Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
THERMAL MAGNETIC; Mounting Feature: DIN RAIL; Rated AC Voltage: 240 V; Rated Current: 50 A; Terminal Shape: SNAP ON; No. of Poles: 2;
Median Price
$47.200
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
Hawk Electronics
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Perfect Parts
Circuit Breaker 2DU50L attributes and parameters. Explore more Circuit Breaker devices from Altech
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Body Height:
Body Length/Diameter:
Body Width:
Actuator Type:
Circuit Function:
No. of Poles:
Circuit Protection Type:
Minimum Operating Temperature:
Maximum Operating Temperature:
Environmental Characteristics:
Reference Standard:
Terminal Shape:
Mounting Feature:
Packing Method:
Altech Corporation is a Supplier and Distributor of Electronic and Control Components. Our product line includes Terminal Blocks, Fuses, Circuit Breakers, Disconnect Switches, Inductive Proximity Sensors, Industrial Enclosures, DIN Enclosures, Interface Modules, Foot Switches, Liquid Tight Strain Reliefs, Safety Relays, European Fuses, PIN & Sleeve Devices, Power Supplies and Wire Ducts.
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
LM555CN
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
Harris Semiconductor
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
2N2222A
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
STMicroelectronics
BAV99
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
Surge Components
1N4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
LM358DT
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
PCG-BA-24-616-1DA-E12
Carling Technologies
Carling Technologies' PCG-BA-24-616-1DA-E12 is a 240V, 16A circuit breaker with a rated breaking capacity of 3000A. Featuring a panel mount and handle actuator, it is ideal for equipment leakage protection in various applications. Compliant with CSA and UL standards, it operates b/w -35°C to 66°C temperatures efficiently.
FAZ-D1.5/1-NA-SP
Eaton Corporation
Eaton Corporation's FAZ-D1.5/1-NA-SP is a 1.5A thermal magnetic circuit breaker with 277V AC voltage rating and 10000A breaking capacity. Featuring SNAP ON terminals, TOGGLE actuator, and DIN RAIL MOUNT, it is ideal for manual on/off circuit protection applications.
PKZM0-1
Eaton Corporation's PKZM0-1 is a 1A circuit breaker with 690V AC voltage rating. It features corrosion-resistant body, manual on/off actuator, and short blow characteristic. Ideal for panel mounting applications in environments with temperatures ranging from -25°C to 55°C.
0712233
Phoenix Contact
THERMAL CIRCUIT BREAKER; Manufacturer Series: 0712233;
FAZ-C5/1-NA-DC-SP
Eaton Corporation's FAZ-C5/1-NA-DC-SP is a 5A thermal magnetic circuit breaker with 10000A breaking capacity. It operates at -25 to 75°C, rated for 125V DC voltage, and features DIN rail mounting. Ideal for protecting circuits in industrial applications per CSA and UL standards.
MS3320-20
Crouzet
THERMAL CIRCUIT BREAKER; Mounting Feature: PANEL MOUNT; Rated AC Voltage: 120 V; Rated DC Voltage: 28 V; Rated Current: 20 A; Terminal Shape: SCREW;
3RV2311-1HC10
Siemens
Siemens 3RV2311-1HC10 is a 690V, 8A circuit breaker with IP20 protection. Featuring a rated breaking capacity of 4000A, it has a rotary handle actuator and DIN-rail mounting for industrial applications. With dimensions of 97mm x 45mm x 97mm, it ensures reliable circuit protection in various environments.
CA2-B0-21-620-622-DG
CA2-B0-21-620-622-DG by Carling Technologies is a 20A magnetic circuit breaker with a rated AC voltage of 120V. It has a corrosion/moisture resistant body and can operate in temperatures ranging from -40 to 85 °C. This panel mount breaker is commonly used for series trip circuit protection in various applications.
EA1-B0-14-670-22B-BC
Carling Technologies EA1-B0-14-670-22B-BC is a 70A magnetic circuit breaker with 5000A breaking capacity. It features corrosion/moisture resistance, stud terminals, and operates b/w -40 to 85°C. Ideal for panel mounting in applications requiring reliable series trip protection at 125V DC.
CT1-B2-12-610-121-MG
Carling Technologies CT1-B2-12-610-121-MG is a 10A magnetic circuit breaker with 10000A rated breaking capacity. It features corrosion/moisture resistance, stud terminal shape, and panel mount for series trip applications. Operating temperature ranges from -40°C to 85°C, suitable for various industries per CSA and UL standards.
1135752
THERMAL CIRCUIT BREAKER;
2D4UM
Altech
The Altech 2D4UM is a 4A thermal magnetic circuit breaker with a rated AC voltage of 277V. Featuring an IP20 environmental rating, it has a breaking capacity of 10000A and operates within -25 to 55 °C. Ideal for DIN-rail mounting, its under voltage release function makes it suitable for various industrial applications.
CLB-103-27E3N-W-F
Carling Technologies' CLB-103-27E3N-W-F is a 10A thermal circuit breaker with 250V AC and 32V DC ratings. Featuring fire-resistant properties, it has a push-to-reset actuator and panel mount for series trip applications. Compliant with CE, TUV, and UL standards, it operates b/w -10°C to 60°C temperatures efficiently.
W28XQ1A15
TE Connectivity
TE Connectivity's W28XQ1A15 is a 15A thermal circuit breaker with 250V AC and 32V DC ratings. It features a quick connect terminal shape, push-to-reset actuator, and panel mount for series trip applications with a 2.2s trip delay.
QOU225
Schneider Electric Sa
The Schneider Electric Sa QOU225 is a 25A thermal circuit breaker with 240V AC and 48V DC ratings. Measuring 102.87mm x 38.1mm x 74.93mm, it features a rated breaking capacity of 10000A and is suitable for panel mount applications per CSA, IEC, and UL standards.
SU202M-Z16
Abb
THERMAL MAGNETIC;
3RV1011-0GA10
Siemens 3RV1011-0GA10 is a 690V circuit breaker with thermal magnetic protection and 100kA breaking capacity. It has SNAP ON terminals, DIN-RAIL MOUNT feature, and ATEX/CE/UL certifications. Ideal for industrial applications requiring reliable overcurrent protection in compact spaces.
420362
Legrand
Legrand 420362 is a 40A thermal circuit breaker with 400V AC voltage rating. It has a rated breaking capacity of 50kA and operates b/w -25°C to 70°C. Ideal for DIN-rail mounting, it features a snap-on terminal shape and trip circuit function.
MG24519
Schneider Electric Sa's MG24519 is a 4A thermal magnetic circuit breaker with a rated AC voltage of 277V. Featuring IP20/IP40 environmental characteristics, it has a rated breaking capacity of 5000A and operates b/w -30°C to 70°C. Ideal for DIN-rail mounting, this toggle actuator breaker is suitable for various applications requiring reliable circuit protection.
W28-XQ1A-5
TE Connectivity's W28-XQ1A-5 is a 5A thermal circuit breaker with 250V AC and 32V DC ratings. Featuring a quick connect terminal shape, it has a trip time of 2.2s and rated breaking capacity of 1000A. Ideal for panel mount applications in series trip circuits, conforming to CSA, UL, and VDE standards.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved