Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF SMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Shell Finish: GOLD; No. of Ports: 1;
Median Price
$13.540
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$13.100
100+ parts
$9.470
1k+ parts
$8.450
10k+ parts
-
Powell Electronics
DigiKey
$13.720
$9.911
$8.426
Digiode
$11.191
Vyrian
$11.780
Gateway Technologies
$9.000
$8.009
Singapore Electronics
$9.900
$9.207
$8.810
$8.415
Corphita
$10.602
Perfect Parts
SSMA Connectors 132345 attributes and parameters. Explore more SSMA Connectors devices from Amphenol
Body Depth:
Body or Shell Style:
Cable Types:
Connector Type:
Contact Gender:
Contact Style:
Insulator Color:
Insulator Material:
Manufacturer Series:
Mounting Option-1:
Mounting Style:
No. of Ports:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Total No. of Contacts:
132345 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
NSN
2915-00-632-8967, 2915006328967, 4520-00-060-9447, 4520000609447, 5315-01-222-7284, 5315012227284
NIIN
006328967, 000609447, 012227284
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
2N2222A
Philips Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ULN2803A
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
LL4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MURS160T3G
Onsemi
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
1N4148
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
Continental Device India
RC0805FR-0710KL
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
STM32F103C8T6
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
Infineon Technologies
Crimson Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
73391-0080
Molex
The Molex 73391-0080 is a SSMA connector with a body length of 0.25 inch, insulation resistance of 5G ohm, and insertion loss of 0.05 dB. It is commonly used in RF SMA connectors for applications requiring a characteristic impedance of 50 ohm and max operating frequency of 18 GHz.
73251-0410
Molex 73251-0410 is an RF SMA connector with threaded coupling, gold nickel termination, and 0.312 dB insertion loss. It has a max operating frequency of 27 GHz and is ideal for commercial applications requiring a 50 ohm characteristic impedance. This female receptacle connector can be panel mounted and offers reliable performance with a VSWR of 1.42.
142-0701-231
Cinch Connectivity Solutions
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: PERFLUOROALKOXY/POLYTETRAFLUORO ETHYLENE; IEC Conformity: NO; Filter Feature: NO;
SF1211-6062
Sv Microwave
SF1211-6062 by Sv Microwave is a SSMA Connector with 50 ohm impedance, 0.12 dB insertion loss, and 1.25 VSWR. Ideal for RF SMP applications up to 26.5 GHz, it features PTFE insulation, steel shell material, and can withstand temperatures from -65 to 165 °C.
132114
Amphenol
Amphenol 132114 SSMA Connector features 0.14 dB Insertion Loss, GOLD Termination Contact Finish, and THREADED Coupling Type. Ideal for RF applications up to 12.4 GHz with POLYTETRAFLUOROETHYLENE insulator material, 50 ohm impedance, and CRIMP termination on CABLE mounting.
142-0403-011
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: PERFLUOROALKOXY/POLYTETRAFLUORO ETHYLENE; Termination Type: CRIMP/SOLDER; Voltage Standing Wave Ratio: 1.4;
R125176000
Radiall S A
The Radiall S A R125176000 SSMA Connector features 0.25 dB insertion loss, GOLD termination contact finish, and threaded coupling type. Ideal for RF applications up to 12.4 GHz, with a characteristic impedance of 50 ohm. Suitable for cable mounting with right angle plug style.
R125172000
The Radiall S A R125172000 SSMA Connector features 0.53 dB insertion loss, gold (Au) termination with nickel (Ni) barrier, and threaded coupling. With a max operating frequency of 12.4 GHz, it is ideal for RF applications requiring a 50 ohm characteristic impedance and male plug connector in right-angle mounting style.
142-0701-491
Bel Fuse's 142-0701-491 SSMA Connector features 5000000000 ohm Insulation Resistance, 1400VAC Dielectric Withstanding Voltage, and -65 to 165 °C Operating Temperature. Ideal for RF applications up to 18 GHz with a durability of 500 Cycles.
SMA-J-P-H-ST-EM1
Samtec
SMA-J-P-H-ST-EM1 by Samtec is a RF SMA connector with gold finish, threaded coupling, and 18 GHz operating frequency. Ideal for commercial applications requiring reliable surface mount female connectors on boards.
25_SMA-50-3-15/111_NE
Huber+suhner Ag
25_SMA-50-3-15/111_NE by Huber+suhner Ag is a threaded RF SMA connector with gold finish, suitable for panel mounting. It has a characteristic impedance of 50 ohm, can operate b/w -65 to 165 °C, and withstands up to 18 GHz frequency. Ideal for applications requiring durable female jack connectors with solder termination.
142-0701-411
Vertiv
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Maximum Operating Frequency: 18 GHz;
142-0711-821
Johnson Components
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Mounting Style: STRAIGHT; Coupling Type: THREADED;
16_SMA-50-3-3/111_NE
16_SMA-50-3-3/111_NE by Huber+suhner Ag is a threaded RF SMA connector with gold/nickel contacts, suitable for cables like EZ_141_TP_M17. It has a max operating frequency of 18 GHz, impedance of 50 ohm, and durability of 500 cycles. Ideal for commercial applications requiring reliable MIL/IEC conformity in temperature range -65 to 165°C.
R125.680.000
Radiall S A's R125.680.000 SSMA Connector features 5000000000 ohm Insulation Resistance, 0.3 dB Insertion Loss, and 1414VAC Dielectric Withstanding Voltage. Ideal for RF applications up to 18 GHz, this gold-finished connector has a characteristic impedance of 50 ohm and operates b/w -65°C to 165°C.
R125464271
The Radiall S A R125464271 is an RF SMA connector with a threaded coupling type and 50 ohm impedance. It features a low insertion loss of 0.296 dB and high VSWR of 1.16, suitable for applications up to 18 GHz. This panel mount receptacle with PTFE insulator is ideal for high-frequency communication systems.
5-1814400-1
TE Connectivity
TE Connectivity 5-1814400-1 is an RF SMA connector with threaded coupling, suitable for board mounting. With a characteristic impedance of 50 ohm and max operating frequency of 3 GHz, it features a zinc alloy shell and polytetrafluoroethylene insulator material. Ideal for applications requiring high-frequency signal transmission in electronic devices.
CON-SMA-EDGE-S
Rf Solutions
CON-SMA-EDGE-S by Rf Solutions is a threaded RF SMA connector with a body length, width, and depth of 0.25", 0.25", and 0.375" respectively. It has a characteristic impedance of 50 ohm and can operate at frequencies up to 18 GHz. This surface mount connector is commonly used in board-mounted applications requiring high-frequency connections.
901-10385
Amphenol 901-10385 is a SSMA connector with gold shell finish, PTFE insulator, and 50 ohm impedance. Ideal for RF applications up to 3 GHz, it features a female jack contact in a right-angle mounting style suitable for board and panel installations. Operating from -65°C to 165°C, this connector offers low VSWR of 1.3 for reliable commercial use.
2062-0000-00
Tyco Electronics M/a-com
2062-0000-00 by Tyco Electronics M/a-com is an RF SMA connector with threaded coupling, gold finish, and 50 ohm impedance. It is ideal for board mounting applications up to 18 GHz frequency range. The female jack connector features a PTFE insulator and solder termination for reliable performance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved