Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Amphenol 10045722-101LF is a board connector with 120 contacts, POLYETHYLENE insulator, and COPPER ALLOY contact material. It has a mating pitch of 0.118", withstands up to 500VAC, and operates at max temp of 85°C. Ideal for applications requiring durable connectors with high insulation resistance and UL certification.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
< 1k
VNN
1+ parts
100+ parts
1k+ parts
10k+ parts
Nova Conductors
Prism Electronics
Ampacity Inc.
$9.500
Continental Prestige Electronics
Argo Parts USA
Netroflash
Perfect Parts
Close contact pitch allows for more connections in a smaller space, making this product ideal for applications requiring high density connections.
The appropriate body length ensures compatibility with standard connector configurations and makes installation easier.
High insulation resistance ensures minimal signal loss and prevents interference, making this product reliable for high performance applications.
Withstanding high voltage ensures safety and reliability in electrical applications.
The tin finish with nickel barrier provides excellent conductivity and corrosion resistance, ensuring reliable connections over time.
The appropriate body depth allows for secure mounting and stability in various applications.
Polyethylene insulator material is known for its durability, heat resistance, and electrical insulation properties.
Multiple rows loaded allow for more connections, making this product suitable for complex electronic systems.
High operating temperature tolerance ensures reliable performance in various environmental conditions.
Copper alloy contact material offers excellent conductivity and durability, ensuring long-lasting performance.
Headers & Edge Type Connectors 10045722-101LF attributes and parameters. Explore more Headers & Edge Type Connectors devices from Amphenol Communications Solutions
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Polarization Key:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
10045722-101LF Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Amphenol Communications Solutions (ACS), a division of Amphenol Corporation, is a world leader in interconnect solutions for Communications, Mobile Consumer Products, RF, Optical, Broadband and Commercial electronics markets. Amphenol Corporation is one of the world’s largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. ACS has an expansive global presence in research and development, manufacturing, and sales. We design and manufacture a wide range of innovative connectors as well as cable assemblies for diverse applications including server, storage, data center, mobile, RF, networking, industrial, business equipment and automotive.
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
SMBJ18CA
Taiwan Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
2N2222A
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
First Components International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Micro Commercial Components
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
2N7002DWH6327XTSA1
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
BAV99
Zetex Plc
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
2N7002
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
Telefunken Microelectronics
Bkc Semiconductors
TMM-106-01-L-S
Samtec
The Samtec TMM-106-01-L-S is a board connector with 6 contacts, featuring a mating contact pitch of 0.079", matte tin termination finish, and phosphor bronze contact material. It has a max operating temperature of 125°C and min of -55°C, making it suitable for commercial applications requiring reliable signal transmission on PCBs with rectangular contact patterns.
S5B-PH-SM4-TB(LF)(SN)
J S T Mfg
S5B-PH-SM4-TB(LF)(SN) by J S T Mfg is a 5-contact board connector with tin finish over copper. It has a terminal pitch of 2mm and is surface mountable, suitable for right angle mounting applications. Ideal for use in electronics requiring male contact gender and UL94V-0 flammability rating.
DT06-08SA-P012
Deutsch
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE; Mounting Type: CABLE;
S6B-ZR-SM4A-TF(LF)(SN)
S6B-ZR-SM4A-TF(LF)(SN) by J S T Mfg is a 6-contact board connector with mating pitch of 0.059", body width of 0.146", and termination finish of Tin over Copper. It is used in applications requiring surface mount connectors with male contact gender, right angle mounting style, and operating temperatures ranging from -25 to 85°C.
61301011121
Wuerth Elektronik & Kg
61301011121 by Wurth Elektronik is a board connector with 10 contacts, rated at 3A signal current. Featuring gold over nickel termination finish, it has a mating contact pitch of 0.1", insulation resistance of 1Gohm, and operates b/w -40 to 125°C. Ideal for commercial applications requiring reliable connections on PCBs.
853-43-030-30-001000
Mill-max Mfg
853-43-030-30-001000 by Mill-max Mfg is a 2-row, 30-contact board connector with TIN finish. Featuring a terminal pitch of 1.27mm, it is designed for surface mount applications. This female socket connector has a straight mounting style and is ideal for various electronic devices.
22-01-3087
Molex
The Molex 22-01-3087 is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. Featuring a dielectric voltage of 700VAC and insulation resistance of 1Gohm, it operates b/w -40 to 105°C. With a removable contact block design, it has 8 contacts and is UL94V-0 rated for applications requiring durability and reliability in commercial settings.
2201778-1
TE Connectivity
TE Connectivity 2201778-1 is a PCB connector with 0.04" mating contact pitch, 0.549" body length, and 100000000 ohm insulation resistance. It is used in applications requiring a female compression contact style, right angle mounting, and surface mount termination for commercial reliability.
B6B-PH-SM4-TB(LF)(SN)
B6B-PH-SM4-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 2A signal current, and 800VAC dielectric voltage. Ideal for PCB applications requiring POLYAMIDE66 insulator, COPPER ALLOY contacts, and TIN COPPER finish in a compact 0.628"x.197"x.26" body.
04T-JWPF-VSLE-S
BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; DIN Conformance: NO; IEC Conformity: NO; Contact Material: NOT SPECIFIED; MIL Conformity: NO;
823-22-020-10-001101
823-22-020-10-001101 by Mill-max Mfg is a board stacking connector with 20 contacts in 2 rows. It features gold over nickel termination, UL94V-0 flammability rating, and solder termination type. Ideal for applications requiring reliable male connectors with straight mounting style.
1-2199119-5
TE Connectivity 1-2199119-5 is a card edge connector with 67 contacts, rated at 0.5A. It has a mating contact pitch of 0.019", operates b/w -40 to 80°C, and features a polarized design for secure connections. Ideal for board mounting applications requiring high reliability and signal integrity.
09-50-3031
Molex 09-50-3031 is a board connector with 0.156" mating contact pitch, 0.464"x.25"x.625" body dimensions, and polyamide insulator material. It has 3 contacts, female gender, and bellowed type contact style for cable mounting applications. The UL-approved connector features a natural insulator color and locking mounting option for commercial reliability.
FTSH-105-01-L-DV-007-K
Samtec's FTSH-105-01-L-DV-007-K is a 2-row, 9-contact board connector with a contact pitch of 0.05". It features liquid crystal polymer insulator material, tin termination finish, and operates b/w -55°C to 125°C. Ideal for applications requiring high signal current capacity and reliable surface mount connections.
43025-0600
The Molex 43025-0600 is a board connector with 6 contacts, rated at 2.5A signal current. It features a 0.388" body length, 0.326" width, and 0.551" depth made of POLYAMIDE insulator material. With UL Flammability Code 94V-0, it operates b/w -40 to 105°C and is ideal for commercial applications requiring high insulation resistance up to 1Gohm.
22-05-3021
Molex 22-05-3021 is a board connector with 2 contacts, featuring a mating contact pitch of 0.1" and body dimensions of 0.2"x0.25"x0.442". It uses matte tin/copper termination finish, brass contacts, and polyamide insulator material. Ideal for commercial applications requiring a reliable right-angle mounting style with solder termination.
1-2103124-1
TE Connectivity 1-2103124-1 is a BOARD CONNECTOR with GLASS FILLED POLYAMIDE insulator. It has 2 contacts, S0P2 arrangement, and operates b/w -40 to 140°C. Ideal for commercial applications requiring a MALE connector with BLADE PIN-SKT style in a RECEPTACLE shell.
DT06-6S-CE05
The TE Connectivity DT06-6S-CE05 is a 2-row board connector with 6 contacts, rated for 13A signal current and 250V voltage. With a body length of 1.268", it features glass-filled polyamide insulation, operates b/w -55°C to 125°C, and has a durability of 100 cycles. Ideal for commercial applications requiring reliable connections in harsh environments.
S6B-PH-SM4-TB(LF)(SN)
S6B-PH-SM4-TB(LF)(SN) by J S T Mfg is a 6-contact board connector with 0.079" pitch, 800VAC dielectric voltage, and -25 to 85°C operating range. Ideal for PCB applications requiring male contact, surface mount termination, and right-angle mounting.
1-102387-1
TE Connectivity 1-102387-1 is a 2-row board connector with 60 contacts, rated at 3A signal current. Featuring a mating contact pitch of 0.1", it has a body length of 3.1" and operates b/w -65°C to 105°C. Ideal for commercial applications requiring reliable female connectors with crimp termination in black polyethylene insulator material.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
10046971-003LF
Amphenol Communications Solutions
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; No. of Connectors: ONE;
10042867-50MB10ELF
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 200VAC; Rated Current - Signal: .4 A;
10042867-40MB10ELF
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 200VAC; Termination Type: SURFACE MOUNT;
10046971-019LF
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 50; Filter Feature: NO; Terminal Pitch (mm): 2.54;
10045722-101
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved