Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol's 54601906WPLF is a Telecom & Datacom Connector with 0.52" body length, 500M ohm insulation resistance, and 1400VAC dielectric voltage. Ideal for board mounting applications in telecom and datacom systems due to its durable design and reliable performance.
Median Price
$0.444
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Arrow
1+ parts
$0.309
100+ parts
$0.234
1k+ parts
$0.215
10k+ parts
-
Mouser Electronics
$0.450
$0.303
$0.293
$0.227
DigiKey
$0.630
$0.397
$0.300
$0.258
Master Electronics
$0.865
$0.499
$0.423
Element14
$0.368
$0.332
Farnell
$0.463
$0.363
$0.349
TTI Europe
$0.247
$0.220
Verical
$0.373
Chip1Stop
$0.380
Nova Conductors
$0.233
Rutronik
$0.239
$0.230
$0.226
Maritex
$1.228
Electro Sonic
$0.259
NAC Semi
$0.307
Vyrian
Amar Radio Corporation
IBS Electronics
$0.312
VNN
TME
$0.304
$0.271
$0.238
Semicontronic
$0.210
$0.205
$0.204
Ampacity Inc.
Continental Prestige Electronics
$0.231
Argo Parts USA
$0.225
Bastille Electronics
$0.221
$0.207
Corohmni
$1.890
Aztec Data Supply Inc.
$4.958
Perfect Parts
GreenTree Electronics
Glotronic Ltd.
Kepictronics
Authorized Procurement Solutions
Eastek
The compact body length of 0.52 inch makes this connector suitable for applications with limited space constraints.
High insulation resistance of 500000000 ohm ensures reliable performance and prevents signal interference.
With a slim body width of 0.453 inch, this connector can easily fit into tight spaces on a circuit board.
The high dielectric voltage of 1400VAC ensures safety and protection against electrical breakdown.
The matte tin finish with nickel barrier provides excellent conductivity and corrosion resistance for long-lasting connections.
The depth of 0.709 inch allows for secure attachment to the circuit board while maintaining a low profile.
The use of polyethylene as the insulator material offers good insulation properties and durability.
The split board lock mounting option makes installation easy and secure, ensuring the connector stays in place during use.
The 15u plating thickness provides a protective layer against wear and tear, extending the connector's lifespan.
Specifically designed for telecom and datacom applications, this connector meets industry standards for reliable performance.
The UL 94V-0 flammability rating ensures that this connector is safe to use in various environments.
With a rated current of 2 A for signals, this connector can handle high-frequency transmissions with ease.
The black insulator color provides a sleek and professional look to the connector.
Compliant with UL standards, this connector meets stringent regulatory requirements for quality and safety.
With 6 contacts, this connector allows for multiple connections within a single component.
With a durability rating of 250 cycles, this connector can withstand repeated use without compromising performance.
Designed for easy mounting on a circuit board, this connector simplifies installation processes.
The use of glass-filled polyamide66 as the shell material enhances strength and impact resistance for the connector.
The terminal pitch of 2.54mm provides compatibility with standard circuit board layouts.
The staggered PCB contact pattern allows for efficient signal transmission and connection stability.
The solder termination type provides a secure and permanent connection for optimal performance.
The female contact gender ensures compatibility with corresponding male connectors for seamless integration.
With a low contact resistance of 25 mohm, this connector ensures minimal signal loss and reliable conductivity.
The jack-style body or shell design offers versatility and compatibility with various device configurations.
The right-angle mounting style allows for easy cable routing and space-saving installation.
The telecom modular contact style is commonly used in telecom and datacom applications for efficient signal transmission.
The terminal length of 0.148 inch provides a secure connection point for wires or cables.
The locking mounting option ensures a stable and secure connection between the connector and the circuit board.
Designed for commercial applications, this connector offers reliable performance and long-term durability.
Telecom & Datacom Connectors 54601906WPLF attributes and parameters. Explore more Telecom & Datacom Connectors devices from Amphenol Communications Solutions
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Manufacturer Series:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Material:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
54601906WPLF Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Amphenol Communications Solutions (ACS), a division of Amphenol Corporation, is a world leader in interconnect solutions for Communications, Mobile Consumer Products, RF, Optical, Broadband and Commercial electronics markets. Amphenol Corporation is one of the world’s largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. ACS has an expansive global presence in research and development, manufacturing, and sales. We design and manufacture a wide range of innovative connectors as well as cable assemblies for diverse applications including server, storage, data center, mobile, RF, networking, industrial, business equipment and automotive.
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99-7-F
Multicomp Pro
2N7002
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
2N2222A
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
MBR0520LT3G
Onsemi
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
1N4148
Won-top Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
LM2931Z-5.0G
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
100616-2
TE Connectivity
TE Connectivity's 100616-2 is a Telecom & Datacom Connector with EMI shielding, POLYBUTYLENE TEREPHTHALATE insulator, and TIN shell finish. It has 8 contacts, rated at 1.5A for signal current, suitable for board mounting applications in telecommunications and data communication systems.
GSB422137EU
Amphenol Communications Solutions
GSB422137EU by Amphenol is a USB connector with 9 contacts, gold over nickel mating finish, and tin termination with nickel barrier. It is made of brass shell material and polybutylene terephthalate insulator for telecom/datacom applications on boards. UL 94V-0 rated for high flammability resistance.
61729-1011BLF
Amphenol's 61729-1011BLF is a USB connector with 4 contacts, rated at 1A signal current. It features a dielectric voltage of 750VAC and insulation resistance of 1000000000 ohm. Ideal for telecom/datacom applications, it has a durable design with a temperature range from -55 to 85°C.
2-6339191-1
TE Connectivity 2-6339191-1 is a Telecom & Datacom Connector with EMI shielding, Liquid Crystal Polymer insulator, and 500M ohm insulation resistance. Ideal for telecom applications, it features a right-angle jack body style and surface mount termination for durability in commercial settings.
2007492-8
TE Connectivity's 2007492-8 is a Telecom & Datacom Connector with 40 contacts, operating from -55 to 105°C. It features press-fit termination, UL94V-0 flammability rating, and is suitable for board mounting applications.
MP1010RX-1000S
Kycon
The Kycon MP1010RX-1000S is a telecom & datacom connector with 1010 contacts, gold flash finish, and copper alloy material. It has an insulation resistance of 500M ohm, dielectric voltage of 1400VAC, and operates b/w -55 to 85°C. Ideal for commercial applications requiring reliable wire termination in round cable setups.
USB4080-03-A
Global Connector Technology
USB4080-03-A by Global Connector Technology is a USB connector with 24 contacts, rated at 0.25A signal current. It features a dielectric voltage of 100VAC and insulation resistance of 100MΩ. Ideal for telecom & datacom applications, it has a right-angle mounting style and liquid crystal polymer insulator material.
292303-5
TE Connectivity's 292303-5 USB connector has a body length of 0.575", insulation resistance of 1Gohm, and operates b/w -55 to 85°C. With a total of 4 contacts, it is used in telecom & datacom applications for board mounting with solderable retention clips.
5520250-3
TE Connectivity's 5520250-3 is a Telecom & Datacom Connector with 0.625" body length, 500M ohm insulation resistance, and 0.635" body width. Ideal for board mounting with split board lock option, it features POLYBUTYLENE TEREPHTHALATE insulator material.
124018312112A
USB CONNECTOR; Option: WATERPROOF; Contact Gender: FEMALE; IEC Conformity: NO; Filter Feature: NO; Termination Contact Finish: Gold Flash (Au) - with Nickel (Ni) barrier;
72309-8034BLF
The Amphenol Communications Solutions 72309-8034BLF is a USB connector with matte tin over nickel finish. It features a dielectric voltage of 750VAC, insulation resistance of 1Gohm, and operates b/w -55 to 85°C. Ideal for telecom & datacom applications, it offers durability up to 1500 cycles and complies with UL standards.
5520251-4
TE Connectivity's 5520251-4 is a Telecom & Datacom Connector with 0.7" body length, 0.63" width, and 0.635" depth. It has gold termination finish, PBT-POLYESTER insulator material, and operates b/w -40 to 85°C. Ideal for telecom/datacom applications due to its UL-rated reliability, polarized housing, and female contact gender.
1734366-1
Tyco Electronics Amp
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Minimum Operating Temperature: -40 Cel; No. of Rows Loaded: 1;
UX60SC-MB-5ST
Hirose Electric
The Hirose Electric UX60SC-MB-5ST is a USB connector with 5 contacts, featuring a tin finish and surface mount termination. Ideal for telecom & datacom applications, it offers a right-angle mounting style and copper alloy shell material. The connector is UL 94V-0 flammability rated, with a filter feature for improved performance.
1-1546412-1
TE Connectivity 1-1546412-1 is a Telecom & Datacom Connector with ABS insulator, operating temp -20 to 80°C. Features polarized housing, 8 contacts, rated current 1.5A. Ideal for telecom and datacom applications requiring panel mounting with solder termination.
UJ2-MIBH-4-MSMT-TR
Cui Devices
UJ2-MIBH-4-MSMT-TR by CUI Devices is a USB connector with 5 contacts, rated at 1.8A signal current. It features liquid crystal polymer insulation, 10000 cycle durability, and operates b/w -25 to 85°C. Ideal for telecom & datacom applications requiring a right-angle board mount option.
12401899E412A
The Amphenol Communications Solutions 12401899E412A is a USB connector with 24 contacts, rated for 5A signal current. It features a dielectric voltage of 100VAC and insulation resistance of 100M ohm, suitable for telecom and datacom applications. With a waterproof option and stainless steel shell material, it offers durability with 10k cycles.
2174507-2
TE Connectivity's 2174507-2 USB Connector features Polyethylene insulator, Tin shell finish, and 29.52u plating thickness. Ideal for telecom/datacom applications with board mounting option, surface mount termination, and 1.8A signal current rating.
IX61G-A-10P(01)
TELECOM AND DATACOM CONNECTOR; Termination Contact Finish: GOLD; JESD-609 Code: e4;
1734100-4
TE Connectivity's 1734100-4 is a Telecom & Datacom Connector with 40 contacts, 1A signal rating, and 600 cycle durability. Featuring a mating contact pitch of 0.05", it uses Matte Tin finish contacts for applications requiring high insulation resistance and UL94V-0 flammability compliance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
54602-908LF
54602-908LF by Amphenol is a telecom & datacom connector with 0.602" body length, 500M ohm insulation resistance, and 1400VAC dielectric voltage. Ideal for board mounting in applications requiring a durable, right-angle female jack connector with solder termination and UL certification.
54601908WPLF
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; DIN Conformance: NO;
54601906002WPLF
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Body or Shell Style: JACK;
54602-910LF
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Filter Feature: NO;
54601208WPLF
Amphenol Icc
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Durability: 250 Cycles; Contact Style: TELCOM, MODULAR;
5460106LF
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Plating Thickness (inch): FLASH; No. of Ports: 1;
5460106001WPLF
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Insulator Color: BLACK;
5460106001LF
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Mounting Style: RIGHT ANGLE; Insulator Color: BLACK;
5460106002LF
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Body Width: .453 inch; Mounting Option-1: LOCKING;
54601206LF
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Terminal Length: .148 inch;
54601-906LF
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Mounting Style: RIGHT ANGLE;
54601606001LF
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Insulation Resistance: 500000000 ohm;
54601606002LF
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Additional Features: ROHS COMPLIANT;
54601606002WPLF
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Insulator Color: BLACK;
54601708WPLF
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; No. of Ports: 1;
54601806001LF
54601808WPLF
54601906001LF
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; MIL Conformity: NO;
54601906001WPLF
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Manufacturer Series: 54601;
54601906002LF
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved