Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol Icc's 10118192-0002LF USB connector features a polyethylene insulator, stainless steel shell, and 5 contacts. Ideal for telecom/datacom applications, it is a female receptacle with surface mount termination and right-angle mounting on board.
Median Price
$0.225
Lifecycle Status
Suppliers In-Stock
33
In-Stock Inventory
1k+
PEI Genesis
1+ parts
$0.160
100+ parts
$0.140
1k+ parts
$0.130
10k+ parts
-
Adafruit Industries
$0.213
Mouser Electronics
$0.430
$0.314
$0.259
DigiKey
$0.313
$0.280
Newark
$0.462
$0.350
$0.296
Heilind Electronics
$0.227
Master Electronics
$0.220
Avnet
$0.201
Arrow
Verical
Chip1Stop
Farnell
$0.353
$0.275
$0.233
Element14
$0.310
$0.246
Powell Electronics
Interstate Connecting
Greenchips
$0.191
$0.182
$0.173
$0.156
Nova Conductors
Bristol Electronics
$0.450
$0.167
$0.117
Maritex
$1.102
$0.293
$0.269
Microfarads
Electro Sonic
$0.175
Vyrian
NAC Semi
$0.305
Chip Stock
IBS Electronics
$0.261
VNN
Sensible Micro Corp
Rutronik
$0.255
ComSIT Distribution GmbH
Rapid Electronics
$0.337
Technoshack Inc.
SIE Connect GmbH - GreenChips
Sea View Technologies
Semicontronic
$0.136
$0.133
$0.132
Corohmni
$0.218
Advanced Electronics
Argo Parts USA
$0.267
Aztec Data Supply Inc.
$7.668
Perfect Parts
Continental Prestige Electronics
$0.180
$0.176
GreenTree Electronics
Glotronic Ltd.
Authorized Procurement Solutions
Netroflash
$0.270
$0.262
$0.256
Polyethylene is a durable and reliable insulating material, providing excellent protection for the contacts within the connector.
Being a USB connector means it is a widely used and standardized interface, ensuring compatibility with a wide range of devices.
Having a UL 94V-0 flammability rating means this connector is highly resistant to catching fire, enhancing safety in usage.
With a total of 5 contacts, this connector can accommodate multiple data or power connections, providing versatility in its applications.
Board mounting makes it easy to securely attach the connector to a PCB, ensuring stable and reliable connections in electronic devices.
Stainless steel shell material offers high corrosion resistance and durability, making the connector suitable for various challenging environments.
Surface mount termination allows for easy and efficient soldering onto PCBs, simplifying the assembly process and ensuring consistent connections.
Female contacts are typically used to receive connections from male connectors, ensuring compatibility with a wide range of devices and cables.
Having a receptacle style provides a secure and stable connection point for mating connectors, preventing accidental disconnections and signal loss.
Right angle mounting allows the connector to be installed at a 90° angle, making it space-efficient and ideal for applications with limited space constraints.
Telecom & Datacom Connectors 10118192-0002LF attributes and parameters. Explore more Telecom & Datacom Connectors devices from Amphenol Icc
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mixed Contacts:
Mounting Style:
Mounting Type:
Option:
Shell Material:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Amphenol Communications Solutions (ACS), a division of Amphenol Corporation, is a world leader in interconnect solutions for Communications, Mobile Consumer Products, RF, Optical, Broadband and Commercial electronics markets. Amphenol Corporation is one of the world’s largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. ACS has an expansive global presence in research and development, manufacturing, and sales. We design and manufacture a wide range of innovative connectors as well as cable assemblies for diverse applications including server, storage, data center, mobile, RF, networking, industrial, business equipment and automotive.
2N2222A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
1N4148WS
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
ISO1050DUBR
Texas Instruments
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
Zowie Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
Boca Semiconductor
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
4554
Jw Miller Magnetics
Other Semiconductors;
SS-6488S-A-NF-1-01
Bel Fuse
Bel Fuse SS-6488S-A-NF-1-01 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 30u plating thickness, and COPPER ALLOY shell. It has 8 contacts in 2 rows, UL 94V-0 flammability code, and SOLDER termination. Ideal for board or panel mounting in telecom applications due to its right angle mounting style and FEMALE contact gender.
32-5958UL
Vertiv
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: PLUG; IEC Conformity: NO; Termination Contact Finish: GOLD;
897-43-004-90-000000
Mill-max Mfg
897-43-004-90-000000 by Mill-max Mfg is a USB connector with 0.474" body length, 1000000000 ohm insulation resistance, and 750VAC dielectric voltage. Ideal for telecom/datacom applications, it features matte tin over nickel termination finish and polyethylene insulator material.
20825000001
Harting Electronics & Kg
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
RJSSE-5381
Amphenol
Amphenol RJSSE-5381 is a Telecom & Datacom Connector with 8 contacts. It features a Dielectric Withstanding Voltage of 1400VAC, Matte Tin termination finish, and Gold mating contact finish. Ideal for board and panel mounting in telecom applications due to its right angle mounting style and female contact gender.
USB4715-GF-A
Global Connector Technology
USB4715-GF-A by Global Connector Technology is a USB connector with 6 contacts, rated at 1.25A signal current. It features a 0.415" body length, 0.187" width, and 0.356" depth, suitable for telecom & datacom applications. With an insulation resistance of 100M ohm and dielectric voltage of 100VAC, it offers durability up to 10k cycles.
78285-0001
Molex
Molex 78285-0001 is a Telecom & Datacom Connector with 16 contacts, gold nickel finish, and glass-filled liquid crystal polymer insulator. It has a mating contact pitch of 0.05", operates b/w -40°C to 105°C, and withstands up to 500VAC. Ideal for board mounting in telecom and datacom applications due to its durability and polarization key feature.
MUSB-K152-30
MUSB-K152-30 by Amphenol is a USB connector with 5 contacts, rated at 1.8A signal current. It has a dielectric voltage of 100VAC and operates b/w -40 to 105°C. Ideal for telecom/datacom applications, it features a polarized housing and staggered PCB contact pattern for secure solder termination.
5000751517
Molex USB connector 5000751517 with 0.303" body length, 100VAC dielectric voltage, and 1A signal current. Ideal for telecom/datacom applications, featuring GLASS FILLED POLYETHYLENE insulator material and COPPER ALLOY contacts. Operating temperature range -40 to 85°C for commercial reliability.
749195-2
TE Connectivity
TE Connectivity's 749195-2 is a EMI shielded connector with 68 contacts, nickel finish, and zinc alloy shell. Ideal for telecom/datacom applications, it features IDC termination, male contact gender, and UL94V-0 flammability rating.
61400826021
Wuerth Elektronik & Kg
61400826021 by Wurth Elektronik is a USB connector with gold finish, suitable for telecom & datacom applications. Featuring a dielectric voltage of 750VAC, insulation resistance of 1Gohm, and operating temperatures from -40 to 105°C. Ideal for board mounting with solderable retention clips and offers durability up to 1500 cycles.
1734035-2
TE Connectivity USB Connector 1734035-2 features Matte Tin finish, Glass Filled Polyamide9T insulator, and Stainless Steel shell. Ideal for telecom/datacom applications with 1A signal current rating, UL Flammability Code 94V-0, and right angle mounting style. Operating temperature range -40 to 85°C ensures reliability in commercial settings.
47151-0001
Molex 47151-0001 is a telecom & datacom connector with 19 contacts, TIN BISMUTH finish, and POLYPHENYLENE insulator. It is a surface mount type connector for board mounting applications in telecom and datacom systems.
6339191-4
TE Connectivity 6339191-4 is a Telecom & Datacom Connector with EMI shielding, Liquid Crystal Polymer insulator, and 8 contacts. It has a body length of 0.64", operates b/w -40 to 85°C, and features a right-angle mounting style. Ideal for telecom and datacom applications requiring high durability and reliability.
47590-1001
47590-1001 by Molex is a USB connector with 5 contacts, made of brass and housed in a stainless steel shell. It has a liquid crystal polymer insulator and matte tin finish. This right-angle receptacle is commonly used in telecom and datacom applications for surface mount board mounting.
90075-0141
The Molex 90075-0141 is a Telecom & Datacom Connector with 0.46" body length, 500M ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for telecom applications, it features matte tin over nickel finish, polycarbonate insulator, and male contact gender.
67298-4090
Molex 67298-4090 USB connector features glass-filled polybutylene terephthalate insulator, solder termination, and right-angle mounting. With 8 contacts in a rectangular PCB pattern, it is ideal for telecom/datacom applications requiring reliable commercial-grade connectivity.
CI94PFIA1A0
Cvilux
Cvilux CI94PFIA1A0 is a Telecom & Datacom Connector with 15 contacts, rated at 7A signal current. It features IDC termination, GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator, and FLASH plating. Ideal for applications requiring polarized housing, UL certification, and operating temperatures from -40 to 105°C.
MUSBR-A111-R0
Amphenol Communications Solutions
USB CONNECTOR; JESD-609 Code: e3; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: MATTE TIN OVER NICKEL; Contact Material: NOT SPECIFIED;
2137160001
TELECOM AND DATACOM CONNECTOR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
10118192-0001LF
Amphenol's 10118192-0001LF USB connector features gold over nickel termination, liquid crystal polymer insulator, and matte tin shell finish. Ideal for telecom/datacom applications, with 100VAC dielectric voltage, 5 contacts, and 80°C max operating temp. Perfect for board mounting with right-angle style and surface mount termination.
10118194-0001LF
The Amphenol Communications Solutions 10118194-0001LF is a USB connector with 5 contacts, rated at 1.8A signal current and featuring a micro USB 2.0 contact style. It has a body length of 0.317", insulation resistance of 1000000000 ohm, and operates b/w -30 to 80 °C. Ideal for telecom & datacom applications, it offers durability up to 10000 cycles and features surface mount termination with a right-angle mounting style.
10118193-0001LF
Amphenol's 10118193-0001LF USB connector features gold flash over nickel termination, liquid crystal polymer insulator, and matte tin shell finish. With a rated current of 1.8A, it is ideal for telecom & datacom applications requiring high durability and reliability in board mounting setups.
10117836-001LF
Amphenol Icc
Amphenol Icc's 10117836-001LF USB connector features a body length of 0.571", insulation resistance of 1G ohm, and dielectric voltage rating of 100VAC. Ideal for telecom/datacom applications, it offers a solder holding flange for board mounting, UL94V-0 flammability rating, and durability up to 3500 cycles.
10117835-002LF
USB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 100VAC; No. of Connectors: ONE; Contact Resistance: 30 mohm;
10117836-002LF
Amphenol Icc's 10117836-002LF USB connector features a body length of 0.571", insulation resistance of 1G ohm, and dielectric voltage withstand of 100VAC. Ideal for telecom/datacom applications, this connector has a durable shell material, solder termination type, and operates b/w -55 to 85 °C.
10113616-01531LF
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; MIL Conformity: NO; Mating Contact Finish: NOT SPECIFIED;
10112628-101LF
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
10118241-001RLF
Amphenol's 10118241-001RLF is a telecom & datacom connector with 0.256" body length, 100M ohm insulation resistance, and 250VAC dielectric voltage. Ideal for board mounting in commercial applications, featuring GLASS FILLED LIQUID CRYSTAL POLYMER insulator material and TIN shell finish.
10114-6000EC
3m Electronic Products Division
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; Body Depth: .323 inch; Maximum Wire Size: 28 AWG;
10118242-001RLF
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; No. of Connectors: ONE;
10112632-101LF
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 300VDC; No. of Connectors: ONE; Rated Current - Signal: .05 A; Contact Material: NOT SPECIFIED;
10118194-0101LF
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 100VAC; Insulation Resistance: 1000000000 ohm; Mounting Type: BOARD;
10119313-301TLF
Amphenol's 10119313-301TLF USB connector features 0.303" body length, 0.154" width, and 0.372" depth. With 5 contacts and matte tin finish, it is ideal for telecom/datacom applications. The connector has glass-filled polyethylene insulator material and solder termination for reliable performance.
10119313-301CLF
USB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; No. of PCB Rows: 2; PCB Contact Row Spacing (mm): 1.8034;
10118194-0011LF
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 100VAC; Insulator Color: BLACK; Insulation Resistance: 1000000000 ohm;
10118194-0002LF
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 100VAC; Empty Shell: NO; Contact Style: MICRO USB 2.0;
10118194-1002LF
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 100VAC; UL Flammability Code: 94V-0; Shell Finish: TIN;
10118194-1011LF
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 100VAC; Insulation Resistance: 1000000000 ohm; Plating Thickness (inch): 30u;
10118194-1101LF
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 100VAC; Insulation Resistance: 1000000000 ohm; Insulator Material: POLYETHYLENE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved