Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
AO3416 by Alpha & Omega Semiconductor is a N-CHANNEL FET with 20V DS breakdown voltage and 6.5A max ID. It's a single transistor with built-in diode for switching applications, featuring 0.022 ohm RDS(on). The PLASTIC/EPOXY package has GULL WING terminals in SMALL OUTLINE style, suitable for surface mount configurations.
Median Price
$0.108
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Arrow
1+ parts
$0.219
100+ parts
$0.107
1k+ parts
$0.077
10k+ parts
DigiKey
-
$0.109
Chip1Stop
$0.066
Verical
Nova Conductors
$0.115
Bristol Electronics
$0.300
$0.150
$0.060
Vyrian
Chip Stock
J2 Sourcing AB
A2Z Electronics, Inc.
ACDS - Activité Composants Distribution Service
ComSIT Distribution GmbH
VNN
Prism Electronics
Rebound Electronics
Elcom Components
Continental Prestige Electronics
$0.113
Argo Parts USA
$0.112
Authorized Procurement Solutions
RC Electronics
Epart123
$0.160
Kepictronics
iodParts Technologies Inc.
Assy Fe
Cyclops Electronics Ltd (Excess)
Provides durability and protection for the transistor, making it suitable for various environments.
N-Channel FETs typically have lower conduction losses, making them efficient for switching applications.
The built-in diode simplifies circuit design and can provide protection against voltage spikes.
Designed specifically for switching applications, ensuring reliable performance.
Easy to integrate into surface mount technology, saving space on circuit boards.
With a minimum breakdown voltage of 20V, this transistor can handle higher voltages in circuits.
Rectangular shape allows for easy placement and alignment on circuit boards.
Gull wing terminals offer strong mechanical support for soldering and connection stability.
Enhancement mode FETs offer high input impedance and are easy to control in circuits.
Simple 3-terminal design for easy integration into circuits.
Small outline package style saves space and allows for dense PCB layouts.
MOSFET technology offers high input impedance and low drive power requirements.
Silicon-based transistors offer high performance and reliability in various applications.
Capable of handling high drain currents, making it suitable for power switching applications.
Low on-resistance results in minimal power loss and efficient switching performance.
Dual terminal position offers flexibility in circuit connections and layouts.
Small Signal Field Effect Transistors (FET) AO3416 attributes and parameters. Explore more Small Signal Field Effect Transistors (FET) devices from Alpha & Omega Semiconductor
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Qualification:
Surface Mount:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
AO3416 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Assembly/Origin - Mult Dev A/T Site 22/Apr/2021
Alpha and Omega Semiconductor is committed to excellence in design, manufacturing, and responsiveness to our customers through the continued development of new technologies, products and innovative solutions. We bring to the market devices designed to benefit our customers by meeting their product specific needs. Our mission is to bring value to our customers, shareholders and employees. We pride ourself in our expertise in all areas of power semiconductor technology and business operations. Our intellectual property and technical knowledge encompasses the latest advancements in the power semiconductor industry. AOS differentiates itself by integrating its Discrete and IC semiconductor process technology, product design, and advanced packaging know-how to develop high performance power management solutions. AOS's portfolio of products targets high-volume applications, including but not limited to portable computers, flat panel TVs, LED lighting, smart phones, battery packs, consumer and industrial motor controls and power supplies for TVs, computers, servers and telecommunications equipment.
1N4148
Synsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ROHM
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
BAV99
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
Continental Device India
Toshiba
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
Diodes Incorporated
Texas Instruments
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
LL4148
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
LM78L05ACMX/NOPB
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS84
Good-ark Electronics
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .25 W; Maximum Drain Current (ID): .13 A; Package Shape: RECTANGULAR;
SI2308BDS-T1-E3
SI2308BDS-T1-E3 by Vishay Intertechnology is a N-CHANNEL FET for SWITCHING applications. It has a 60V DS Breakdown Voltage, 2.3A Drain Current, and 0.156 ohm On Resistance. With an Operating Temperature range of -55 to 150 °C, it is ideal for small outline surface mount designs requiring high power dissipation.
BSS138P
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Element Material: SILICON; Package Shape: RECTANGULAR; JEDEC-95 Code: TO-236AB;
2N7002BKMB,315
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Case Connection: DRAIN; Transistor Application: SWITCHING; JESD-609 Code: e3;
T2N7002BK,LM(T
T2N7002BK,LM(T by Toshiba is a N-CHANNEL FET with 60V DS breakdown voltage and 0.4A ID. Ideal for switching applications, it features a built-in diode and resistor in a small outline package. Operating in enhancement mode, it has 1W power dissipation and 1.75 ohm max on-resistance.
BSS84W-7-F
BSS84W-7-F by Diodes Inc. is a P-channel FET with 50V breakdown voltage and 0.13A drain current, ideal for switching applications. It features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.2W. This MOSFET comes in a small outline package with gull wing terminals, suitable for surface mount assembly at temperatures up to 150°C.
BSS138WH6433XTMA1
Infineon Technologies
Infineon's BSS138WH6433XTMA1 is a N-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With 0.5W max power dissipation and -55 to 150°C operating temperature range, it offers reliable performance in various electronic devices.
SI9926CDY-T1-GE3
Vishay Intertechnology's SI9926CDY-T1-GE3 is a N-channel FET with 2 elements and built-in diode, ideal for switching applications. Features include 20V DS breakdown voltage, 8A max drain current, and 0.018 ohm max drain-source resistance. With a small outline package style and operating up to 150°C, it suits various electronic designs.
2N7002LT3G
2N7002LT3G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
BSS138NE6327
BSS138NE6327 by Infineon is a N-CHANNEL FET with 60V DS breakdown voltage and 0.23A max drain current. Ideal for small outline applications, it operates in enhancement mode with 3.5 ohm RDS(on) and 3.8pF Crss, meeting MIL-STD-883 standards at -55 to 150°C temperature range.
BSS123_R1_00001
Panjit International
Panjit International's BSS123_R1_00001 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A ID, and 6 ohm RDS. Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode, this MOSFET has GULL WING terminals and matte tin finish.
2N7000
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; No. of Elements: 1; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
NUD3124LT1G
NUD3124LT1G by Onsemi is a N-CHANNEL FET with 28V DS Breakdown Voltage, 0.15A ID, and 1.4 ohm RDS(ON). Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation. Features built-in diode and resistor in a small outline package for surface mount assembly.
NDS356AP
NDS356AP by Onsemi is a P-CHANNEL FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 1.1A, 0.2 ohm Drain-Source Resistance, and operates in ENHANCEMENT MODE. This SMALL OUTLINE transistor has a max Power Dissipation of 0.5W and can withstand temperatures from -55 to 150 °C.
NDC7003P
Fairchild Semiconductor
P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .96 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .34 A;
2N7002K
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Operating Mode: ENHANCEMENT MODE; No. of Elements: 1;
DMP1045U-7
DMP1045U-7 by Diodes Inc. is a P-channel FET with 12V DS breakdown voltage, 5.2A max drain current, and 0.031 ohm max on-resistance. Ideal for switching applications in small outline packages, operating at up to 150°C with matte tin finish and gull wing terminals.
SI4435DDY-T1-GE3
Vishay Siliconix
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; No. of Terminals: 8; Maximum Operating Temperature: 150 Cel;
BSS138NL6327
BSS138NL6327 by Infineon is a N-CHANNEL FET with 60V DS breakdown voltage, 0.23A drain current, and 3.5 ohm on-resistance. Ideal for small outline applications requiring a single transistor with built-in diode in enhancement mode operation. Suitable for use in automotive electronics due to AEC-Q101 reference standard compliance.
NDS0605
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; JESD-30 Code: R-PDSO-G3; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AO3401A
Alpha & Omega Semiconductor
AO3401A by Alpha & Omega Semiconductor is a P-CHANNEL FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has 4A ID and 0.05 ohm RDS(on), suitable for various electronic devices.
AO3401AL
AO3401AL by Alpha & Omega Semiconductor is a P-CHANNEL FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 4.3A and RDS(on) of 0.044 ohm, making it suitable for various small outline surface mount designs.
AO3401L
AO3401L by Alpha & Omega Semiconductor is a P-CHANNEL FET with 30V DS Breakdown Voltage and 4.2A ID. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at -55 to 150 °C, featuring 0.05 ohm RDS(on) and 77 pF Crss capacitance.
AO3407A
AO3407A by Alpha & Omega Semiconductor is a P-CHANNEL FET with 30V DS Breakdown Voltage and 4.3A Drain Current. Ideal for SWITCHING applications, it features SINGLE configuration with BUILT-IN DIODE in a SMALL OUTLINE package, operating at up to 150°C.
AO3401
AO3401 by Alpha & Omega Semiconductor is a P-CHANNEL FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and 4A ID, 0.05 ohm RDS(on). This ENHANCEMENT MODE transistor has GULL WING terminals in a SMALL OUTLINE package.
AO3442
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Package Shape: RECTANGULAR; Minimum DS Breakdown Voltage: 100 V;
AO3415
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.4 W; Qualification: Not Qualified; JESD-609 Code: e3;
AO3413
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Qualification: Not Qualified; JESD-30 Code: R-PDSO-G3; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
AO3415L
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; JEDEC-95 Code: TO-236;
AO3419
AO3419 by Alpha & Omega Semiconductor is a P-CHANNEL FET with 20V DS breakdown voltage. It features 0.075 ohm RDS(on) and operates in enhancement mode for switching applications. This small outline transistor has a built-in diode, GULL WING terminals, and uses metal-oxide semiconductor technology.
AO3421L
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3; JESD-30 Code: R-PDSO-G3;
AO3407L
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Form: GULL WING; No. of Terminals: 3; Minimum Operating Temperature: -55 Cel;
AO3413L
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G3;
AO3418L
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 30 V; Transistor Element Material: SILICON; No. of Elements: 1;
AO3419L
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Feedback Capacitance (Crss): 62 pF; Maximum Operating Temperature: 150 Cel;
AO3434A
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): 4 A; Minimum DS Breakdown Voltage: 30 V; Terminal Form: GULL WING;
AO3420L
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Form: GULL WING; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR;
AO3416L
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING; Terminal Position: DUAL;
AO3481
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Position: DUAL; Maximum Drain-Source On Resistance: .05 ohm; Transistor Application: SWITCHING;
AO3452
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum Operating Temperature: -55 Cel; Maximum Feedback Capacitance (Crss): 18 pF; Maximum Drain-Source On Resistance: .052 ohm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved