Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Plating Thickness (inch): FLASH; Mounting Style: RIGHT ANGLE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Telecom & Datacom Connectors 73725-11A1RLF attributes and parameters. Explore more Telecom & Datacom Connectors devices from Amphenol Icc
Body Width:
Body Depth:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Insulator Material:
JESD-609 Code:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Ports:
PCB Contact Pattern:
Plating Thickness (inch):
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
73725-11A1RLF Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Amphenol Communications Solutions (ACS), a division of Amphenol Corporation, is a world leader in interconnect solutions for Communications, Mobile Consumer Products, RF, Optical, Broadband and Commercial electronics markets. Amphenol Corporation is one of the world’s largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. ACS has an expansive global presence in research and development, manufacturing, and sales. We design and manufacture a wide range of innovative connectors as well as cable assemblies for diverse applications including server, storage, data center, mobile, RF, networking, industrial, business equipment and automotive.
1N4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
MBR0520LT1G
Onsemi
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
Leshan Radio
LM317TG
Texas Instruments
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
SS14
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
Zetex Plc
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N7002
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
LIS2DH12TR
STMicroelectronics
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
LM107H/883
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
1N4148WS
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Nexperia
Semtech
74441-0001
Molex
Molex 74441-0001 is a telecom/datacom connector with 0.031" mating contact pitch, suitable for board mounting in commercial applications. Features include brass contacts, matte tin finish, and glass-filled polyethylene insulator material. Ideal for right-angle mounting with staggered PCB contact pattern.
TM11R-5M2-88-LP(70)
Hirose Electric
TM11R-5M2-88-LP(70) by Hirose Electric is a Telecom & Datacom Connector with 8 contacts, rated at 1A signal current. It features POLYBUTYLENE TEREPHTHALATE insulator material, Tin (Sn) finish, and operates b/w -55 to 85°C. Ideal for telecom applications requiring durable right-angle mounting with solder termination.
67068-8001
Molex 67068-8001 USB connector features gold termination, glass-filled polyamide insulator, and phosphor bronze contact material. Ideal for telecom/datacom applications with 1000000000 ohm insulation resistance, 750VAC dielectric voltage, and 1500 cycle durability. Operating temperature range from 0 to 50 °C.
48037-0001
The Molex 48037-0001 is a USB connector with a body length of 0.472 inch, body width of 0.177 inch, and body depth of 0.74 inch. It is commonly used in telecom and datacom applications due to its high insulation resistance of 1000000000 ohm and dielectric withstand voltage of 500VAC.
292304-1
TE Connectivity
TE Connectivity's 292304-1 USB connector features POLYETHYLENE insulator, 1000000000 ohm insulation resistance, and 29.92u TIN plating. Ideal for telecom & datacom applications with a rated current of 1A, right angle mounting style, and durability of 1500 cycles.
5749721-7
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 68; Empty Shell: NO; Termination Type: SOLDER;
47151-0001
Molex 47151-0001 is a telecom & datacom connector with 19 contacts, TIN BISMUTH finish, and POLYPHENYLENE insulator. It is a surface mount type connector for board mounting applications in telecom and datacom systems.
472720001
The Molex 472720001 is a telecom & datacom connector with 0.7" body length, 100000000 ohm insulation resistance, and 707VAC dielectric voltage. It features a glass-filled liquid crystal polymer insulator and gold termination finish. Ideal for board mounting in applications requiring high durability and reliability such as telecommunications and data communications.
67643-3910
Molex 67643-3910 USB connector features 4 contacts, with 0.567" body length and 0.274" width. Insulation resistance of 1e9 ohm and dielectric voltage of 750VAC. Ideal for telecom/datacom applications, UL-rated with solderable retention clips for board mounting at -40 to 85°C.
1-1734035-1
TE Connectivity USB Connector 1-1734035-1 features GLASS FILLED POLYAMIDE9T insulator, 100000000 ohm insulation resistance, and 29.92u nickel plating thickness. Ideal for telecom/datacom applications with board mounting option, right angle mounting style, and surface mount termination type.
DX07S024JJ2R1300
Japan Aviation Electronics Industry
DX07S024JJ2R1300 by Japan Aviation Electronics Industry is a USB connector with 24 contacts. It features gold flash over nickel termination, palladium over nickel mating contact finish, and stainless steel shell material. Ideal for telecom & datacom applications requiring female right angle receptacle mounting on board using solder or surface mount termination.
1888653-3
TE Connectivity 1888653-3 is a telecom & datacom connector with EMI shielding, PBT-POLYESTER insulator, and tin termination. It has 8 contacts, rated at 1.5A signal current, suitable for board and panel mounting in commercial applications.
71661-2068
The Molex 71661-2068 is a Telecom & Datacom Connector with 68 contacts, 0.05" mating pitch, and 2.092" body length. It has a dielectric voltage of 500VAC and operates b/w -40°C to 105°C. Ideal for board mounting in telecom and datacom applications due to its solder termination and staggered PCB contact pattern.
48393-0003
Molex 48393-0003 USB connector features POLYETHYLENE insulator, 9 contacts, and 1.8A signal current rating. Ideal for telecom/datacom applications with right-angle mounting and staggered PCB contact pattern.
1703820002
Molex 1703820002 is a Telecom & Datacom Connector with 0.433" body length, 0.211" width, and 300VAC dielectric voltage. It has 20 contacts, UL94V-0 rated, suitable for board mounting in telecom applications. Operating temp range -40 to 85°C with durability of 100 cycles.
33TS3101S-88N
Conec
33TS3101S-88N by Conec is a Telecom & Datacom Connector with GOLD OVER NICKEL termination. Featuring POLYETHYLENE insulator, it has 8 contacts and STAINLESS STEEL shell. Ideal for telecom/datacom applications, this UL 94V-0 rated connector is FEMALE gendered with JACK body style for PANEL mounting.
RJHSE-5380-04
Amphenol Communications Solutions
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Contact Material: PHOSPHOR BRONZE; Termination Type: SOLDER; Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
2040008-2
TE Connectivity's 2040008-2 is an EMI shielded telecom and datacom connector with a polyethylene insulator. It has a max operating temperature of 85°C and a min operating temperature of -40°C. This plug-style connector has 8 contacts and is suitable for cable mounting applications.
215877-1
TE Connectivity's 215877-1 is a telecom and datacom connector with a body length of 0.598", insulation resistance of 500MΩ, and a body width of 0.453". It is commonly used in board mounting applications, offering durability with 750 cycles.
5569381-1
TE Connectivity 5569381-1 is a Telecom & Datacom Connector with EMI shielding, PCT Polyester insulator, and 8 contacts. It operates b/w -40 to 85°C, suitable for telecom applications requiring high insulation resistance and durability of 750 cycles. The right-angle mounting option with solder termination makes it ideal for board and panel installations.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Amphenol Icc
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved