Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): STEM; Body Length/Diameter: 6 mm; Circuit Config: 1X1;
Median Price
$0.215
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Relay Specialties
1+ parts
$0.200
100+ parts
$0.130
1k+ parts
$0.110
10k+ parts
-
Mouser Electronics
$0.240
$0.199
DigiKey
$0.179
$0.148
Chip1Stop
$0.176
$0.143
$0.127
Verical
$0.160
$0.125
Master Electronics
$0.230
$0.147
TME
$0.220
$0.167
$0.141
$0.129
Pegasus Components GmbH
Chip Stock
Vyrian
NAC Semi
$0.081
ACDS - Activité Composants Distribution Service
IBS Electronics
$0.369
Electro Sonic
$0.109
Nova Conductors
A&K Electronics
Rotakorn
Bristol Electronics
Corohmni
$0.083
CoreStaff
$0.364
$0.194
Abacus Technologies
Glotronic Ltd.
GreenTree Electronics
Kepictronics
Infinite Electronics LLP (Excess)
Authorized Procurement Solutions
Perfect Parts
Continental Prestige Electronics
Computer Components Inc. - USA
Eastek
Argo Parts USA
Bastille Electronics
Keypad Switches SKHHBVA010 attributes and parameters. Explore more Keypad Switches devices from Alps Electric
Color (Actuator):
Type (Actuator):
Body Width:
Body Height:
Body Length/Diameter:
Circuit Config:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Contact Resistance:
Maximum DC Contact Voltage:
Dielectric Withstand Volts (V):
Electrical Life:
Insulation Resistance:
Mounting Feature:
No. of Switches:
Maximum Operating Force:
Maximum Operating Temperature:
Minimum Operating Temperature:
PCB Hole Count:
Packing Method:
Switch Action:
Switch Function:
Switch Type:
Terminal Length:
Termination Type:
SKHHBVA010 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.90.40
SB
Alps Electric Co., Ltd. is a Japanese multinational corporation, headquartered in Tokyo, Japan, producing electronic devices, including switches, potentiometers, sensors, encoders and touchpads.
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
LL4148
Weitron Technology
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
Protek Devices
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
MICRODIODE ELECTRONICS SHENZHEN CO LTD
CRG0805F10K
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
LD1117S33CTR
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
LM555CN
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
2N7002
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
Diotec Semiconductor Ag
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
NDT2955
Onsemi
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
EVQP1F05M
Panasonic
The Panasonic EVQP1F05M is a SPST keypad switch with 100000 cycles electrical life. It features a 3.5mm body height, 6.1mm body length, and operates at temperatures from -40 to 85°C. Ideal for applications requiring a momentary switch with a max contact current of 0.05A@12VDC.
KMS231GLFS
C & K Components
KMS231GLFS by C & K Components is a SPST keypad switch with 100000 cycle electrical life and 1VA@32VDC DC max power rating. With sealing of IP40, it's ideal for applications requiring momentary-tactile switch action in environments with temperatures ranging from -40 to 85 °C.
KMR221GLFS
Itt Cannon
KMR221GLFS by ITT Cannon is a 2.8" keypad switch with IP40 sealing, SPST function, and 1ms contact bounce time. Ideal for surface mount applications, it has a max operating force of 2.5N and operates b/w -40°C to 85°C temperature range.
B32-1310
Omron
Omron B32-1310 Keypad Switch features SPST switch function, 70°C max operating temp, -25°C min operating temp. Ideal for through-hole mounting applications with solder termination.
PTS525SK10SMTRLFS
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Contact Function: OFF-(ON); Solderability: REFLOW; Termination Type: SOLDER;
USLPT3737AL5TR
TE Connectivity's USLPT3737AL5TR is a POLYETHYLENE keypad switch with SPST function. It operates b/w -40 to 85 °C, with max AC contact current of 0.05 A. Ideal for panel mount applications, featuring FLUSH TOP TYPE actuator and SILVER plating on center contact.
B3SN-3012P-G
Omron's B3SN-3012P-G keypad switch offers IP67 sealing, 100000 cycles electrical life, and SPST switch function. With a max operating force of 2.35N, it is ideal for surface mount applications requiring momentary-tactile switch action at temperatures ranging from -25°C to 70°C.
DTS-61R-V
Diptronics Manufacturing
DTS-61R-V by Diptronics is a red SPST keypad switch with 100000 cycles electrical life. Featuring 0.25mm actuator travel, it operates b/w -25 to 70°C. Ideal for applications requiring momentary-tactile switch action and through-hole-straight mounting, with a max DC contact voltage of 12V.
MCSLPT4848A1DTR
TE Connectivity's MCSLPT4848A1DTR is a keypad switch with a polyethylene housing material. It has 1 switch, copper alloy terminals, and an electrical life of 1 million cycles. This switch is commonly used in panel mount applications.
JJJHLUG200NOPMRTR
TE Connectivity's JJJHLUG200NOPMRTR is a BROWN SPST Keypad Switch with 0.05A AC/DC contact current. Featuring STAINLESS STEEL end contacts and SILVER plating, it is ideal for PANEL MOUNT applications requiring OFF-(ON) functionality.
1571220-1
TE Connectivity 1571220-1 is a black keypad switch with polyethylene housing, IP67 sealing, and SPST switch function. It has an electrical life of 1M cycles and operates b/w -35 to 85°C. Ideal for panel mounting applications requiring a momentary-tactile switch with 24VDC max rating.
ADTSM31NVT/R
Apem Components
ADTSM31NVT/R by Apem Components is a SPST keypad switch with 50000 cycles electrical life. Featuring brass terminals and silver plating, it operates b/w -25 to 70 °C, making it ideal for surface mount applications requiring a momentary-tactile switch action.
TL3305AF260QG
E-switch
TL3305AF260QG by E-switch is a SPST keypad switch with 200000 cycles electrical life. Featuring 0.2mm actuator travel and 2.45N max operating force, it's ideal for applications requiring momentary-tactile switch action. With a DC contact voltage of 12V and solder termination type, it offers reliable performance in various electronic devices.
1301.932
Schurter Ag
KEYPAD SWITCH;
FSMRA7J
TE Connectivity's FSMRA7J is a SPST keypad switch with 100000 cycles electrical life. It has a body width of 6.29" and a max operating temperature of 85°C. Ideal for applications requiring momentary-tactile switch action in electronics assemblies.
1241.1600.11
Schurter Ag's 1241.1600.11 Keypad Switch offers SPST switch function with 1000000 cycles electrical life. Features include brass terminals, gold over nickel plating, and polyamide insulator material. Ideal for applications requiring momentary-tactile switch action in a compact design with IP40 sealing.
EVQQ2D03W
The Panasonic EVQQ2D03W is a SPST keypad switch with 2000000 cycle electrical life and 100000000 ohm insulation resistance. It operates b/w -40 to 85 °C, with a max DC contact voltage of 15V. Ideal for applications requiring ON-OFF functionality, such as consumer electronics or industrial control systems.
1825955-2
TE Connectivity's 1825955-2 Keypad Switch features SPST switch function, 100000 electrical life cycles, and 0.98N max operating force. Ideal for panel mounting applications with a max DC contact voltage of 24V and temperature range from -35 to 85°C.
D6C90F2LFS
D6C90F2LFS by ITT Cannon is a black keypad switch with SPST function. It has an electrical life of 250,000 cycles and operates at temperatures ranging from -20 to 85°C. Ideal for applications requiring a momentary-tactile switch with a max DC contact voltage of 32V and current rating of 0.1A.
EVQPLHA15
EVQPLHA15 by Panasonic is a keypad switch with a single switch and a long electrical life of 500,000 cycles. It has a compact body width of 4.9mm and is suitable for surface mount applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SKHHBWA010
Alps Alpine
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): STEM; Termination Type: SOLDER; Packing Method: BOX; BULK;
Alps Electric
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): STEM; PCB Hole Count: 4; Insulation Resistance: 100000000 ohm;
SKHHBVA010
Alps Alpine SKHHBVA010 is a black keypad switch with 1000000 cycles electrical life. It has 0.25mm actuator travel and operates b/w -40 to 90°C. Ideal for applications requiring momentary-tactile switch action, such as consumer electronics and industrial control systems.
SKHHLQA010
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): STEM; Switch Action: MOMENTARY-TACTILE; Body Height: 7.1 mm;
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): STEM; Additional Features: TACT SWITCH; Body Width: 6.55 inch;
SKHHAQA010
Alps Alpine SKHHAQA010 is a RED SPST Keypad Switch with 200000 cycles Electrical Life. Featuring 0.25mm Actuator Travel, it operates b/w -40 to 90 °C. Ideal for applications requiring MOMENTARY-TACTILE switch action and THROUGH HOLE-STRAIGHT mounting with 2.55N Max Operating Force.
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): SOFT FEEL TYPE; Switch Action: MOMENTARY-TACTILE; Maximum DC Contact Voltage: 12 V;
SKHHCRA010
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): STEM; Dielectric Withstand Volts (V): 250VAC; Body Width: 6 inch;
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): STEM; Switch Action: MOMENTARY-TACTILE; Contact Resistance: 100 mohm;
SKHHNHA010
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): STEM; Contact Function: ON-OFF; Solderability: HAND;
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): STEM; Electrical Life: 500000 Cycle(s); Maximum DC Contact Voltage: 12 V;
SKHHLMA010
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): STEM; Electrical Life: 1000000 Cycle(s); Maximum DC Contact Current: .05 A;
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): STEM; Maximum Operating Force: .98 N; Maximum Operating Temperature: 85 Cel;
SKHHBSA010
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): STEM; Contact Function: ON-OFF; Color (Actuator): RED;
SKHHBYA010
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): STEM; Body Length/Diameter: 6 mm; Terminal Finish: Silver (Ag) - with Nickel (Ni) barrier;
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): STEM; Insulation Resistance: 100000000 ohm; Maximum DC Contact Voltage: 12 V;
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): STEM; Insulation Resistance: 100000000 ohm; DC Maximum Rating R Load (Contact): 0.05A@12VDC;
SKHHDHA010
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): STEM; Actuator Travel (mm): 0.25; Body Height: 3.5 mm;
SKHHPRA010
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): STEM; Actuator Travel (mm): 0.25; Body Height: 3.6 mm;
SKHHLRA010
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): STEM; Circuit Config: 1X1; DC Maximum Rating R Load (Contact): 0.05A@12VDC;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved