Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; IEC Conformity: NO; Characteristic Impedance: 50 ohm;
Median Price
$46.630
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
Mouser Electronics
1+ parts
100+ parts
$36.280
1k+ parts
-
10k+ parts
Gateway Technologies
$8.000
$7.120
Singapore Electronics
$8.800
$8.184
$7.832
$7.480
N-Type Connectors 082-5995 attributes and parameters. Explore more N-Type Connectors devices from Amphenol
Additional Features:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insertion Loss:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mounting Style:
Mounting Type:
Maximum Operating Frequency:
Option:
Panel Mount:
Termination Type:
Voltage Standing Wave Ratio:
082-5995 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
ULN2803A
Texas Instruments
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
SMBJ18CA
Lite-on Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
BAV99
Comchip Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
Shanghai Lunsure Electronic Technology
Rfe International
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
Onsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Pro-an Electronic
SPC TECHNOLOGY/ MULTICOMP
172100
Amphenol
The Amphenol 172100 N-Type Connector features a Dielectric Withstanding Voltage of 3500VAC, Coupling Type THREADED, and Insulator Material POLYTETRAFLUOROETHYLENE. Ideal for RF applications with a max operating frequency of 11 GHz, this connector offers durability with 500 cycles and operates in temperatures ranging from -65 to 165 °C.
R161220000
Radiall S A
R161220000 by Radiall S A is an RF N CONNECTOR with 50 ohm impedance and 1.09 VSWR, suitable for applications up to 11 GHz. Featuring 0.17 dB insertion loss, GOLD OVER NICKEL termination, and MIL conformity, it is ideal for high-frequency cable connections requiring threaded coupling. The connector's PTFE insulator ensures reliable performance in demanding environments.
R161332000
R161332000 by Radiall S A is an N-Type Connector with 0.17 dB Insertion Loss, 1.2 VSWR, and 50 ohm Impedance. Ideal for applications up to 11 GHz, it features a gold-plated termination for reliable RF connections in various systems requiring threaded coupling and panel mounting.
R161022000W
R161022000W N-Type Connector by Radiall S A features 0.16 dB insertion loss, 1.2 VSWR, and 11 GHz max operating frequency. Ideal for RF applications requiring threaded coupling, this connector has a 50 ohm impedance and PTFE insulator for reliable performance in cable installations.
082-5373
Amphenol 082-5373 is an N-Type Connector with 0.15 dB Insertion Loss, 1.3 VSWR, and 50 ohm Impedance. Ideal for RF applications up to 11 GHz, it features a gold termination finish and threaded coupling for secure connections on panels or cables.
R161.082.120
Radiall S A's R161.082.120 N-Type Connector has an Insulation Resistance of 5G ohm, operates b/w -55 to 155°C, and offers a durability of 500 cycles. Ideal for RF applications up to 11 GHz, it features a POLYTETRAFLUOROETHYLENE insulator and BRASS shell material for reliable commercial use with LMR195 cables.
172219
Amphenol 172219 is an N-Type Connector with MIL Conformity, threaded coupling, and PTFE insulator. Ideal for RF applications up to 11 GHz, it features a VSWR of 1.3, 50 ohm impedance, and right-angle mounting on cables using crimp termination.
EZ-240-NMH-RA-X
Times Microwave Systems
EZ-240-NMH-RA-X by Times Microwave Systems is an RF N connector with 50 ohm impedance, gold termination finish, and 1.35 VSWR. Ideal for LMR240 cables, it operates from -55 to 125°C, withstands up to 1000VAC, and offers low insertion loss of -0.245 dB for applications requiring durability and high frequency performance up to 6 GHz.
138-4696-011
Vertiv
RF N CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 3500VAC; Durability: 500 Cycles; Cable Types: RG-401;
R161082000
R161082000 N-Type Connector by Radiall S A features low 0.17 dB insertion loss, gold (Au) termination with nickel (Ni) barrier, and 1.2 VSWR. Ideal for RF applications up to 11 GHz, this connector has a threaded coupling type and is designed for 50 ohm characteristic impedance cables with male crimp termination.
M39012/02-0513
Winchester Interconnect
M39012/02-0513 by Winchester Interconnect is an N-Type RF connector with gold-plated contacts, suitable for 50 ohm systems up to 11 GHz. It features a threaded coupling, PTFE insulator, and brass shell with nickel finish. Ideal for military applications due to MIL-C-39012 conformity and reliable crimp termination.
TC-240-NMH-X
RF N CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1050VAC; Cable Types: LMR240; Panel Mount: NO;
23_N-50-0-1/133_NE
Huber+suhner Ag
23_N-50-0-1/133_NE by Huber+suhner Ag is an RF N CONNECTOR with a characteristic impedance of 50 ohm. It features a gold (Au) termination contact finish, PFA/PTFE insulator material, and brass shell material. Ideal for applications requiring durability up to 500 cycles, operating temperatures ranging from -65 to 165 °C, and a max frequency of 11 GHz.
TC-400-NMH-RA-D
L-com
The L-com TC-400-NMH-RA-D is an N-Type RF connector with threaded coupling, PTFE insulator, 50 ohm impedance, and 1.25 VSWR. Ideal for applications up to 11 GHz, it features a right-angle plug design for cable termination using crimp solder method. Suitable for high-frequency communication systems requiring secure locking connections.
138-4694-001
Bel Fuse
Bel Fuse 138-4694-001 N-Type Connector features 5000000000 ohm Insulation Resistance, 0.05 dB Insertion Loss, and 2100VAC Dielectric Withstanding Voltage. Ideal for RF applications up to 18 GHz with RG-402 cable type, this connector offers reliable performance in commercial settings with a durability of 500 cycles.
082-4425
Amphenol 082-4425 is an N-Type Connector with 0.15 dB Insertion Loss, GOLD Termination Contact Finish, and THREADED Coupling Type. Ideal for RF applications up to 11 GHz, it features a 50 ohm Characteristic Impedance and POLYTETRAFLUOROETHYLENE Insulator Material. Suitable for cable mounting with CRIMP termination, this MALE connector offers low VSWR of 1.3.
N1141A1-NT3G-1-50
Amphenol N1141A1-NT3G-1-50 is an RF N connector with threaded coupling, gold finish over nickel, and PTFE insulator. Ideal for cable mounting with clamp crimp termination, this male plug connector is commonly used in straight mounting applications.
172117
Amphenol 172117 N-Type Connector features 3500VAC Dielectric Withstanding Voltage, 1.3 VSWR, and 50 ohm Impedance. Ideal for RF applications up to 11 GHz with threaded coupling and gold contact finish for reliable signal transmission. Suitable for commercial use in panel mount configurations.
138-4408-007
Cinch Connectivity Solutions
RF N CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 1400VAC; Contact Style: COAX; No. of Ports: 1; Total No. of Contacts: 1;
138-4449-007
Bel Fuse's 138-4449-007 N-Type Connector features 5000000000 ohm Insulation Resistance, 0.15 dB Insertion Loss, and 3500VAC Dielectric Withstanding Voltage. Ideal for RF applications with LMR400 cable type, it operates b/w -65 to 165 °C and supports up to 11 GHz frequency.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved