Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ACS732KLATR-40AB-T by Allegro MicroSystems is a current sensor with 16 terminals, operating from -40 to 125°C. It provides an analog voltage output through open-drain configuration and supports supply voltages ranging from 4.75V to 5.25V. This rectangular surface-mount sensor is ideal for automotive applications due to its AEC-Q100 screening level and plastic/epoxy package material.
Median Price
$2.580
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$3.120
100+ parts
$2.673
1k+ parts
$2.617
10k+ parts
-
DigiKey
$4.030
$3.019
$2.784
Mouser Electronics
$3.020
$2.780
Verical
$2.513
$2.362
Rochester
$2.240
$2.010
$1.890
Arrow
$2.047
Future Electronics
Nova Conductors
$2.983
Chip Stock
TME
$2.730
VNN
Vyrian
ComSIT Distribution GmbH
NAC Semi
$3.760
IBS Electronics
$3.282
Cyclops Electronics Ltd
Bristol Electronics
Ampacity Inc.
$2.220
Semicontronic
$2.164
$2.153
Continental Prestige Electronics
$2.923
Argo Parts USA
Aztec Data Supply Inc.
$3.010
Advanced Electronics
$3.257
$2.964
$2.671
Corohmni
$3.439
Authorized Procurement Solutions
Netroflash
$2.834
$2.774
Robosynatics
Lucentia Tech
The use of plastic/epoxy material makes the sensor durable and resistant to environmental factors, ensuring a long-lasting product.
With a high maximum supply voltage, this sensor can handle higher power applications, providing flexibility in usage.
AEC-Q100 screening level ensures that the sensor meets automotive industry standards for reliability and performance, making it suitable for automotive applications.
The compact body width of 7.5 inch allows for easy integration and installation in tight spaces, making it a versatile choice for various applications.
As a current sensor, this product can accurately measure electrical currents, providing crucial data for monitoring and control purposes in electronic systems.
With 16 terminals, this sensor offers multiple connection points for interfacing with other components, enhancing its versatility and compatibility in circuit design.
The low body height of 2.35 mm allows for a slim profile, ideal for applications where space is limited and a compact design is desired.
The rectangular package shape provides a standardized form factor, making it easier to mount and integrate into existing systems or circuit layouts.
With a low minimum supply voltage, this sensor can operate efficiently even with lower power sources, ensuring reliable performance in various conditions.
The high maximum operating temperature of 125°C allows this sensor to withstand elevated temperatures, making it suitable for industrial and automotive applications.
Analog voltage output provides continuous and proportional voltage signals based on the current measurement, enabling precise monitoring and control of electrical systems.
The low minimum operating temperature of -40°C ensures reliable performance in cold environments, expanding the range of applications where this sensor can be used.
Matte tin terminal finish offers good solderability and corrosion resistance, ensuring secure connections and long-term reliability in various operating conditions.
The open-drain output configuration allows for easy interface with microcontrollers and digital circuits, enabling seamless integration and data processing.
The compact body length/diameter of 10.3 mm further enhances the sensor's space-saving design, making it suitable for compact electronic devices and systems.
Surface mount capability simplifies the installation process and provides a secure mounting option, making it convenient for automated assembly and mass production.
Other Function Sensors & Transducers ACS732KLATR-40AB-T attributes and parameters. Explore more Other Function Sensors & Transducers devices from Allegro MicroSystems
Body Width:
Body Height:
Body Length/Diameter:
Mounting Feature:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output (V):
Output Type:
Package Body Material:
Package Equivalence Code:
Package Shape or Style:
Screening Level:
Sensors or Transducers Type:
Maximum Supply Voltage:
Minimum Supply Voltage:
Terminal Finish:
ACS732KLATR-40AB-T Sensors & Transducers trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - ACS7 Datasheet Chg 15/Jun/2020
PCN Packaging - Tape Change 27/Jan/2023 Mult Devs Packaging 24/Jan/2023
With more than 30 years of experience developing advanced semiconductor technology and application-specific algorithms, Allegro is a global leader in power and sensing solutions for motion control and energy-efficient systems. Through our innovations in e-Mobility, Clean Energy, and Automation, we are helping move the world toward a safer, more sustainable future. Each year we ship over one billion units into these applications to support our 10,000+ customers around the globe, including over 50 automotive OEMs. Our global engineering, manufacturing and support, combined with our agility, make Allegro a trusted partner to both large enterprises and regional market leaders worldwide.
1N4148
ROHM
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Pro-an Electronic
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
SMBJ18CA
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
MBR0520LT1G
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
AT90CAN128-16AUR
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Changzhou Starsea Electronics
Microsemi
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
NXP Semiconductors
MBRS3200T3G
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
SMMBT3904LT1G
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
TMCS1100A3QDR
TMCS1100A3QDR by Texas Instruments is a current sensor with 8 terminals, operating voltage range of 3-5.5V, and outputting analog voltage. It has a compact rectangular package suitable for surface mount applications in temperature ranges from -40 to 125°C.
ACS710KLATR-25CB-T
Allegro MicroSystems
ACS710KLATR-25CB-T by Allegro MicroSystems is a current sensor with 16 terminals. It operates b/w -40°C to 125°C, providing analog voltage output. With a package size of 10.21mm x 7.5in x 2.34mm, it's ideal for surface mount applications in various industries like automotive and industrial automation.
BHI160B
Robert Bosch
BHI160B by Robert Bosch is a 3x3 mm ACCELEROMETER/GYROSCOPE with 24 terminals. It operates b/w -40 to 85°C, outputting digital voltage in the range of 0.3-1.5V. Ideal for surface mount applications requiring precise motion sensing in compact devices.
TARS-HCASS
Honeywell Sensing And Control
TARS-HCASS by Honeywell Sensing And Control is an ACCELEROMETER/GYROSCOPE sensor with a PBT body, 18.5mm height, and 90.1mm diameter. It operates b/w -40°C to 85°C, has a digital output, and supports supply voltages from 9V to 36V. Ideal for applications requiring precise motion sensing in various environments.
TMCS1107A4BQDR
TMCS1107A4BQDR by Texas Instruments is a current sensor with 8 terminals. It operates b/w -40°C to 85°C, producing analog voltage output. With a supply voltage range of 3V to 5.5V, it is ideal for surface mount applications in various industries.
AWM42300V
Honeywell Sensing And Control's AWM42300V is a MASS AIR FLOW SENSOR with 6 terminals, operating voltage range of 8-15 V. It offers analog voltage output, suitable for applications requiring temp range -25 to 85 °C. Ideal for THROUGH HOLE MOUNT installation in various industries.
OPT3001DNPT
OPT3001DNPT by Texas Instruments is an ambient light sensor with a supply voltage range of 1.6V to 3.6V and digital voltage output. It operates in temperatures from -40°C to 85°C, making it suitable for various applications requiring light sensing capabilities in a compact square package. With surface mounting feature, this sensor has 6 terminals and measures 2mm x 0.6mm x 2 inch in dimensions.
HTFS800-P
Lem International Sa
CURRENT SENSOR;
ACS725KMATR-30AU-T
CURRENT SENSOR; Terminal Finish: MATTE TIN;
ACS770KCB-150U-PSF-T
ACS770KCB-150U-PSF-T by Allegro MicroSystems is a current sensor with 5V power supply, AEC-Q100 screening level, and single-ended output circuit. It operates b/w -40°C to 125°C, ideal for automotive applications due to its BICMOS technology and through-hole mounting feature.
TMCS1107A1BQDRQ1
TMCS1107A1BQDRQ1 by Texas Instruments is a current sensor with 8 terminals. It operates b/w -40°C to 125°C, providing analog voltage output. With a supply voltage range of 3V to 5.5V, it is ideal for automotive applications due to AEC-Q100 screening level compliance.
MTCH105T-I/ST
SENSOR CONTROLLERS; Terminal Finish: MATTE TIN;
HO150-NP-0100
HO150-NP-0100 by Lem International Sa is a current sensor with 3.50% accuracy, voltage output range of -2.0-2.0V, and 13 terminals. It operates b/w -40 to 105°C, suitable for applications requiring precise current measurement in a wide temperature range.
ACS725LLCTR-30AU-T
Allegro MicroSystems' ACS725LLCTR-30AU-T is a current sensor with 3V to 3.6V supply voltage range, AEC-Q100 screening level, and analog voltage output. Ideal for automotive applications due to its compact rectangular shape, surface mount feature, and wide operating temperature range from -40°C to 150°C.
AS7343-DLGT
Ams Ag
AS7343-DLGT by Ams Ag is a SPECTRUM SENSOR with 8 terminals, operating voltage range of 1.7V to 1.98V, and digital output. It has a compact rectangular package suitable for surface mount applications in various industries like automotive and consumer electronics.
HMSR15-SMS
HMSR15-SMS by Lem International Sa is a current sensor with voltage output. It operates b/w -40 to 125°C, with supply voltage range of 4.5-5.5V. This rectangular sensor has 10 terminals and is ideal for surface mount applications.
LESR15-NP
LESR15-NP by Lem International Sa is a CURRENT SENSOR with 14 terminals, output voltage range of 0.25-4.75V, and operates b/w -40 to 105 °C. It has a rectangular shape, measures 13.4" in width, and is designed for board mounting applications.
FS2012-1100-NG
Renesas Electronics
FS2012-1100-NG by Renesas Electronics is a MASS AIR FLOW SENSOR with 6 terminals, operating voltage range of 4.75V to 5.25V, and outputting analog voltage in the range of 0-5V. It has a compact rectangular design (7.1" x 28.8mm x 24mm) suitable for through-hole mounting applications in automotive systems for precise airflow measurement at temperatures ranging from 0°C to 85°C.
AT42QT1070-MMHR
AT42QT1070-MMHR by Microchip operates at 1.8-5.5V with a temp range of -40 to 85°C. It is a touch sensor with digital voltage output, featuring 20 terminals and nickel/palladium/gold finish. This square-shaped sensor, measuring 3x3mm, is ideal for surface mount applications in various electronic devices.
LM57BISD-5/NOPB
National Semiconductor
Other Sensors/Transducers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; JESD-609 Code: e3; Maximum Operating Temperature: 150 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ACS712ELCTR-05B-T
ACS712ELCTR-05B-T by Allegro MicroSystems is a current sensor with 8 terminals. It operates b/w -40 to 85°C, providing analog voltage output at 4.5-5.5V supply voltage range. This rectangular surface-mount sensor in plastic package is ideal for various applications requiring precise current measurements.
ACS712ELCTR-20A-T
ACS712ELCTR-20A-T by Allegro MicroSystems is a current sensor with 8 terminals, operating voltage range of 4.5V to 5.5V, and outputting analog voltage. It has a compact rectangular shape ideal for surface mount applications in temperature range from -40°C to 85°C.
ACS712ELCTR-30A-T
ACS712ELCTR-30A-T by Allegro MicroSystems is a current sensor with 4.5V to 5.5V supply voltage range, -40°C to 85°C operating temperature, and analog voltage output. It is a surface mount sensor measuring 3.9" x 4.9mm x 1.47mm, ideal for applications requiring precise current measurements in electronic systems.
ACS71240KEXBLT-030B3
ACS71240KEXBLT-030B3 by Allegro MicroSystems is a current sensor with voltage output. It operates b/w -40 to 125°C, suitable for automotive applications (AEC-Q100). With a supply voltage range of 3-3.6V and surface mounting feature, it offers precise current sensing in compact dimensions.
ACS71240KEXBLT-050U5
ACS71240KEXBLT-050U5 by Allegro MicroSystems is a current sensor with voltage output. It operates b/w -40 to 125°C, suitable for automotive applications (AEC-Q100). With a supply voltage range of 3-3.6V, it features a surface mount package and 12 terminals in a rectangular shape.
ACS71240LLCBTR-010B3
ACS71240LLCBTR-010B3 by Allegro MicroSystems is a current sensor with voltage output. It operates b/w -40 to 150°C, suitable for automotive applications (AEC-Q100). With 3-3.6V supply voltage range and surface mount feature, it offers precise current measurement in a compact package.
ACS713ELCTR-20A-T
ACS713ELCTR-20A-T by Allegro MicroSystems is a current sensor with 8 terminals, operating voltage range of 4.5V to 5.5V, and outputting analog voltage. It has a compact rectangular shape measuring 3.9" x 1.47mm x 4.9mm, suitable for surface mount applications in temperature ranges from -40°C to 85°C. Ideal for precise current measurements in various electronic systems.
ACS71240KEXBLT-010B3-115
ACS71240KEXBLT-010B3-115 by Allegro MicroSystems is a current sensor with voltage output. It operates b/w -40 to 125°C, with supply voltage range of 3-3.6V. Ideal for automotive applications due to AEC-Q100 screening and surface mounting feature.
ACS770LCB-100B-PFF-T
ACS770LCB-100B-PFF-T by Allegro MicroSystems is a current sensor with a max supply voltage of 5.5V and an output type of analog voltage. It is commonly used in automotive applications due to its AEC-Q100 screening level and through-hole mounting feature.
ACS71240LLCBTR-045B5
ACS71240LLCBTR-045B5 by Allegro MicroSystems is a current sensor with voltage output. It operates b/w -40 to 150°C, suitable for automotive applications (AEC-Q100). With 4.5-5.5V supply voltage range, it features 8 terminals and surface mounting feature.
ACS71240LLCBTR-050U5
ACS71240LLCBTR-050U5 by Allegro MicroSystems is a current sensor with voltage output. It operates b/w -40 to 150°C, suitable for automotive applications (AEC-Q100). With 8 terminals and 4.5-5.5V supply range, it's a surface-mount sensor in a plastic/epoxy package.
ACS722LLCTR-05AB-T
ACS71240KEXBLT-010B3
ACS71240KEXBLT-010B3 by Allegro MicroSystems is a current sensor with voltage output. It operates b/w -40 to 125°C, suitable for automotive applications (AEC-Q100). With a supply voltage range of 3-3.6V, it features a surface mount package and measures 3x3x0.75mm in size.
ACS723LLCTR-05AB-T
Allegro MicroSystems' ACS723LLCTR-05AB-T is a current sensor with 8 terminals, operating b/w -40°C to 150°C. It offers analog voltage output, BICMOS technology, and a supply voltage range of 4.5V to 5.5V. Ideal for surface mount applications in various industries requiring precise current monitoring.
ACS71240KEXBLT-030B5
ACS71240KEXBLT-030B5 by Allegro MicroSystems is a current sensor with voltage output. It operates b/w -40 to 125°C, with supply voltage range of 4.5V to 5.5V. This AEC-Q100 compliant sensor is ideal for automotive applications due to its surface mount feature and 12 terminals.
ACS711KEXLT-15AB-T
ACS711KEXLT-15AB-T by Allegro MicroSystems is a current sensor with 12 terminals, operating b/w -40°C to 125°C. It has an analog voltage output, suitable for applications requiring precise current measurements. With a compact square package of 3mm x 3mm x 0.75mm, it is ideal for surface mount installations in various electronic systems.
ACS71240LLCBTR-030B3
ACS71240LLCBTR-030B3 by Allegro MicroSystems is a current sensor with voltage output. It operates b/w -40 to 150°C, suitable for automotive applications (AEC-Q100). With 8 terminals and surface mount feature, it has a supply voltage range of 3V to 3.6V.
ACS723LLCTR-20AB-T
Allegro MicroSystems' ACS723LLCTR-20AB-T is a current sensor with 8 terminals, operating voltage range of 4.5V to 5.5V, and outputting analog voltage. It has a compact rectangular shape (4.9mm x 3.9 inch x 1.75 mm) suitable for surface mount applications in temperature ranges from -40°C to 150°C.
ACS780KLRTR-150U-T
Allegro MicroSystems' ACS780KLRTR-150U-T is a current sensor with 7 terminals, operating from -40°C to 125°C. It provides analog voltage output at a max supply voltage of 5.5V and min of 4.5V. This rectangular surface-mount sensor in plastic/epoxy package is ideal for automotive applications due to AEC-Q100 screening level compliance.
ACS770ECB-200U-PFF-T
Allegro MicroSystems' ACS770ECB-200U-PFF-T is a current sensor with 5V power supply, AEC-Q100 screening, and 85°C max operating temp. Ideal for automotive applications due to its BICMOS technology, through-hole mounting feature, and single-ended output circuit type.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved