Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Alpha Wire's 3057VI005 is a CSA/UL approved stranded wire with TIN finish, PVC insulation, and copper alloy conductor. Rated for 300V, it operates b/w -40 to 105°C. Ideal for flexible cords and fixtures due to its 16 AWG gauge, 1.309 mm² area, and 0.014 ohm resistance.
Median Price
$77.940
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Farnell
1+ parts
$18.480
100+ parts
-
1k+ parts
10k+ parts
Element14
$61.580
RS Americas
$68.880
Master Electronics
$70.500
Verical
$97.792
RS (Exports)
$100.030
$86.030
Mouser Electronics
$150.830
$123.740
DigiKey
$161.930
Arrow
$26.416
$25.253
TME
$38.590
Electro Sonic
$80.950
$66.810
$65.420
Nova Conductors
$83.351
IBS Electronics
$209.682
$173.043
VNN
Vyrian
Aztec Data Supply Inc.
$6.730
Ampacity Inc.
$15.710
Semicontronic
$15.317
$15.239
AZTECH Wire
$19.795
Allen Electronics Distributors
$66.300
Continental Prestige Electronics
$81.684
Netroflash
$79.183
$77.516
Argo Parts USA
Having CSA and UL approvals ensures that the product meets safety and quality standards, making it a reliable choice for electrical applications.
Stranded construction provides flexibility and durability, making the wire less prone to breakage during installation and use.
The high rated voltage of 300V allows the wire to handle a wide range of electrical applications safely.
Tin finish on the conductor improves conductivity and corrosion resistance, ensuring reliable performance over time.
The use of PVC as an insulator material provides good insulation properties and protects against environmental factors, enhancing the longevity of the wire.
With a high maximum operating temperature, the wire can withstand high heat environments without degrading, ensuring continued performance.
The low minimum operating temperature allows the wire to be used in cold climates without risk of damage, increasing its versatility.
A thicker wire gauge (16 AWG) allows for higher current-carrying capacity, making the wire suitable for applications requiring more power.
The diameter of the wire indicates its physical size, which can affect its flexibility and suitability for different installation requirements.
The specified length of the wire allows for easy measurement and cutting to fit specific installation needs, reducing waste and cost.
The stranding pattern of 26X30 provides flexibility and strength to the wire, making it ideal for applications where frequent bending is required.
The cross-sectional area of the wire determines its conductivity, with a larger area (1.309 mm2) allowing for efficient flow of electrical current.
Copper alloy conductors offer high conductivity and durability, ensuring consistent performance and longevity of the wire.
The low resistance value (0.014 ohm) of the wire minimizes energy loss and heat generation, contributing to efficient electrical transmission.
The wire's flexible cord and fixture wire type allows for easy installation in various configurations, accommodating diverse electrical setups.
Electrical Wires & Cables 3057VI005 attributes and parameters. Explore more Electrical Wires & Cables devices from Alpha Wire
Approvals (V):
Conductor Finish:
Conductor Material:
Connector Accessory Type:
Construction:
Cross Section Area:
Diameter:
Insulator Material:
Length:
No. of Conductors:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Voltage:
Resistance:
Shielding:
Stranding:
Wire Gauge (AWG):
Wire & Cable Name:
Founded in New York City in 1922 as a supplier of wire strengtheners to the millinery industry (women’s hats), Alpha Wire grew to become a valued supplier to the expanding radio industry throughout the 1930s by producing wire and insulators for antennas. In the decades that followed, the business was propelled by the defense industry’s needs for electronics during World War II, and by the advent of television. Enhancements to Alpha’s broad portfolio continued to the end of the 20th century and the beginning of the 21st century. Innovations included the introduction of superior flex capabilities and the development of EcoWire®, the industry’s first smaller, lighter, and zero-halogen hook-up wire. That development was followed by the acquisition of COAST in 2014, which expanded Alpha’s capabilities to include custom cables. From its manufacturing facilities throughout the U.S., and offices and distribution centers in the U.S., UK, China, and Hong Kong, Alpha Wire provides an extensive selection of cable, wire, heat-shrink tubing, accessories, and wire management services to customers worldwide in the Industrial Automation, Medical, Semiconductor, Aerospace & Defense, Consumer Electronics, and Energy markets.
1N4148
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
2N2222A
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
SBAV99LT1G
Onsemi
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
M24308/2-1F
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
Nte Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LL4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
USBLC6-2SC6
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
EU2B-YS3303C
Idec
ROTARY SWITCH;
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
SS14
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
BAV99WT1G
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
BAV99
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ULN2003ADR
Texas Instruments
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
3365/16300
3m Electronic Products Division
WIRE AND CABLE;
2273120-4
TE Connectivity
TE Connectivity's 2273120-4 is a communication cable with 22 AWG wire gauge, rated for 250V DC and 4A current. It operates b/w -40°C to 80°C, making it suitable for various electrical applications requiring reliable connectivity in harsh environments.
44A0111-24-0
TE Connectivity's 44A0111-24-0 cable is a stranded wire with tin finish, rated at 600V. With a conductor material of copper alloy and max operating temperature of 150°C, it is ideal for general purpose and lightweight applications. Featuring a wire gauge of 24 AWG and diameter of 1.02mm, this flexible cord and fixture wire is suitable for various electrical needs.
40155
Helukabel
115101-22-36.00
Amphenol
CABLE ASSEMBLY;
EH8435-000
EH8435-000 by TE Connectivity is a flexible cord and fixture wire with a rated voltage of 600V. It has a conductor finish of TIN and can operate in temperatures ranging from -65°C to 150°C. This wire, made of copper alloy, is commonly used in electrical applications requiring a max wire size of 18 AWG.
A-MCSP-80010/B
Assmann Wsw Components
A-MCSP-80010/B by Assmann Wsw Components is a 26 AWG stranded cable with PVC jacket, 5.2mm diameter, and 10mm length. It features RJ45 plugs on both ends, 0.13 mm2 cross-section area, and 8 conductors. Ideal for communication, control, and power-limited applications.
CS-DSPMDB25MF-006
25218
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Approvals (V): CE; EAC; No. of Conductors: 1; Diameter: 1.47 mm;
M50-9101042
Harwin Plc
Wires and Cables;
1415898
Phoenix Contact
1-971111-3
TE Connectivity's 1-971111-3 is a flat ribbon cable with 10 conductors, rated at 300V. Featuring tinned copper conductor material and PVC insulation, it operates b/w -20°C to 105°C. Ideal for electrical wiring applications requiring flexibility and durability.
12787
3365/15100
44A0111-22-95
TE Connectivity's 44A0111-22-95 is a 600V rated wire with TIN finish, ideal for applications requiring flexibility. Featuring 22 AWG copper alloy conductor, it operates b/w -65°C to 150°C temperatures. Suitable for SPEC 44 cable types, this wire is commonly used in flexible cord and fixture wire applications.
U3A00057-1M
L-com
U2A00007-36I
P018-010
Tripp Lite
282839-000
TE Connectivity's 282839-000 is a flexible cord and fixture wire with a rated voltage of 600V. It features a tin conductor finish, copper alloy conductor material, and can operate in temperatures ranging from -65°C to 150°C. This wire is commonly used in electrical applications requiring a max wire size of 24 AWG.
DPA00006-2M
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3057/1YL001
Alpha Wire
Alpha Wire 3057/1YL001 is a CSA and UL approved solid wire with 16 AWG copper alloy conductor, rated for 300V. Featuring PVC insulation, it operates b/w -40 to 105°C, ideal for flexible cord and fixture wire applications.
3057BK005
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Diameter: 2.34 mm; Stranding: 26X30; Wire Gauge (AWG): 16;
3057/1OR001
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; MIL Conformity: NO; Stranding: 1X16; Diameter: 2.11 mm;
3057/1RD005
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Resistance: .014 ohm; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE; Maximum Operating Temperature: 105 Cel;
3057GY001
3057GY001 by Alpha Wire is a stranded electrical wire with a rated voltage of 300V. It has a conductor made of copper alloy and an insulator made of PVC. This flexible cord and fixture wire is suitable for applications requiring a temperature range of -40°C to 105°C.
3057YL005
3057YL005 by Alpha Wire is a CSA/UL approved stranded wire with 16 AWG copper alloy conductor, rated for 300V. Featuring PVC insulation, it operates b/w -40 to 105°C. Ideal for flexible cord and fixture wiring applications due to its high-quality construction and temperature range suitability.
3057/1BK005
3057/1BK005 by Alpha Wire is a CSA/UL approved solid wire with 16 AWG copper alloy conductor, rated for 300V. Featuring PVC insulation, it operates b/w -40 to 105°C. Ideal for flexible cords and fixtures due to its construction and temperature range.
3057BK001
3057BK001 by Alpha Wire is a stranded electrical wire with a rated voltage of 300V. It has a conductor made of copper alloy and an insulator made of PVC. This flexible cord and fixture wire is suitable for applications requiring temperatures b/w -40°C to 105°C.
3057/1BL001
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE; IEC Conformity: NO; Approvals (V): CSA; UL;
3057/1BR001
Alpha Wire 3057/1BR001 is a solid wire with tin finish, rated at 300V. Featuring PVC insulation, it operates b/w -40 to 105°C. Ideal for flexible cords and fixtures due to its copper alloy conductor and CSA/UL approvals.
3057/1GR001
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; IEC Conformity: NO; Wire Gauge (AWG): 16; Construction: SOLID;
3057/1GR005
Alpha Wire 3057/1GR005 is a CSA and UL approved electrical wire with solid construction, rated for 300V. Featuring a tin finish copper alloy conductor, PVC insulation, it operates b/w -40 to 105°C. Ideal for flexible cord and fixture wire applications due to its 16 AWG gauge and 1.309 mm² cross-sectional area.
3057/1OR005
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Length: 30.48 mm; Approvals (V): CSA; UL; Wire Gauge (AWG): 16;
3057/1RD001
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; DIN Conformity: NO; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE; Insulator Material: POLYVINYLCHLORIDE;
3057/1SL001
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Minimum Operating Temperature: -40 Cel; Construction: SOLID; Cross Section Area: 1.309 mm2;
3057/1SL005
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE; Cross Section Area: 1.309 mm2; Diameter: 2.11 mm;
3057/1VI001
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Wire Gauge (AWG): 16; Maximum Operating Temperature: 105 Cel; Conductor Material: COPPER ALLOY;
3057/1VI005
3057/1VI005 by Alpha Wire is a solid electrical wire with a rated voltage of 300V. It has a conductor made of copper alloy and an insulator made of PVC. This flexible cord and fixture wire is suitable for applications requiring a temperature range of -40°C to 105°C.
3057/1WH001
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; MIL Conformity: NO; Length: 304.8 mm; Conductor Material: COPPER ALLOY;
3057VI013
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Stranding: 26X30; Diameter: 2.34 mm; Resistance: .014 ohm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved