Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SLIDE SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: DPDT; Type (Actuator): SLIDE; Length (Actuator): .079 inch; Terminal Length: .118 inch;
Median Price
$2.785
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$2.110
100+ parts
$1.590
1k+ parts
$0.880
10k+ parts
$0.746
Chip1Stop
$2.760
$2.100
$2.010
$1.890
Farnell
$2.810
$1.090
-
Newark
$2.870
$2.280
Element14
$3.890
$3.000
Verical
$0.818
$0.441
$0.424
TME
$1.870
$1.230
$0.800
NAC Semi
$0.433
$0.400
ACDS - Activité Composants Distribution Service
Global Solutions Electronics Company
CoreStaff
$1.378
$0.569
$0.522
Continental Prestige Electronics
$2.000
$0.779
Kepictronics
Authorized Procurement Solutions
Perfect Parts
Metaverse IC Inc.
iodParts Technologies Inc.
Abacus Technologies
Slide Switches SSSS223200 attributes and parameters. Explore more Slide Switches devices from Alps Electric
Length (Actuator):
Type (Actuator):
Body Width:
Body Height:
Body Length/Diameter:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Contact Resistance:
Contact Timing:
Maximum DC Contact Voltage:
Electrical Life:
Insulation Resistance:
Mounting Feature:
No. of Positions:
Maximum Operating Temperature:
Minimum Operating Temperature:
PCB Hole Count:
Switch Action:
Switch Function:
Switch Type:
Terminal Length:
Termination Type:
SSSS223200 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.90.50
SB
Alps Electric Co., Ltd. is a Japanese multinational corporation, headquartered in Tokyo, Japan, producing electronic devices, including switches, potentiometers, sensors, encoders and touchpads.
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
MBRS3200T3G
Onsemi
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
1N4148
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
BAV99
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NC7WZ07P6X
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358ADR
Texas Instruments
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDLL4148
2N2222A
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
500SSP-3S1M6QEA
E-switch
The E-switch 500SSP-3S1M6QEA is a slide switch with stainless steel housing and copper alloy terminals. It has an insulation resistance of 1000000000 ohm, SPDT switch function, and silver plating on end contacts. This switch is ideal for applications requiring a max AC contact current of 2A@250VAC, such as in electronic devices or industrial equipment.
SSA-22
Abb Installation Products
SSA-22 by Abb Installation Products is a DPDT slide switch with 10000 cycles electrical life. It has a body width of 5.5" and sealing with epoxy terminal sealant. Ideal for applications requiring a latched switch function, it operates b/w -20°C to 70°C temperature range.
S202031SS03Q
C & K Components
SLIDE SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): HIGH TYPE; Material (Actuator): NYLON; End Contact Plating: SILVER;
1825261-2
Tyco Electronics Alcoswitch
SLIDE SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): TOP TYPE; Maximum Operating Force: 8.83 N; DC Maximum Rating R Load (Contact): .02A@20VDC;
JS102011SCQN
JS102011SCQN by C & K Components is a black slide switch with nylon housing and brass terminals. It has SPDT function, 5000 cycles electrical life, and 100M ohm insulation resistance. Ideal for applications requiring a latched slide switch with 0.3A@6VDC max rating in tape and reel packaging.
1101M2S3V3BE2
SLIDE SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): HIGH TYPE; Solderability: MIL-STD; Body Width: 7.92 inch;
OS102011MA1QS1
SLIDE SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): SLIDE; Contact Function: ON-ON; Dielectric Withstand Volts (V): 500VAC;
500SSP1S1M1QEA
The E-switch 500SSP1S1M1QEA is a SPDT slide switch with stainless steel housing. It has an electrical life of 30,000 cycles and insulation resistance of 1G ohm. Ideal for applications requiring a durable slide switch with silver contacts, such as panel-mounted controls in industrial equipment.
MS12ANW03
Nkk Switches
MS12ANW03 by Nkk Switches is a slide switch with a stainless steel housing and copper alloy terminals. It has an electrical life of 25000 cycles and insulation resistance of 1000000000 ohm. This switch is commonly used in applications requiring ON-ON contact function, such as electronic devices or industrial equipment.
STS1300PC
TE Connectivity
TE Connectivity's STS1300PC is a SP3T slide switch with 10000 cycles electrical life. It has a body width of 6.1in and sealing with EPOXY TERMINAL SEALED for usage in various applications requiring a max operating temperature of 60°C, 0.3A AC contact current, and -15°C min operating temperature.
SS12SDP2
SS12SDP2 slide switch by Nkk Switches features a POLYACETAL housing, BRASS terminals, and SILVER end contact plating. With SPDT switch function and 10000 cycle electrical life, it is ideal for applications requiring ON-ON contact function at temperatures ranging from -15 to 60 °C. The switch has a max DC contact voltage of 30V and operates with 0.1A current load at 30VDC.
500RDP1S1M2RE
SLIDE SWITCH;
1-1825010-8
TE Connectivity 1-1825010-8 is a Slide Switch with 4PDT switch function, ideal for ON-ON contact function. It has an actuator travel of 2.794mm and electrical life of 15000 cycles. Suitable for panel mounting applications with max AC contact voltage of 115V and DC contact current of 0.3A.
MSSA22G
Apem Components
MSSA22G by Apem Components is a DPDT slide switch with gold plating, 10000 cycles electrical life, and 0.4VA@20VDC power rating. It is used in applications requiring a sealed thermoplastic housing, such as consumer electronics and industrial control systems.
1825199-1
TE Connectivity 1825199-1 is a DP3T slide switch with black actuator. It has an electrical life of 15000 cycles and sealing with epoxy terminal. Ideal for panel mounting applications, it offers ON-ON-ON contact function, 0.3A@125VAC AC max rating, and 0.02A@20VDC DC max rating.
1825087-1
09.03290.01
Eao
SLIDE SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: CHANGE-OVER; Type (Actuator): EXTENDED RAISED TYPE; Additional Features: PANEL MOUNTABLE; Body Height: 5 mm;
CL-SB-22C-01
Nidec Copal Electronics
Nidec Copal Electronics' CL-SB-22C-01 is a slide switch with a housing made of POLYPHENYLENE SULPHIDE and terminals made of COPPER ALLOY. It has an electrical life of 10,000 cycles and insulation resistance of 100MΩ. This switch is commonly used in applications requiring a DPDT switch function.
2-1825010-1
TE Connectivity 2-1825010-1 Slide Switch features 4PDT switch function, with actuator travel of 2.794mm and body width of 7.37 inch. Ideal for applications requiring ON-ON contact function, it has a max operating temperature of 80°C and is suitable for panel mounting with solder termination.
450301014042
Wuerth Elektronik & Kg
450301014042 by Wurth Elektronik is a red slide switch with polyamide housing material. It features SPDT switch function, gold-plated contacts, and operates b/w -40 to 85°C. Ideal for applications requiring a latched slide switch with through-hole mounting and solder termination.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Alps Electric
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved