Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Width: 7.62 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
MARBEL Systems
$3.336
Kenton Components
$4.602
$4.050
Texas Native Microelectronics
$5.345
$5.131
$4.971
$4.704
Semicontronic
$8.000
$7.800
$7.760
Ampacity Inc.
$9.000
Qasali Group International
$10.354
$9.630
$9.112
One Stop Electronics
$29.000
Northwest PG Solutions
$3.540
Supply Digital
Corphita
Corohmni
Native Components
$3.504
EEPROM EPC1064PI attributes and parameters. Explore more EEPROM devices from Altera
Additional Features:
JESD-30 Code:
JESD-609 Code:
Length:
Memory Density:
Memory IC Type:
Memory Width:
No. of Functions:
No. of Terminals:
No. of Words:
No. of Words Code:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Organization:
Output Characteristics:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Parallel or Serial:
Qualification:
Maximum Seated Height:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
EPC1064PI Memory ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.32.00.51
SB
8542.32.00.50
PCN Obsolescence/ EOL - EPC/CS/CQ Device EOL 1/Jun/2017
PCN Packaging - All Dev Pkg Chg 1/Aug/2018
1N4148WS
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Onsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
L7805CV
STMicroelectronics
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
2N2222A
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
International Devices
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
BAV99
National Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
AT24C256C-SSHL-B
Microchip Technology
Microchip AT24C256C-SSHL-B is a 32Kx8 EEPROM with I2C serial bus, operating at 1MHz. It has 1000000 write/erase cycles, -40 to 85°C temp range, and 3mA max supply current. Ideal for industrial applications requiring reliable non-volatile memory storage in compact designs.
M24512-WMN6P
M24512-WMN6P by STMicroelectronics is an EEPROM with 64KX8 organization, operating at 5V. It features a serial interface with I2C control byte and offers 4000000 write/erase cycles. With a small outline package style, it is ideal for industrial applications requiring reliable non-volatile memory storage.
AT24C64D-XHM-T
Atmel
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR; Length: 4.4 mm;
DS2433+
Maxim Integrated
DS2433+ by Maxim Integrated is a 4096-bit EEPROM with 50000 Write/Erase Cycles. It operates at 5V, has a temperature range of -40 to 85°C, and uses a serial bus type: 1-WIRE. Ideal for industrial applications requiring reliable non-volatile memory storage in a compact cylindrical package.
AT24CM02-SSHM-B
AT24CM02-SSHM-B by Microchip is a 256KX8 EEPROM with I2C control byte. Operating at 3V, it offers 1MHz clock frequency and industrial temperature grade. Ideal for applications requiring high endurance, such as data logging and configuration storage.
AT21CS01-STUM17-T
Microchip Technology's AT21CS01-STUM17-T is a 1024-bit EEPROM with I2C serial bus, offering 1000000 write/erase cycles. Operating at -40 to 85°C, it has a supply voltage range of 1.7V to 3.6V and standby current of 0.0000025Amp. Ideal for industrial applications requiring reliable non-volatile memory storage in compact designs.
DS1961S-F5#
DS1961S-F5# by Maxim Integrated is a 1-WIRE EEPROM with 1024-bit memory density. Operating at 3.3V, it has a temperature range of -20 to 85°C and synchronous mode. Ideal for secure authentication applications due to its serial interface and compact disk button package style.
M95M01-RMN6TP
M95M01-RMN6TP by STMicroelectronics is a 128Kx8 EEPROM with SPI serial bus type, 1.27mm terminal pitch, and 5MHz clock frequency. It operates in industrial temperature range (-40 to 85°C) and offers 1000000 write/erase cycles endurance. Ideal for applications requiring reliable non-volatile memory storage in compact electronic devices.
M95M04-DRMN6TP
M95M04-DRMN6TP by STMicroelectronics is a 512KX8 EEPROM with 10 MHz clock frequency, SPI serial bus type, and 1200000 write/erase cycles. It is used in industrial applications for data storage due to its small outline package and low standby current of 0.000002 Amp.
M95256-DRDW3TP/K
STMicroelectronics M95256-DRDW3TP/K is an AEC-Q100 EEPROM with 32KX8 organization, SPI serial bus type, and 4000000 write/erase cycles. It operates at -40 to 125 °C, suitable for automotive applications requiring reliable data storage in a compact form factor.
XCF32PVOG48C
Xilinx
Xilinx XCF32PVOG48C is a 32MX1 EEPROM with 33554432-bit memory density. Operating at 1.8V, it offers 20000 write/erase cycles and supports industrial temperature grade applications. With a small outline package style, it features synchronous operation and GULL WING terminal form for serial configuration memory needs.
AT24MAC402-SSHM-T
AT24MAC402-SSHM-T by Microchip is an EEPROM with 256x8 organization, I2C control byte 1010DDDR, and 1MHz clock frequency. It is used for industrial applications requiring 1000000 write/erase cycles, featuring a small outline package and dual terminal position.
24LC01B-I/P
24LC01B-I/P by Microchip Technology is an EEPROM with 128x8 organization, operating at 5V. It features I2C control byte 1010XXXR and offers write protection. With a max clock frequency of 0.4 MHz, it is ideal for industrial applications requiring reliable non-volatile memory storage.
AT24C16D-STUM-T
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 5; Package Code: VSSOP; Package Shape: RECTANGULAR; Minimum Data Retention Time: 100;
24FC512-I/SN
The Microchip Technology 24FC512-I/SN is a serial EEPROM with 64KX8 organization, operating at up to 1 MHz. It features I2C control byte, hardware write protection, and endurance of 1000000 cycles. Ideal for industrial applications requiring reliable non-volatile memory storage in compact designs.
XCF02SVO20C
Xilinx XCF02SVO20C is a 2MX1 EEPROM with 2097152-bit memory density. Operating at 3.3V, it offers 20000 write/erase cycles and supports industrial temperature grade applications. With a small outline package style, it is ideal for configuration memory in devices requiring low standby current and high endurance.
DS28E07P+T
Analog Devices
DS28E07P+T by Analog Devices is a 1Kx1 EEPROM with 1024-bit memory density. It operates in industrial temperature grade, supports serial bus type 1-WIRE, and offers 10000 write/erase cycles. Ideal for applications requiring small outline package style and asynchronous operation mode.
CAT24C512WI-GT3
CAT24C512WI-GT3 by Onsemi is an EEPROM with 64KX8 organization, operating at 5V. It offers 1000000 Write/Erase cycles endurance and operates on I2C serial bus. Ideal for industrial applications requiring reliable non-volatile memory storage in a small outline package.
M24C04-WMN6P
M24C04-WMN6P by STMicroelectronics is a 4096-bit EEPROM with 512x8 organization, operating at 5V. It features I2C control byte 1010DDMR and offers 1000000 write/erase cycles. Ideal for industrial applications requiring reliable non-volatile memory storage in a small outline package.
AT28C64B-15SU
AT28C64B-15SU by Microchip Technology is an EEPROM with 8KX8 organization, 64-word page size, and 100000 write/erase cycles endurance. It operates at a voltage of 5V and has a max access time of 150ns. Ideal for industrial applications requiring non-volatile memory storage in compact electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EPC16QI100N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 100; Package Code: QFP; Package Shape: RECTANGULAR; Package Style (Meter): FLATPACK;
EPC16QC100
CONFIGURATION MEMORY; Temperature Grade: COMMERCIAL; No. of Terminals: 100; Package Code: QFP; Package Shape: RECTANGULAR; Maximum Seated Height: 2.15 mm;
EPC1064TC32
CONFIGURATION MEMORY; Temperature Grade: COMMERCIAL; No. of Terminals: 32; Package Code: LQFP; Package Shape: SQUARE; Terminal Pitch: .8 mm;
EPC16QC100N
CONFIGURATION MEMORY; Temperature Grade: COMMERCIAL; No. of Terminals: 100; Package Code: QFP; Package Shape: RECTANGULAR; Maximum Standby Current: .00015 Amp;
EPC1064VLC
CONFIGURATION MEMORY; Temperature Grade: COMMERCIAL; No. of Terminals: 20; Package Code: QCCJ; Package Shape: SQUARE; Technology: CMOS;
EPC1064VLCI20
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 20; Package Code: QCCJ; Package Shape: SQUARE; Minimum Supply Voltage (Vsup): 3 V;
EPC1064VLI
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 20; Package Code: QCCJ; Package Shape: SQUARE; Output Characteristics: 3-STATE;
EPC1064LC20
CONFIGURATION MEMORY; Temperature Grade: COMMERCIAL; No. of Terminals: 20; Package Code: QCCJ; Package Shape: SQUARE; Terminal Finish: Tin/Lead (Sn/Pb);
EPC1064LI20
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 20; Package Code: QCCJ; Package Shape: SQUARE; Maximum Supply Voltage (Vsup): 5.5 V;
EPC1064PM
CONFIGURATION MEMORY; Temperature Grade: MILITARY; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Operating Mode: SYNCHRONOUS;
EPC1064TM
CONFIGURATION MEMORY; Temperature Grade: MILITARY; No. of Terminals: 32; Package Code: LQFP; Package Shape: SQUARE; JESD-30 Code: S-PQFP-G32;
EPC1064PC8
CONFIGURATION MEMORY; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Maximum Seated Height: 4.318 mm;
EPC1064VLC20
CONFIGURATION MEMORY; Temperature Grade: COMMERCIAL; No. of Terminals: 20; Package Code: QCCJ; Package Shape: SQUARE; JESD-609 Code: e0;
EPC1064LI
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 20; Package Code: QCCJ; Package Shape: SQUARE; Package Style (Meter): CHIP CARRIER;
EPC1064LM
CONFIGURATION MEMORY; Temperature Grade: MILITARY; No. of Terminals: 20; Package Code: QCCJ; Package Shape: SQUARE; Maximum Supply Voltage (Vsup): 5.25 V;
EPC1064TC
CONFIGURATION MEMORY; Temperature Grade: COMMERCIAL; No. of Terminals: 32; Package Code: LQFP; Package Shape: SQUARE; Package Body Material: PLASTIC/EPOXY;
EPC1064TI
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 32; Package Code: LQFP; Package Shape: SQUARE; Organization: 64KX1;
EPC1064PI8
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
EPC1064LC
CONFIGURATION MEMORY; Temperature Grade: COMMERCIAL; No. of Terminals: 20; Package Code: QCCJ; Package Shape: SQUARE; No. of Functions: 1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved