finish. Ideal for RF applications with a characteristic impedance of 50 ohm, operating up to 4 GHz. Suitable for commercial use with durability of 500 cycles in board mounting configurations.
R114082000
Radiall S A's R114082000 SSMB Connector features 1000000000 ohm Insulation Resistance, 0.5 dB Insertion Loss, and 1400VAC Dielectric Withstanding Voltage. Ideal for RF applications up to 4 GHz, this gold-plated connector is suitable for cables like RG174/RG316/RG179 with a characteristic impedance of 50 ohm.
Cinch Connectivity Solutions
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: PERFLUOROALKOXY/POLYTETRAFLUOROETHYLENE; JESD-609 Code: e4; Mounting Type: BOARD;
R114426000W
R114426000W by Radiall S A is a RF SMB CONNECTOR with 50 ohm impedance, gold-plated contacts, and MIL/IEC conformity. Ideal for board mounting applications up to 4 GHz frequency range, featuring SNAP coupling for easy installation.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved