Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Alpha Wire's 3051/1OR005 is a solid construction electrical wire with a rated voltage of 300V. It features a tin conductor finish and polyvinylchloride insulator material, making it suitable for use as flexible cord and fixture wire in various applications.
Median Price
$40.690
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Farnell
1+ parts
$20.730
100+ parts
$19.490
1k+ parts
-
10k+ parts
RS Americas
$29.990
$26.990
$26.390
Master Electronics
$32.790
$28.810
$28.630
Mouser Electronics
$48.590
DigiKey
$69.860
Element14
$86.690
$53.750
$20.800
Verical
TME
$27.690
Nova Conductors
$32.630
Electro Sonic
$37.090
$29.490
$28.840
IBS Electronics
$91.037
$71.650
$70.576
Vyrian
VNN
Aztec Data Supply Inc.
$7.220
AZTECH Wire
$16.442
Semicontronic
$17.400
$16.965
$16.878
Allen Electronics Distributors
$30.780
Continental Prestige Electronics
$31.977
Netroflash
Argo Parts USA
Perfect Parts
Having CSA and UL approvals ensures that this product meets international safety standards and regulations, giving users peace of mind when using it.
Solid construction provides durability and long-lasting performance, making this product suitable for various applications.
With a high rated voltage of 300V, this wire can handle higher electrical currents, making it suitable for use in a wide range of applications.
The tin finish on the conductor helps prevent corrosion and improves conductivity, ensuring reliable electrical connections.
The PVC insulator material provides excellent insulation properties, protecting the wire and cable from external factors and ensuring safe operation.
With a high maximum operating temperature, this wire can withstand heat and operate efficiently in various environments without compromising performance.
The low minimum operating temperature allows this wire to function effectively in cold conditions, making it versatile for use in different climates.
The 22 AWG wire gauge offers a good balance between flexibility and current-carrying capacity, making this wire suitable for a variety of applications.
The small diameter of this wire makes it easy to handle and install, providing convenience during setup and maintenance.
A standard length of 30.48 mm allows for easy customization and cutting of the wire to fit specific requirements, reducing wastage and costs.
The cross-sectional area of 0.326 mm2 indicates the wire's capacity to carry current efficiently, ensuring optimal performance in electrical circuits.
Copper alloy conductors offer high conductivity and durability, making this wire a reliable choice for electrical connections.
With low resistance of 0.055 ohm, this wire minimizes energy loss and heat generation, enhancing the overall efficiency of the electrical system.
Being a flexible cord and fixture wire, this product is versatile and can be easily bent and twisted to fit various applications, making it a practical choice for different scenarios.
Electrical Wires & Cables 3051/1OR005 attributes and parameters. Explore more Electrical Wires & Cables devices from Alpha Wire
Approvals (V):
Conductor Finish:
Conductor Material:
Connector Accessory Type:
Construction:
Cross Section Area:
DIN Conformity:
Diameter:
IEC Conformity:
Insulator Material:
Length:
MIL Conformity:
No. of Conductors:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Voltage:
Resistance:
Shielding:
Wire Gauge (AWG):
Wire & Cable Name:
Founded in New York City in 1922 as a supplier of wire strengtheners to the millinery industry (women’s hats), Alpha Wire grew to become a valued supplier to the expanding radio industry throughout the 1930s by producing wire and insulators for antennas. In the decades that followed, the business was propelled by the defense industry’s needs for electronics during World War II, and by the advent of television. Enhancements to Alpha’s broad portfolio continued to the end of the 20th century and the beginning of the 21st century. Innovations included the introduction of superior flex capabilities and the development of EcoWire®, the industry’s first smaller, lighter, and zero-halogen hook-up wire. That development was followed by the acquisition of COAST in 2014, which expanded Alpha’s capabilities to include custom cables. From its manufacturing facilities throughout the U.S., and offices and distribution centers in the U.S., UK, China, and Hong Kong, Alpha Wire provides an extensive selection of cable, wire, heat-shrink tubing, accessories, and wire management services to customers worldwide in the Industrial Automation, Medical, Semiconductor, Aerospace & Defense, Consumer Electronics, and Energy markets.
M39029/58-360
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
1552200168
WIRE AND CABLE;
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
DS18B20+
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
1554216002
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
2N2222A
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
LM555CN
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
M27500-24ML2T08
TE Connectivity's M27500-24ML2T08 is a 24 AWG wire with TIN finish, rated for 600V. With copper alloy conductor, it operates b/w -65 to 150°C. Ideal for flexible cord and fixture wire applications like SPEC 44 cables.
C232HM-DDHSL-0
The FTDI C232HM-DDHSL-0 cable is ideal for USB to JTAG interfaces. It features a 3.3V rated voltage, CE/FCC/UL approvals, and operates b/w -40°C to 85°C. With a wire gauge of 24 AWG and USB to female header connectors, it supports up to 0.25A current.
1487597-1
TE Connectivity 1487597-1 is a shielded communication cable with 4 conductors of 22 AWG. It features PLUG connectors on both sides and is ideal for various electrical wiring applications requiring secure connections.
3365/16SF
3m Electronic Products Division
3m Electronic Products Division's 3365/16SF is a UL-approved FLAT FLEXIBLE CABLE with 16 conductors of STRANDED TINNED COPPER. It has a rated voltage of 300V, operating from -20 to 105°C, making it ideal for electrical wiring applications.
CW5505-000
115101-01-M0.75
Amphenol
CABLE ASSEMBLY;
M22759/32-22-9
TE Connectivity's M22759/32-22-9 wire is MIL-approved with 600V rating, ETFE insulator, and copper alloy conductor. Ideal for applications requiring flexibility and durability in a wide temperature range (-65 to 150°C), such as military and aerospace industries.
13254
Helukabel
Helukabel 13254 is a stranded wire with polymer jacket, rated for 600V. With approvals from BS, CUL, DIN, IEC, UL, VDE it's ideal for fixed installations. Featuring bare copper conductor and operating temperatures from -40 to 80°C, it's suitable for various electrical applications.
2149201214
1202
Videk
CABLE ASSEMBLY; Connector Side-1: BNC PLUG; Connector Side-2: BNC PLUG; Shielding: YES; MIL Conformity: NO; IEC Conformity: NO;
VHA00009-2M
L-com
U.FL-2LP-088K1T-A-(150)
Hirose Electric
Hirose Electric U.FL-2LP-088K1T-A-(150) is a stranded FEP cable with silver finish, shielding, and 30 AWG. Ideal for communication applications, it has a diameter of 1.37mm, operates b/w -40 to 90°C, and features U.FL connectors on both ends.
FFSD-10-D-12.00-01-N
Samtec
Samtec's FFSD-10-D-12.00-01-N is a UL-approved stranded flat cable with tin finish, PVC insulation, and 30 AWG wire gauge. Ideal for high reliability applications, it has a max operating temperature of 105°C and min of -40°C. With 20 conductors, each 0.305mm long, this cable features socket connectors on both ends and a cross-section area of 0.0509mm².
TCSD-25-D-06.00-01-N
Samtec's TCSD-25-D-06.00-01-N is a UL-approved stranded cable with 300V rating, TIN finish, and PVC insulation. Ideal for applications requiring a flat cable design, it features 50 conductors of copper alloy with a cross-section area of 0.081mm2. Operating temperatures range from -40 to 105°C.
16066
Helukabel 16066 is a flexible cord with 28 stranded bare copper conductors, PVC jacket, and shielding. Rated for 300V, it has CE, DIN, VDE approvals and operates b/w -40 to 80°C. Suitable for measuring and control circuits due to its 1mm2 cross-section area and AWG18 wire gauge.
415-0043-MM250
Bel Fuse
982661034
Molex 982661034 flat cable with UL approval, rated for 60V, features tin finish copper alloy conductor and polyester insulator. Suitable for applications requiring a temperature range of -40 to 105°C, it has 33 conductors with AWG 32 gauge and 0.03 mm2 cross section area, ideal for low current (0.5A) electrical connections.
C3365/26
C3365/26 by 3M EPD is a UL/CUL approved flat flexible cable with 26 conductors of 28 AWG tinned copper. Featuring PVC insulation, it operates b/w -20°C to 105°C, making it ideal for electrical wiring applications requiring flexibility and durability.
IDSD-20-D-06.00-T-G-D04
Samtec's IDSD-20-D-06.00-T-G-D04 is a UL-approved stranded flat cable with 40 conductors, rated for 425V and 3.4A. Constructed with tin-finished copper alloy conductors and PVC insulation, it operates b/w -20°C to 105°C. Ideal for electrical wiring applications requiring flexibility and high current capacity.
32860
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3051/1OR001
Alpha Wire
Wires and Cables;
3051/1RD005
3051/1VI001
3051/1SL001
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Construction: SOLID; Resistance: .055 ohm; Diameter: 1.45 mm;
3051/1GR005
Alpha Wire's 3051/1GR005 is a CSA and UL approved electrical wire with solid construction, PVC insulation, and tinned copper conductor. Rated for 300V, it operates b/w -40 to 105°C. Ideal for flexible cord and fixture wiring applications.
3051/1WH005
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Resistance: .055 ohm; Conductor Finish: TIN; Insulator Material: POLYVINYLCHLORIDE;
3051/1YL001
3051/1BK005
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Maximum Operating Temperature: 105 Cel; No. of Conductors: 1; Diameter: 1.45 mm;
3051PK005
3051PK005 by Alpha Wire is a CSA/UL approved stranded wire with 300V rating. Featuring PVC insulation, it operates b/w -40 to 105°C. Ideal for flexible cords and fixtures due to tinned copper conductor and 7X30 stranding.
3051/1BL001
3051BK005
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Cross Section Area: .326 mm2; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE; Resistance: .053 ohm;
3051/1YL005
3051YL005
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Diameter: 1.57 mm; Insulator Material: POLYVINYLCHLORIDE; Conductor Finish: TIN;
3051/1BL005
3051/1GR001
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Maximum Operating Temperature: 105 Cel; Approvals (V): CSA; UL; Insulator Material: POLYVINYL CHLORIDE;
3051WY001
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Approvals (V): CE; CSA; IEC; UL; Wire Gauge (AWG): 22; Length: 304.8 mm;
3051/1BK001
3051/1RD001
3051RD005
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Insulator Material: POLYVINYLCHLORIDE; Conductor Material: COPPER ALLOY; Stranding: 7X30;
3051OR005
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Stranding: 7X30; Cross Section Area: .326 mm2; Diameter: 1.57 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved