Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
AO4447A by Alpha & Omega Semiconductor is a P-CHANNEL FET with 30V DS Breakdown Voltage. It features SINGLE configuration with built-in diode and resistor, ideal for SWITCHING applications. With 17A ID and 0.007 ohm RDS(on), it operates in -55 to 150 °C temperature range, making it suitable for various electronic devices.
Median Price
$0.318
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Arrow
1+ parts
$0.223
100+ parts
$0.212
1k+ parts
-
10k+ parts
DigiKey
$1.770
$0.750
$0.539
Chip1Stop
$0.414
Verical
Nova Conductors
$0.460
TME
$0.870
$0.413
$0.390
Vyrian
Chip Stock
ComSIT Distribution GmbH
ComSIT USA
VNN
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
Argo Parts USA
$0.447
Continental Prestige Electronics
$0.451
Netroflash
$0.437
$0.428
Epart123
$3.410
iodParts Technologies Inc.
GreenTree Electronics
Infinite Electronics LLP (Excess)
S.R.D Solutions
Kepictronics
Provides durability and flexibility in design.
Well-suited for applications requiring low power consumption.
Simplifies circuit design and saves space on the PCB.
Ideal for use in switching applications due to its fast response times.
Easy to integrate into surface mount technology manufacturing processes.
Can handle higher voltages, ensuring reliability in operation.
Efficient use of space on the PCB.
Facilitates easy soldering during assembly.
Allows for easy control of the transistor's conductivity.
Provides versatility in circuit connections.
Can handle high power levels without overheating.
Suitable for compact electronic devices.
Offers high performance and efficiency.
Suitable for applications requiring high-temperature operation.
Provides high reliability and performance.
Capable of operating in extreme temperature conditions.
Capable of handling high current levels.
Provides low resistance for efficient power transfer.
Allows for flexible circuit connections.
Small Signal Field Effect Transistors (FET) AO4447A attributes and parameters. Explore more Small Signal Field Effect Transistors (FET) devices from Alpha & Omega Semiconductor
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation Ambient:
Maximum Power Dissipation (Abs):
Surface Mount:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
AO4447A Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.29.00.95
SB
8541.29.00.80
PCN Assembly/Origin - AOYYY 18/Oct/2016
Alpha and Omega Semiconductor is committed to excellence in design, manufacturing, and responsiveness to our customers through the continued development of new technologies, products and innovative solutions. We bring to the market devices designed to benefit our customers by meeting their product specific needs. Our mission is to bring value to our customers, shareholders and employees. We pride ourself in our expertise in all areas of power semiconductor technology and business operations. Our intellectual property and technical knowledge encompasses the latest advancements in the power semiconductor industry. AOS differentiates itself by integrating its Discrete and IC semiconductor process technology, product design, and advanced packaging know-how to develop high performance power management solutions. AOS's portfolio of products targets high-volume applications, including but not limited to portable computers, flat panel TVs, LED lighting, smart phones, battery packs, consumer and industrial motor controls and power supplies for TVs, computers, servers and telecommunications equipment.
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
2N2222A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
1N4148WS
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Synsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
Panjit International
1N4148
Baneasa S A
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FDV304P
Onsemi
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
BAV99LT1G
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
MBRS360T3G
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
BAV99
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MGSF1N02LT1G
MGSF1N02LT1G by Onsemi is a N-CHANNEL FET with 20V DS Breakdown Voltage, 0.75A Drain Current, and 0.09 ohm On Resistance. Ideal for SWITCHING applications in small outline packages with 150°C max temp.
PMV65XP,215
Nexperia
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: .076 ohm; No. of Elements: 1; Moisture Sensitivity Level (MSL): 1;
BSS139H6906XTSA1
Infineon Technologies
BSS139H6906XTSA1 by Infineon is a N-CHANNEL FET with 250V DS Breakdown Voltage, 0.1A ID, and 30Ω RDS(ON). Ideal for DEPLETION MODE operation in applications requiring low feedback capacitance (3.3pF), such as small signal amplification in electronic circuits.
DMG1029SV-7
Diodes Incorporated
DMG1029SV-7 by Diodes Inc. is a Small Signal FET with N/P-channel types, ideal for switching applications. Features include 60V DS breakdown voltage, 0.5A max drain current, and 1W max power dissipation. Utilizes MOSFET tech with 1.7 ohm RDS(on) for efficient operation in enhancement mode at up to 150°C.
FDC604P
FDC604P by Onsemi is a P-CHANNEL small signal FET with a min DS breakdown voltage of 20V. It is used for switching applications and has a max drain current of 5.5A.
SI2308BDS-T1-E3
SI2308BDS-T1-E3 by Vishay Intertechnology is a N-CHANNEL FET for SWITCHING applications. It has a 60V DS Breakdown Voltage, 2.3A Drain Current, and 0.156 ohm On Resistance. With an Operating Temperature range of -55 to 150 °C, it is ideal for small outline surface mount designs requiring high power dissipation.
STN3P6F6
STMicroelectronics
STN3P6F6 by STMicroelectronics is a P-CHANNEL FET with 60V DS breakdown voltage and 3A ID. It's used for switching applications in enhancement mode, featuring 0.16 ohm RDS(on) and built-in diode. The transistor has a GULL WING terminal form, operates in DUAL position, and can withstand peak reflow temp of 260°C.
FDN339AN
Onsemi's FDN339AN is a N-CHANNEL FET with 20V DS Breakdown Voltage, ideal for SWITCHING applications. It features 3A Drain Current, 0.035 ohm On Resistance, and operates in ENHANCEMENT MODE. With GULL WING terminals and PLASTIC/EPOXY body, it's designed for surface mount in small outline packages.
NDS9407
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
FDS6679AZ
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Terminal Position: DUAL; JESD-609 Code: e3;
MMBF170
The Onsemi MMBF170 is a N-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With 0.5A max drain current and 5 ohm on resistance, it offers efficient performance in small outline packages.
FDC2512
The Onsemi FDC2512 is a N-CHANNEL FET with 150V DS breakdown voltage, ideal for switching applications. It features a max drain current of 1.4A and 0.425 ohm drain-source resistance. With a small outline package style and matte tin terminal finish, it operates in enhancement mode up to 150°C, making it suitable for various electronic devices requiring high power dissipation.
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain-Source On Resistance: .035 ohm; Terminal Form: GULL WING;
BSS84
NXP Semiconductors
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .25 W; Maximum Feedback Capacitance (Crss): 12 pF; Maximum Drain Current (ID): .13 A;
BSS138Q-7-F
BSS138Q-7-F by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage and 0.2A max drain current, ideal for switching applications. It operates in enhancement mode, has 3 terminals, and features a built-in diode. With a max power dissipation of 0.3W and operating temperature range from -55 to 150°C, it meets AEC-Q101 standards for automotive use.
IRLML2803TRPBF-1
IRLML2803TRPBF-1 by Infineon is a N-channel FET with 30V DS breakdown voltage and 1.2A max drain current. It is used in enhancement mode applications, featuring a built-in diode and 0.25 ohm RDS(on). Ideal for small outline packages requiring high power dissipation up to 150°C.
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
FDG6301N
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Terminal Position: DUAL; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AO4485
Alpha & Omega Semiconductor
AO4485 by Alpha & Omega Semiconductor is a P-CHANNEL FET with 40V DS Breakdown Voltage. It has a max ID of 10A and 0.015 ohm RDS(ON), suitable for SWITCHING applications. Operating from -55 to 150 °C, it features an ENHANCEMENT MODE and GULL WING terminals in a SMALL OUTLINE package.
AO4407A
AO4407A by Alpha & Omega Semiconductor is a P-CHANNEL FET with 30V DS Breakdown Voltage and 12A Drain Current. Ideal for SWITCHING applications, it features a built-in DIODE, 0.013 ohm On Resistance, and operates in ENHANCEMENT MODE at up to 150°C.
AO4485L
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.7 W; Maximum Drain Current (ID): 10 A; Transistor Application: SWITCHING;
AO4407AL
AO4407AL by Alpha & Omega Semiconductor is a P-CHANNEL FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max ID of 12A, 0.013 ohm RDS(ON), and 295pF Crss. Operating from -55 to 150 °C, this MOSFET has GULL WING terminals in an 8-terminal SMALL OUTLINE package.
AO4407L
AO4407L by Alpha & Omega Semiconductor is a P-CHANNEL FET used for switching applications. It has a min DS breakdown voltage of 30V, max drain current of 12A, and max operating temperature of 150°C.
AO4441
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3.1 W; Maximum Drain Current (ID): 4 A; Operating Mode: ENHANCEMENT MODE;
AO4484
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3.1 W; JESD-30 Code: R-PDSO-G8; Terminal Form: GULL WING;
AO4447AL
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Maximum Drain Current (ID): 17 A; Minimum DS Breakdown Voltage: 30 V; Package Shape: RECTANGULAR;
AO4447AL_104
Small Signal Field-Effect Transistors; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
AO4402
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Position: DUAL; Maximum Feedback Capacitance (Crss): 810 pF; Package Shape: RECTANGULAR;
AO4444L
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 140 pF; Maximum Drain Current (ID): 11 A;
AO4441L
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: .1 ohm; Package Style (Meter): SMALL OUTLINE; Package Body Material: PLASTIC/EPOXY;
AO4443
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Shape: RECTANGULAR; Maximum Feedback Capacitance (Crss): 72 pF; No. of Terminals: 8;
AO4443L
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): 6.5 A; Package Style (Meter): SMALL OUTLINE; Minimum DS Breakdown Voltage: 40 V;
AO4442
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Feedback Capacitance (Crss): 17 pF; Minimum Operating Temperature: -55 Cel; Package Shape: RECTANGULAR;
AO4447L
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Element Material: SILICON; Package Body Material: PLASTIC/EPOXY; Package Style (Meter): SMALL OUTLINE;
AO4449L
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 30 V; Package Shape: RECTANGULAR; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
AO4448L
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): 10 A; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
AO4448
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): 10 A; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
AO4449
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3.1 W; JESD-30 Code: R-PDSO-G8; No. of Terminals: 8;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved