Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Alpha Wire 7013BK001 is a stranded electrical wire with a conductor made of tin-coated copper alloy. It has a rated voltage of 150V and can operate b/w -55°C to 125°C. Ideal for applications requiring flexible cord and fixture wiring in various industries.
Median Price
$740.427
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
VNN
Vyrian
AZTECH Wire
$7.275
Ampacity Inc.
$351.180
Netroflash
$725.619
$703.406
$688.598
Stranded construction provides flexibility and resistance to bending, making this wire suitable for applications where frequent movement is involved.
This wire is designed to safely carry a voltage of up to 150 volts, making it suitable for low voltage applications.
Tin finish on the conductor helps in preventing corrosion, ensuring a longer lifespan of the wire.
Polyethylene insulation provides excellent electrical properties and resistance to moisture, enhancing the overall reliability of the wire.
With a maximum operating temperature of 125°C, this wire can be used in high-temperature environments without compromising performance.
The wire can withstand extremely low temperatures down to -55°C, making it suitable for use in cold environments.
AWG 20 wire offers a good balance between current-carrying capacity and flexibility, making it ideal for a wide range of applications.
With a smaller diameter, this wire is lightweight and easy to handle, making installation convenient.
Standard length of 304.8 mm provides sufficient amount of wire for various projects, reducing the need for splicing.
19X32 stranding provides flexibility and resistance to breakage, ensuring durability and longevity of the wire.
The cross-section area of 0.518 mm2 allows for efficient flow of current, making this wire suitable for carrying electrical loads.
Copper alloy conductor offers high conductivity and excellent electrical properties, ensuring optimal performance of the wire.
Low resistance of 0.031 ohm per meter minimizes energy loss and heat generation, making this wire energy-efficient.
Flexible cord and fixture wire type offers versatility and ease of installation, making it suitable for various applications in both residential and commercial settings.
Electrical Wires & Cables 7013BK001 attributes and parameters. Explore more Electrical Wires & Cables devices from Alpha Wire
Conductor Finish:
Conductor Material:
Connector Accessory Type:
Construction:
Cross Section Area:
Diameter:
Insulator Material:
Length:
No. of Conductors:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Voltage:
Resistance:
Shielding:
Stranding:
Wire Gauge (AWG):
Wire & Cable Name:
Founded in New York City in 1922 as a supplier of wire strengtheners to the millinery industry (women’s hats), Alpha Wire grew to become a valued supplier to the expanding radio industry throughout the 1930s by producing wire and insulators for antennas. In the decades that followed, the business was propelled by the defense industry’s needs for electronics during World War II, and by the advent of television. Enhancements to Alpha’s broad portfolio continued to the end of the 20th century and the beginning of the 21st century. Innovations included the introduction of superior flex capabilities and the development of EcoWire®, the industry’s first smaller, lighter, and zero-halogen hook-up wire. That development was followed by the acquisition of COAST in 2014, which expanded Alpha’s capabilities to include custom cables. From its manufacturing facilities throughout the U.S., and offices and distribution centers in the U.S., UK, China, and Hong Kong, Alpha Wire provides an extensive selection of cable, wire, heat-shrink tubing, accessories, and wire management services to customers worldwide in the Industrial Automation, Medical, Semiconductor, Aerospace & Defense, Consumer Electronics, and Energy markets.
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
STM32H743ZIT6
STMicroelectronics
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
BSS138
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
1N4148
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
EU2B-YS303C
Idec
ROTARY SWITCH;
MC7805CTG
Onsemi
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FDN5618P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS123NH6327XTSA1
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
1N4148WS
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
ULN2803ADW
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
55PC0211-24-9CS2502
TE Connectivity
TE Connectivity's 55PC0211-24-9CS2502 is a 600V rated wire with TIN finish, suitable for temperatures ranging from -65°C to 150°C. Featuring 24 AWG copper alloy conductor and 19X36 stranding, it is ideal for applications requiring flexible cord and fixture wire such as SPEC 55 cables.
31065
Helukabel
WIRE AND CABLE;
M27500-20ML2T08
TE Connectivity's M27500-20ML2T08 is a 600V rated cable with TIN finish, suitable for temperatures ranging from -65°C to 150°C. Featuring a copper alloy conductor and 20 AWG wire gauge, it is ideal for applications requiring MIL-DTL-27500 cables such as flexible cords and fixture wires.
TFSD-20-28C-H-34.00-T-NDS
Samtec
Samtec TFSD-20-28C-H-34.00-T-NDS is a UL approved wire with TIN finish, PVC insulation, and 28 AWG copper alloy conductor. Operating from -10 to 80°C, it has 40 conductors in 0.081 mm2 area for flexible cord and fixture wire applications.
221612
Lapp Group Pvt
221612 by Lapp Group Pvt is a stranded wire with PVC jacket, rated at 600V. Ideal for industrial and automotive plants, tray wiring applications. Features include 16 AWG bare copper conductor, flexible cord type, and operating temperatures from -25 to 90 °C.
M22759/11-26-9
Defense Logistics Agency
M22759/11-26-9 by Defense Logistics Agency is a MIL-approved stranded wire with silver finish, rated for 600V. Constructed with copper conductor, extruded PTFE insulator, and operating temperature up to 200°C. Ideal for flexible cord and fixture wire applications.
M27500-22SB3U00
TE Connectivity's M27500-22SB3U00 is a MIL-approved stranded wire with 600V rating, suitable for military applications. Featuring tin finish, it has a conductor made of copper alloy and operates b/w -65 to 150°C. With 3 conductors and 0.325 mm2 cross-section area, this flexible cord is ideal for harsh environments.
P569-006-MF
Tripp Lite
CABLE ASSEMBLY;
TTL-232R-3V3
FTDI
TTL-232R-3V3 by FTDI is a 24 AWG communication cable with USB to UART connectors. It has UL approval, operates b/w -40°C to 85°C, and features a 5mm diameter. Ideal for connecting devices requiring reliable data transmission in various applications.
M17/176-00002
Tri-star Electronics International
WIRE AND CABLE; Shielding: YES; MIL Conformity: YES; DIN Conformity: NO; No. of Conductors: 1; Insulator Material: PTFE;
9748
Belden
Belden 9748 is a solid construction cable with PVC jacket and shielding, rated for 300V. Featuring polyolefin insulation, it operates b/w -20 to 75°C with bare copper conductor material. Ideal for applications requiring flexible cord and fixture wire with 8 conductors at AWG 24 size.
1200660984
Molex
U.FL-2LP-088K1T-A-(50)
Hirose Electric
U.FL-2LP-088K1T-A-(50) by Hirose Electric is a stranded communication cable with FEP jacket and shielding. It has a conductor made of annealed copper, operates b/w -40 to 90°C, and is suitable for electronic and wireless applications. With a wire gauge of 30 AWG, diameter of 1.37 mm, and stranding of 7X0.102, it features PLUG connectors on both sides.
19034
CAB.011
Taoglas
Taoglas CAB.011 cable features stranded construction with FEP jacket and shielding, rated for 30V. Ideal for applications requiring high temperature resistance up to 105°C, it has a copper conductor finished in silver, UL approval, and connectors IPEX MHFI to SMA(F).
83284009100
Belden 83284009100 is a MIL-approved communication cable with stranded construction, FEP jacket, and TFE insulator. It has a rated voltage of 900V, silver conductor finish, and operates b/w -70°C to 200°C. Ideal for military applications requiring reliable signal transmission over long distances.
34108
WIRE AND CABLE; Rated Voltage: 225 V; Shielding: NO; DIN Conformity: NO; No. of Conductors: 140; Conductor Material: BARE COPPER;
34137
WIRE AND CABLE; Rated Voltage: 225 V; Shielding: NO; Wire Gauge (AWG): 18; Construction: STRANDED; Insulator Material: POLYETHYLENE;
55PC0211-20-9CS2502
TE Connectivity's 55PC0211-20-9CS2502 is a flexible cord with 600V rating, TIN finish, and copper alloy conductor. With -65 to 150 °C operating range, it suits electrical applications needing 20 AWG wire gauge and SPEC 55 cable type.
RF179-72SP2-72RP2-0400
Samtec RF179-72SP2-72RP2-0400 is a communication cable with FLUORINATED ETHYLENE PROPYLENE jacket, SILVER finish, and POLYTETRAFLUOROETHYLENE insulator. It operates b/w -50 to 165 °C, has AWG 28 wire gauge, and supports 3A current. Ideal for MCX PLUG connections in various applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
7013BK005
Alpha Wire
WIRE AND CABLE; Rated Voltage: 150 V; Shielding: NO; Conductor Finish: TIN; No. of Conductors: 1; Cross Section Area: .518 mm2;
7013WH001
WIRE AND CABLE; Rated Voltage: 150 V; Shielding: NO; Wire Gauge (AWG): 20; Cross Section Area: .518 mm2; Stranding: 19X32;
7013WH005
WIRE AND CABLE; Rated Voltage: 150 V; Shielding: NO; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE; Minimum Operating Temperature: -55 Cel; Stranding: 19X32;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved