Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Shell Material: BRASS; Total No. of Contacts: 1;
Median Price
$12.410
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
< 1k
Arrow
1+ parts
$1.022
100+ parts
$1.009
1k+ parts
-
10k+ parts
RS Americas
$6.100
RS (Exports)
DigiKey
$18.990
$13.717
$12.246
Mouser Electronics
$20.500
$15.030
$13.660
Verical
$17.800
Master Electronics
$12.840
$11.880
Powell Electronics
$11.350
$9.710
Farnell
IBS Electronics
$17.882
Gateway Technologies
$2.000
$1.780
Singapore Electronics
$2.200
$2.046
$1.958
$1.870
SSMA Connectors 132444 attributes and parameters. Explore more SSMA Connectors devices from Amphenol
Body Depth:
Body or Shell Style:
Cable Types:
Characteristic Impedance:
Connector Type:
Contact Gender:
Contact Style:
Dielectric Withstanding Voltage (V):
Durability:
Insulator Color:
Insulator Material:
Manufacturer Series:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
132444 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
NSN
5995-14-408-0042, 5995144080042, 6640-00-526-7364, 6640005267364
NIIN
144080042, 005267364
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
SS14
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
1N4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Pulse Electronics
2N7002
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
LL4148-GS08
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
National Semiconductor
MBRS360T3G
Onsemi
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
1N4148WT
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Renesas Electronics
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
INA826AIDGKR
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
73391-0083
Molex
The Molex 73391-0083 is a SSMA connector with a body length of 0.25 inch, insulation resistance of 5G ohm, and insertion loss of 0.05 dB. It is commonly used in RF SMA connectors for applications requiring a characteristic impedance of 50 ohm and max operating frequency of 18 GHz.
9408-1113-000
Radiall S A
Radiall S A's 9408-1113-000 SSMA Connector features gold termination with nickel barrier, threaded coupling, and PTFE insulator. With a 50 ohm impedance and 18 GHz operating frequency, it is ideal for RF applications requiring high reliability in commercial settings.
SMA-J-P-H-ST-TH1
Samtec
SMA-J-P-H-ST-TH1 by Samtec is a RF SMA connector with gold termination, suitable for commercial applications. With a max operating frequency of 18 GHz, it offers reliable performance. This straight-mount connector has a body size of 0.276" x 0.276" x 0.376", making it ideal for board mounting in high-frequency systems.
R125236000
R125236000 by Radiall S A is an RF SMA connector with a threaded coupling type and gold termination contact finish. Featuring a low insertion loss of 0.21 dB, it operates at up to 12.4 GHz frequency, making it ideal for high-frequency applications requiring a characteristic impedance of 50 ohms. The connector's hermetic option and female contact gender offer versatility in various cable mounting configurations.
142-0701-501
Bel Fuse
The Bel Fuse 142-0701-501 SSMA Connector features a dielectric voltage of 1400VAC, insulation resistance of 5000000000 ohm, and operates b/w -65 to 165 °C. Ideal for RF applications with a characteristic impedance of 50 ohm, this connector offers durability up to 500 cycles and supports frequencies up to 18 GHz.
142-4701-501
Johnson Components
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Coupling Type: THREADED; Mounting Style: RIGHT ANGLE;
142-9701-301
Vertiv
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Coupling Type: THREADED; JESD-609 Code: e4; Panel Mount: NO;
1052098-1
TE Connectivity
1052098-1 by TE Connectivity is an SSMA Connector with 0.665" body length, 10000000000 ohm insulation resistance, and 0.25 dB insertion loss. Ideal for RF applications up to 12.4 GHz, it features a threaded coupling type and PTFE insulator material.
5350-3
Carlisle Interconnect Technologies
The Carlisle Interconnect Technologies 5350-3 is an RF SMA CONNECTOR with MALE contact gender and COAX style. It features a 0.05" terminal length, STRAIGHT mounting style, and LOCKING option. Ideal for commercial applications requiring reliable SSMA connectors.
5934-1
The Carlisle Interconnect Technologies 5934-1 is an RF SMA connector with a 0.445 inch body depth and gold shell finish. It features a polarized housing and is made of stainless steel, making it suitable for commercial applications requiring reliable coaxial connections.
1056462-1
TE Connectivity's 1056462-1 SSMA Connector features 0.665" body length, 5000000000 ohm insulation resistance, and 0.17 dB insertion loss. Ideal for RF applications up to 6 GHz with RG-174/U cable termination in commercial settings.
4850
Pomona Electronics
The Pomona Electronics 4850 is an RF SMA connector with a threaded coupling type, gold contact finish, and polytetrafluoroethylene insulator. It has a max operating frequency of 18 GHz and is ideal for commercial applications requiring a 50 ohm characteristic impedance. The panel-mountable connector features female contact gender and solder termination for reliable performance in temperatures ranging from -65 to 165°C.
1052030-1
TE Connectivity's 1052030-1 is an RF SMA connector with threaded coupling, TFE insulator, and gold shell finish. With 50 ohm impedance, it operates from -65 to 165°C and handles RG 196 cables. Ideal for commercial applications up to 12.4 GHz requiring high insulation resistance and low insertion loss.
142-0711-201
Bel Fuse 142-0711-201 is a RF SMA connector with 50 ohm impedance, suitable for commercial applications up to 18 GHz. Featuring POLYTETRAFLUOROETHYLENE insulator, it offers high durability with 500 cycles and low contact resistance of 4 mohm. With a compact size of 0.25" x 0.25" x 0.348", it is ideal for board mounting in various electronic systems.
21_SMA-50-2-15/111_NE
Huber+suhner Ag
21_SMA-50-2-15/111_NE by Huber+suhner Ag is an RF SMA connector with gold/nickel finish, suitable for commercial applications up to 18 GHz. Featuring a threaded coupling type and beryllium copper shell material, it offers a characteristic impedance of 50 ohm. With durability of 500 cycles, this jack-style connector operates b/w -65°C to 165°C.
901-9850
Amphenol
Amphenol 901-9850 is an RF SMA connector with 0.13 dB insertion loss, 1.25 VSWR, and 50 ohm impedance. Ideal for commercial applications up to 18 GHz, it features gold over nickel termination and PTFE insulator for reliable surface mount connections on boards.
142-0771-831
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Voltage Standing Wave Ratio: 1.5; Additional Features: VSWR: 1.41 AT 18 GHZ; Characteristic Impedance: 50 ohm;
1052901-1
TE Connectivity's 1052901-1 SSMA Connector features 0.13 dB insertion loss, 50 ohm impedance, and 18 GHz operating frequency. Ideal for RF applications, this panel-mount connector with TFE insulator and gold finish is designed for high-performance in a wide temperature range from -65 to 105°C.
5348
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Total No. of Contacts: 1; Polarization Key: POLARIZED HOUSING; Contact Style: COAX;
132360
Amphenol 132360 is an RF SMA connector with gold finish, suitable for applications up to 18 GHz. Featuring a characteristic impedance of 50 ohm and gold-plated brass shell, it offers durability of 500 cycles. With a threaded coupling type and PTFE insulator material, it operates b/w -65°C to 165°C effectively.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved