Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MUSBR-3193-M0 USB connector by Amphenol is a right-angle receptacle with 9 contacts, rated for 1.8A signal current and 1500 cycles durability. Featuring matte tin shell finish, it has a polarization key and polyethylene insulator material. Ideal for telecom & datacom applications with -40 to 105°C operating temperature range.
Median Price
$12.930
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$10.149
100+ parts
1k+ parts
10k+ parts
-
Avnet
$12.926
$10.829
TTI
$10.690
Element14
$12.983
$11.584
TTI Europe
$14.374
$11.798
$9.619
Chip1Stop
$15.500
$9.720
$9.100
$8.100
Farnell
$16.256
$13.083
$12.388
Mouser Electronics
$17.730
$13.000
$12.490
Verical
$12.495
Master Electronics
$10.590
$10.460
Future Electronics
$9.590
$9.460
Nova Conductors
$10.581
Vyrian
IBS Electronics
$15.540
$15.357
NAC Semi
$19.300
$17.810
ComSIT Distribution GmbH
Corohmni
$1.831
Semicontronic
$8.120
$7.917
$7.876
Ampacity Inc.
Aztec Data Supply Inc.
$8.403
Advanced Electronics
Continental Prestige Electronics
$12.860
$10.350
Authorized Procurement Solutions
Infinite Electronics LLP (Excess)
Formix International (Excess)
Abacus Technologies
Perfect Parts
Argo Parts USA
GreenTree Electronics
Glotronic Ltd.
Eastek
Netroflash
$10.369
$10.052
$9.840
Assy Fe
The compact body length makes this connector easy to fit in tight spaces, ideal for applications where space is limited.
High insulation resistance ensures reliable performance and prevents signal interference, making it a durable and stable connector choice.
With a high dielectric voltage rating, this connector can withstand voltage fluctuations without compromising safety or performance.
The matte tin over nickel finish provides excellent conductivity and corrosion resistance, ensuring a long-lasting and reliable connection.
With a high maximum operating temperature, this connector can withstand heat and environmental conditions, making it suitable for a wide range of applications.
The board and panel mounting option provides flexibility in installation, allowing the connector to be securely mounted on different surfaces for versatile use.
The zinc alloy shell material offers durability and protection, making the connector resistant to wear and tear in demanding environments.
Copper alloy contacts ensure high conductivity and low contact resistance, resulting in a reliable and efficient electrical connection.
Telecom & Datacom Connectors MUSBR-3193-M0 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Amphenol Communications Solutions
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of PCB Rows:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Shell Finish:
Shell Material:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
MUSBR-3193-M0 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Amphenol Communications Solutions (ACS), a division of Amphenol Corporation, is a world leader in interconnect solutions for Communications, Mobile Consumer Products, RF, Optical, Broadband and Commercial electronics markets. Amphenol Corporation is one of the world’s largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. ACS has an expansive global presence in research and development, manufacturing, and sales. We design and manufacture a wide range of innovative connectors as well as cable assemblies for diverse applications including server, storage, data center, mobile, RF, networking, industrial, business equipment and automotive.
2N2222A
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
1N4148
Frontier Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
Onsemi
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
Eic Semiconductor
BAV99
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Sprague
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Fairchild Semiconductor
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
NC7WZ17P6X
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
2N7002
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
Shenzhen Yixinsemi Electronics
BSS138
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
67803-8020
Molex
Molex 67803-8020 USB connector with 5 contacts, 0.39"x.157"x.354" dimensions, and GLASS FILLED POLYAMIDE insulator is ideal for telecom/datacom applications. Features include TIN termination finish, solder holding flange for board mounting, and 30u plating thickness. Operating temp range: 0-50°C.
PX0845/A
Bulgin
Bulgin's PX0845/A USB connector features gold termination, polyamide6 insulator, and nickel shell finish. Ideal for telecom/datacom applications, with 4 contacts, solder termination, and steel shell material. Male contact gender suitable for board/panel mounting in 94V-0 UL flammability code environments.
TDS8PC5
L-com
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Mixed Contacts: NO; Mounting Style: STRAIGHT; Contact Style: TELCOM, MODULAR; Shell Finish: NICKEL;
MUSB-05-S-B-SM-A-TR
Samtec
Samtec MUSB-05-S-B-SM-A-TR is a USB connector with 5 contacts, matte tin finish, and phosphor bronze material. It has a durability of 1500 cycles and operates b/w -50 to 85°C. Ideal for telecom/datacom applications due to its right-angle mounting style and surface mount termination.
IX80G-A-10P
IX80G-A-10P by Hirose Electric is a Telecom & Datacom Connector with GOLD contact finish, POLYAMIDE insulator, and TIN shell. It has 10 contacts, suitable for BOARD AND PANEL mounting in applications like TELECOM AND DATACOM. Compatible mating connector: IX30G-A-10S-CV(7.0).
FCN-361J008-AU
Fujitsu
FCN-361J008-AU by Fujitsu is a Telecom & Datacom Connector with 8 contacts, rated at 3A signal current. It features gold-silver contact finish, copper alloy material, and polyester insulation for high reliability in commercial applications. With a mating contact pitch of 0.1 inch, this connector is suitable for telecom and datacom systems operating b/w -55°C to 85°C.
UX60SA-MB-5ST(80)
TELECOM AND DATACOM CONNECTOR; Manufacturer Series: UX60SA-MB-5ST(80);
1051330001
Molex 1051330001 USB connector with gold termination, polyethylene insulator, and stainless steel shell. Ideal for telecom/datacom applications with UL standard compliance. Features include 1000000000 ohm insulation resistance, 140VAC dielectric voltage, and -30 to 85°C operating temperature range.
632723100011
Wuerth Elektronik & Kg
632723100011 by Wurth Elektronik is a USB connector with 24 contacts, gold finish, and liquid crystal polymer insulator. Ideal for telecom/datacom applications, it features brass contacts, solder/surface mount termination, and 94V-0 flammability rating.
SI-46014-F
Bel Fuse
Bel Fuse SI-46014-F is a Telecom & Datacom Connector with 0.67" x 0.64" x 0.67" dimensions. Featuring GOLD finish, POLYETHYLENE insulator, and NICKEL/TIN shell, it has 8 contacts for board mounting. Ideal for telecom and datacom applications requiring polarized housing and solder termination in a straight jack style connector.
PCR-E96LMD+
Honda Tsushin Kogyo
PCR-E96LMD+ by Honda Tsushin Kogyo is a 96-contact telecom/datacom connector with 0.05" pitch, gold-plated contacts, and UL94V-0 flammability rating. It features a dielectric strength of 1100VAC, operating temperatures from -55 to 105°C, and solder termination for board mounting applications. Ideal for commercial use in telecommunications and data communication systems requiring high reliability.
ZX62WD1-B-5PC
ZX62WD1-B-5PC by Hirose Electric is a telecom & datacom connector with 5 contacts, gold termination, and liquid crystal polymer insulator. It has a dielectric voltage of 100VDC and operates b/w -30 to 85°C. Ideal for board mounting in applications requiring durable connectors with high reliability.
2174507-2
TE Connectivity
TE Connectivity's 2174507-2 USB Connector features Polyethylene insulator, Tin shell finish, and 29.52u plating thickness. Ideal for telecom/datacom applications with board mounting option, surface mount termination, and 1.8A signal current rating.
2301995-3
TE Connectivity's 2301995-3 is a Telecom & Datacom Connector with EMI shielding. Featuring LCP insulator, it has 8 contacts and operates b/w -40 to 85°C. Ideal for board mounting applications due to its BOARD LOCK option.
1-338086-6
TE Connectivity 1-338086-6 is a Telecom & Datacom Connector with 0.526" body length, 0.551" body width, and 500M ohm insulation resistance. It's a female jack connector for telecom applications, rated at 1.5A signal current with surface mount termination.
1734795-1
TE Connectivity's 1734795-1 is a telecom and datacom connector with a body length of 0.637 inch, insulation resistance of 200000000 ohm, and EMI shielding. It is used for board mounting in applications requiring a durable, right angle jack connector with a rated current of 1A.
UJ31-CH-G-SMT-TR-67
Cui Devices
UJ31-CH-G-SMT-TR-67 by CUI Devices is a Telecom & Datacom Connector with 24 contacts, POLYAMIDE10T insulator, and 100VAC dielectric voltage. It features a 0.386" body length, 0.167" width, and 0.384" depth. Ideal for telecom/datacom applications requiring high insulation resistance and durability in temperatures ranging from -25 to 85°C.
5-2301994-7
TE Connectivity's 5-2301994-7 is an EMI shielded telecom and datacom connector with a body depth of 0.537 inch. It has a liquid crystal polymer insulator material and can be board mounted using the board lock option. This connector has a max operating temperature of 85°C and is UL certified with a flammability code of 94V-0.
2013595-3
TE Connectivity's 2013595-3 is a Telecom & Datacom Connector with EMI shielding, polyethylene insulator, and nickel shell finish. With UL certification and 8 contacts, it operates b/w -40 to 85°C for applications in telecom and datacom systems requiring polarized connectors with a rated current of 1.5A.
09454521923
Harting Electronics & Kg
TELECOM AND DATACOM CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MUSBR-M1C1-M0
Amphenol Communications Solutions
The Amphenol MUSBR-M1C1-M0 USB connector features 24 contacts, rated at 5A signal current. With a dielectric voltage of 500VAC and insulation resistance of 1Gohm, it is ideal for telecom applications. Its compact dimensions (0.925" x 0.346" x 0.491") make it suitable for board and panel mounting in various datacom setups.
MUSBR-M1C1-30
MUSBR-M1C1-30 by Amphenol is a USB connector with 24 contacts, rated for 5A signal current. It features a dielectric voltage of 500VAC and insulation resistance of 1000000000 ohm. Ideal for telecom & datacom applications, it has a durable zinc alloy shell and operates b/w -40 to 105 °C.
MUSBR-M5C1-30
MUSBR-M5C1-30 by Amphenol is a USB connector with 24 contacts, rated at 5A signal current. It features a zinc alloy shell, matte tin finish, and polyethylene insulator for durability. Suitable for telecom & datacom applications with operating temperatures from -40 to 105°C.
MUSB-K152-30
Amphenol
MUSB-K152-30 by Amphenol is a USB connector with 5 contacts, rated at 1.8A signal current. It has a dielectric voltage of 100VAC and operates b/w -40 to 105°C. Ideal for telecom/datacom applications, it features a polarized housing and staggered PCB contact pattern for secure solder termination.
MUSB-05-S-B-SM-A
USB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Minimum Operating Temperature: -50 Cel;
MUSB-C111-30
MUSB-C111-30 by Amphenol is a USB connector with 1.201" body length, 1000000000 ohm insulation resistance, and 500VAC dielectric voltage. It is ideal for telecom & datacom applications, featuring POLYETHYLENE insulator material, GOLD mating contact finish, and a durability of 1500 cycles. With a rated current of 1.5A and UL flammability rating of 94V-0, this connector offers reliable performance in commercial settings.
MUSB-A511-00
MUSB-A511-00 by Amphenol is a USB connector with 4 contacts, rated at 1.5A signal current. It features a dielectric voltage of 500VAC, insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for telecom/datacom applications, it has a zinc alloy shell, gold mating contacts over nickel, and solder termination for reliability (UL94V-0).
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Shell Material: ZINC ALLOY; No. of Ports: 1; Insulator Color: BLACK;
MUSB-A-S-RA-TSMT
Adam Tech
USB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 100VAC; No. of Connectors: ONE; Rated Current - Signal: 1 A;
USB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
MUSB-05-S-AB-SM-A
Samtec's MUSB-05-S-AB-SM-A is a USB connector with 5 contacts, POLYAMIDE6T insulator, and PHOSPHOR BRONZE contact material. It has a durability of 1500 cycles and operates b/w -50 to 85°C. Ideal for telecom/datacom applications, it offers a right-angle mounting style with surface mount termination for reliable signal transmission.
MUSBR-A111-R0
USB CONNECTOR; JESD-609 Code: e3; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: MATTE TIN OVER NICKEL; Contact Material: NOT SPECIFIED;
MUSB-C511-00
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE; Mounting Type: BOARD AND PANEL;
MUSB-E151-34
USB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 100VAC; No. of Connectors: ONE;
MUSB-A511-004
MUSB-A511-004 by Amphenol is a USB connector with a body length of 1.181", body width of 0.709", and body depth of 0.637". It is commonly used in telecom and datacom applications, offering a rated current of 1.5A, insulation resistance of 1000000000 ohm, and dielectric withstand voltage of 500VAC.
MUSBR-4193-M0
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Insulator Color: BLACK; Reference Standard: UL;
MUSB-05-F-B-SM-A-FR
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; UL Flammability Code: 94V-0; Durability: 1500 Cycles; Reference Standard: UL;
MUSBR-M5C1-M0
MUSBR-M5C1-M0 by Amphenol is a USB connector with 24 contacts, rated at 5A signal current. It features a matte tin shell finish, polyethylene insulator material, and matte tin over nickel termination contact finish. Ideal for telecom & datacom applications, it has a temperature range of -40 to 105°C and UL94V-0 flammability rating.
MUSB-05-F-B-SM-A-K
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Minimum Operating Temperature: -50 Cel; Shell Material: BRASS; Durability: 1500 Cycles;
MUSB-05-F-B-SM-A-R-TR
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Pattern: RECTANGULAR; Polarization Key: POLARIZED HOUSING; Insulator Color: BLACK;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved