Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Alpha Wire 3055/1GY001 is a CSA/UL approved solid wire with PVC insulation, rated for 300V. Featuring tinned copper conductor, AWG 18 gauge, and flexible cord type, it operates b/w -40 to 105°C. Ideal for electrical applications requiring durable and reliable wiring solutions.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
VNN
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Nova Conductors
Aztec Data Supply Inc.
$3.148
Ampacity Inc.
$5.500
AZTECH Wire
$11.995
Continental Prestige Electronics
Argo Parts USA
Aranea Global
Having CSA and UL approvals ensures that this product meets recognized safety standards, making it a reliable choice for various applications.
The solid construction of this wire provides durability and ensures reliable performance in different environments.
With a high rated voltage, this wire can handle a wide range of electrical applications safely and efficiently.
The PVC insulator material offers excellent protection against electrical interference and mechanical damage, making this wire suitable for use in various settings.
The high maximum operating temperature allows this wire to withstand heat without compromising performance or safety.
With a low minimum operating temperature, this wire remains flexible and functional even in cold environments.
The 18 AWG wire gauge provides the perfect balance between flexibility and conductivity, making it ideal for a wide range of electrical applications.
The small diameter of this wire allows for easy installation in tight spaces without sacrificing performance.
The generous length of this wire provides flexibility in various applications and ensures you have enough wire for your project.
Tinned copper conductors offer high conductivity and corrosion resistance, ensuring reliable electrical connections.
The low resistance of this wire helps minimize energy loss and ensures efficient transfer of electricity.
This wire type is versatile and can be used for a wide range of applications, providing flexibility and reliability.
Electrical Wires & Cables 3055/1GY001 attributes and parameters. Explore more Electrical Wires & Cables devices from Alpha Wire
Approvals (V):
Conductor Material:
Connector Accessory Type:
Construction:
DIN Conformity:
Diameter:
IEC Conformity:
Insulator Material:
Length:
MIL Conformity:
No. of Conductors:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Voltage:
Resistance:
Shielding:
Wire Gauge (AWG):
Wire & Cable Name:
Founded in New York City in 1922 as a supplier of wire strengtheners to the millinery industry (women’s hats), Alpha Wire grew to become a valued supplier to the expanding radio industry throughout the 1930s by producing wire and insulators for antennas. In the decades that followed, the business was propelled by the defense industry’s needs for electronics during World War II, and by the advent of television. Enhancements to Alpha’s broad portfolio continued to the end of the 20th century and the beginning of the 21st century. Innovations included the introduction of superior flex capabilities and the development of EcoWire®, the industry’s first smaller, lighter, and zero-halogen hook-up wire. That development was followed by the acquisition of COAST in 2014, which expanded Alpha’s capabilities to include custom cables. From its manufacturing facilities throughout the U.S., and offices and distribution centers in the U.S., UK, China, and Hong Kong, Alpha Wire provides an extensive selection of cable, wire, heat-shrink tubing, accessories, and wire management services to customers worldwide in the Industrial Automation, Medical, Semiconductor, Aerospace & Defense, Consumer Electronics, and Energy markets.
1N4148
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
BAV99
STMicroelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Plessey Semiconductors Discrete Components Div
Other Transistors;
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
Surge Components
M24308/2-1F
Itt Cannon
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Filter Feature: NO;
Sangdest Microelectronics (Nanjing)
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
1N4148WT
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Hy Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
1172CSL002
Alpha Wire
1172CSL002 by Alpha Wire is a 300V stranded cable with PVC jacket, ideal for communication and control applications. Featuring tin finish copper alloy conductor, it has CE, CSA, UL approvals. With 22 AWG and operating temp range of -20 to 80 °C, it offers 0.326 mm2 cross section area.
687840003
CABLE ASSEMBLY; Connector Side-1: USB A PLUG; Connector Side-2: MICRO USB B PLUG; Wire Gauge (AWG): 28;
M22759/11-20-0
Carlisle Interconnect Technologies
M22759/11-20-0 by Carlisle IT is a MIL-approved stranded wire with silver finish, PTFE insulation, and copper conductor. It operates b/w -55 to 200°C, has a resistance of 0.0301 ohm, and is ideal for applications requiring smoke emission control and overload stability. This flexible cord & fixture wire has a 600V rating and 19X32 stranding.
VW3M8201R15
Schneider Electric Sa
CABLE ASSEMBLY;
49952
Helukabel
Helukabel 49952 is a CE, CSA, and UL approved stranded cable with PVC jacket and shielding. It has a rated voltage of 300V, suitable for robot systems and moving machines. With DIN and IEC conformity, it operates b/w -40°C to 80°C, featuring 25 bare copper conductors in a 0.34 mm2 cross-section area.
982661014
Molex 982661014 flat cable with UL approval, rated for 60V, features tin finish copper alloy conductor and polyester insulator. Suitable for applications requiring a max operating temperature of 105°C and min of -40°C, this 0.03 mm2 cross-section cable has 31 conductors and is ideal for low current (0.5A) electrical wiring needs.
22759/32-22-0
TE Connectivity
TE Connectivity's 22759/32-22-0 wire is a flexible cord with 22 AWG copper alloy conductor, rated for 600V. With a temperature range of -65 to 150°C, it is suitable for various electrical applications requiring reliable performance in extreme conditions. Compliant with MIL-DTL-22759 standards, it offers high-quality connectivity solutions.
8760060500
Belden
WIRE AND CABLE;
M22759/34-20-9
TE Connectivity's M22759/34-20-9 is a MIL-approved electrical wire with 600V rating, stranded construction, and tin finish. Suitable for applications requiring flexibility and fixture wiring, it has a temperature range of -65 to 150°C and features copper alloy conductor material.
2147501042
55A0111-20-9
TE Connectivity's 55A0111-20-9 wire is a CSA, CAA, MIL, UL approved stranded cable with a rated voltage of 600V. Constructed with tin finish copper alloy conductor, it operates b/w -65 to 150°C. Ideal for flexible cord and fixture wire applications due to its 19X32 stranding and resistance of 0.032 ohm.
31065
RF179-74BJ3-72RP2-0400
Samtec
Samtec RF179-74BJ3-72RP2-0400 is a communication cable with FLUORINATED ETHYLENE PROPYLENE jacket, SILVER finish conductor, and shielded design. It operates b/w -50 to 165 °C, suitable for BNC JACK to MCX PLUG connections in various electrical applications.
44A0111-12-0-MX
TE Connectivity's 44A0111-12-0-MX is a 600V electrical wire with TIN finish, suitable for temperatures ranging from -65 to 150°C. Featuring 12 AWG copper alloy conductor, it is ideal for flexible cord and fixture wire applications.
245106-02-06.00
2118651-6
TE Connectivity's 2118651-6 is a communication cable with FLUORINATED ETHYLENE PROPYLENE jacket, suitable for temperatures ranging from -45 to 85 °C. Featuring UMCC connectors on both sides, this cable has a wire gauge of 32 AWG and a diameter of 1.13 mm, making it ideal for various electrical applications.
233
CABLE ASSEMBLY; Connector Side-1: M12 MALE; Connector Side-2: M12 MALE; Rated Voltage: 60 V; Rated Current: 4 A; Shielding: YES;
PXP6037/3M00
Bulgin
12916
Helukabel 12916 is a CE, CSA, and UL approved CONTROL CABLE with STRANDED construction and PVC jacket. Ideal for PLANT ENGINEERING and MACHINERY MANUFACTURING applications. Features include 300V rating, -40 to 80°C operating temp range, and 0.75mm² cross-section area.
M27500-22ML1T08
TE Connectivity's M27500-22ML1T08 is a MIL-DTL-27500 cable with 600V rating, TIN finish, and copper alloy conductor. It operates b/w -65°C to 150°C, suitable for flexible cord and fixture wire applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3055/1BL005
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE; Maximum Operating Temperature: 105 Cel; Conductor Material: COPPER ALLOY;
3055/1SL001
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Diameter: 1.829 mm; No. of Conductors: 1; Maximum Operating Temperature: 105 Cel;
3055/1WH001
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; DIN Conformity: NO; Stranding: 1X18; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE;
3055BK001
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Cross Section Area: .823 mm2; DIN Conformity: NO; Conductor Finish: TIN;
3055/1BR005
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; IEC Conformity: NO; Conductor Finish: TIN; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE;
3055/1RD001
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Resistance: .022 ohm; Construction: SOLID; MIL Conformity: NO;
3055/1BL001
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Insulator Material: POLYVINYLCHLORIDE; Length: 304.8 mm; IEC Conformity: NO;
3055RD001
3055RD001 by Alpha Wire is a CSA/UL approved stranded wire with 18 AWG copper alloy conductor, rated for 300V. Featuring PVC insulation, it operates b/w -40 to 105°C, ideal for flexible cord and fixture wiring applications.
3055BL001
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Stranding: 16X30; Construction: STRANDED; MIL Conformity: NO;
3055/1SL005
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Insulator Material: POLYVINYLCHLORIDE; Length: 30.48 mm; Maximum Operating Temperature: 105 Cel;
3055BR001
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Length: 304.8 mm; Resistance: .023 ohm; Cross Section Area: .823 mm2;
3055GY001
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; No. of Conductors: 1; DIN Conformity: NO; Length: 304.8 mm;
3055WY001
3055WY001 by Alpha Wire is a CSA/UL approved stranded wire with PVC insulation. Featuring tinned copper conductor, it has a 300V rating and operates b/w -40 to 105°C. Ideal for flexible cord and fixture wire applications.
3055/1YL005
3055/1YL005 by Alpha Wire is a solid electrical wire with a rated voltage of 300V. It has a conductor made of copper alloy and an insulator made of PVC. This flexible cord and fixture wire is suitable for applications requiring a temperature range of -40°C to 105°C.
3055/1GR001
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Diameter: 1.829 mm; Resistance: .022 ohm; Stranding: 1X18;
3055/1OR005
Alpha Wire 3055/1OR005 is a CSA and UL approved solid wire with tin finish. Featuring 18 AWG copper alloy conductor, PVC insulation, it operates b/w -40 to 105°C. Ideal for flexible cord and fixture wiring applications due to its 300V rating and 0.823 mm2 cross-sectional area.
3055BL005
3055BL005 by Alpha Wire is a stranded electrical wire with a rated voltage of 300V. It has a conductor made of copper alloy and an insulator made of PVC. This flexible cord and fixture wire is suitable for applications requiring temperatures b/w -40°C to 105°C.
3055WU001
3055WU001 by Alpha Wire is a stranded electrical wire with PVC insulation. It has a rated voltage of 300V and can operate in temperatures ranging from -40 to 105°C. This flexible cord and fixture wire is commonly used in various applications requiring a single conductor.
3055/1OR001
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Conductor Finish: TIN; Construction: SOLID; Diameter: 1.829 mm;
3055/1GY003
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; DIN Conformity: NO; Insulator Material: PVC; Approvals (V): CSA; UL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved