Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ACS724LMATR-65AB-T by Allegro MicroSystems is a magnetic field sensor with voltage output. It operates b/w -40 to 150°C, with supply voltage range of 4.5-5.5V and max current of 14mA. Ideal for automotive applications due to AEC-Q100 screening level and Hall effect technology.
Median Price
$3.025
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$4.740
100+ parts
$3.580
1k+ parts
$3.040
10k+ parts
-
DigiKey
$3.574
$3.136
$2.994
Rochester
$2.710
$2.420
$2.280
Verical
$2.850
Arrow
$2.585
Nova Conductors
$3.310
Cyclops Electronics Ltd
Vyrian
VNN
TME
$1.810
Semicontronic
$2.250
$2.194
$2.182
Advanced Electronics
$2.695
Aztec Data Supply Inc.
$3.170
Corohmni
$3.297
Argo Parts USA
Continental Prestige Electronics
$3.244
Netroflash
Ampacity Inc.
$4.890
RC Electronics
Lixinc
Authorized Procurement Solutions
Robosynatics
Lucentia Tech
$463.510
Plastic/Epoxy material provides durability and protection for the sensor, making it suitable for various environments.
Higher maximum supply voltage allows for flexibility in power supply options and compatibility with a wide range of systems.
AEC-Q100 screening level ensures high reliability and quality standards, making it ideal for automotive applications.
Compact size and width allow for easy integration into different electronic devices and systems.
Single-ended output circuit simplifies the interface and signal processing, making it user-friendly.
Hall effect magnetic field sensor provides accurate and reliable measurements, making it suitable for a variety of applications.
Higher number of terminals provide more connectivity options and flexibility in system integration.
Low profile and height allow for easy installation and compact design of the sensor.
Rectangular shape enhances the mechanical compatibility and ease of mounting in different systems.
Lower minimum supply voltage ensures energy efficiency and compatibility with low-power systems.
High operating temperature range allows for reliable performance in harsh environmental conditions.
Wide output voltage range provides precise and accurate output signals for better control and monitoring.
Voltage output type simplifies signal processing and integration with other electronic components.
Low operating temperature range ensures reliable performance in extreme cold conditions.
Matte tin terminal finish provides good solderability and conductivity for reliable electrical connections.
Analog output signal allows for real-time continuous monitoring and control of magnetic field measurements.
Low operating current ensures energy efficiency and minimal power consumption for extended battery life.
BICMOS technology offers high performance, low power consumption, and integration capabilities for advanced sensor functionality.
Compact body length/diameter provides space-saving design and easy integration in various applications.
Solder termination type ensures reliable and secure connection of the sensor to the circuit board.
Surface mounting feature allows for easy and secure attachment to the PCB for streamlined production and assembly processes.
Magnetic Field Sensors ACS724LMATR-65AB-T attributes and parameters. Explore more Magnetic Field Sensors devices from Allegro MicroSystems
Additional Features:
Body Width:
Body Height:
Body Length/Diameter:
JESD-609 Code:
Linearity (%):
Mounting Feature:
No. of Terminals:
Maximum Operating Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output (V):
Output Circuit Type:
Output Range:
Output Type:
Package Body Material:
Package Equivalence Code:
Package Shape or Style:
Screening Level:
Sensors or Transducers Type:
Maximum Supply Voltage:
Minimum Supply Voltage:
Technology:
Terminal Finish:
Termination Type:
PCN Packaging - Tape Change 27/Jan/2023
With more than 30 years of experience developing advanced semiconductor technology and application-specific algorithms, Allegro is a global leader in power and sensing solutions for motion control and energy-efficient systems. Through our innovations in e-Mobility, Clean Energy, and Automation, we are helping move the world toward a safer, more sustainable future. Each year we ship over one billion units into these applications to support our 10,000+ customers around the globe, including over 50 automotive OEMs. Our global engineering, manufacturing and support, combined with our agility, make Allegro a trusted partner to both large enterprises and regional market leaders worldwide.
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
SMBJ18CA
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
BAV99
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
LM358N
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1554216002
Molex
WIRE AND CABLE;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
1N4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
Temic Semiconductors
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
2N2222A
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
1N4148WT
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Panjit International
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
FDV303N
Onsemi
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
TLE4905LHALA1
Infineon Technologies
TLE4905LHALA1 by Infineon is a Hall effect magnetic field sensor with 24V max supply, 6mT hysteresis, and 8mA max operating current. Ideal for applications requiring digital current output in automotive systems, industrial automation, and consumer electronics due to its compact rectangular design and through-hole mounting feature.
SNDH-T4C-G01
Honeywell Sensing And Control
SNDH-T4C-G01 by Honeywell is a Hall effect magnetic field sensor with 4.5-18V supply voltage range, -40 to 150°C operating temperature, and 20A output current. It features a cylindrical shape, open-collector digital output, and flange mount for industrial applications requiring precise magnetic field detection.
SM451R
The Honeywell SM451R is a magnetoresistive magnetic field sensor with a range of 0.2mT to 1.1mT, suitable for applications requiring precise magnetic field detection. It operates b/w -40°C to 85°C, with a supply voltage range of 3V to 24V and max current of 8mA. The rectangular sensor has through-hole mounting and solder termination, measuring 4mm in length and 1.52 inches in width.
A1212LUA-T
Allegro MicroSystems
Allegro MicroSystems' A1212LUA-T is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 22.5mT. Ideal for applications requiring precise non-inverting analog voltage output in temperature ranges from -40 to 150°C, this rectangular sensor has a body width of 1.52 inch and operates on power supplies ranging from 3.8V to 24V.
DRV5011ADDBZR
DRV5011ADDBZR by Texas Instruments is a magnetic field sensor with a supply voltage range of 2.5V to 5.5V and hysteresis of 4mT, suitable for applications requiring current output in the range of -5-20mA. With a compact rectangular package design and operating temperatures from -40°C to 135°C, it is ideal for surface mount installations in various industrial environments.
DRV5032ZEDBZT
DRV5032ZEDBZT by Texas Instruments is a magnetic field sensor with a supply voltage range of 1.65V to 5.5V and hysteresis of 8.5mT, suitable for applications requiring precise magnetic field detection in the temperature range of -40°C to 85°C. It features an output current range of -5-5mA, open-drain output type, and operates in unipolar input mode, making it ideal for surface mount installations where complementary polarity outputs are needed.
SS496A
SS496A by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 1.57" body width, and 2.5 mV/G sensitivity. Ideal for applications requiring precise detection of magnetic fields in the range of -84mT to 84mT, such as automotive sensors and industrial control systems.
LA150-P
Lem International Sa
LA150-P by Lem International Sa is a magnetic field sensor with a max supply voltage of 15.75V and operating temperature range from -40°C to 85°C. Measuring 16" in width, it features a Hall effect transducer type for precise sensing applications in various industries. With a plastic housing and solder termination, this rectangular sensor is ideal for through-hole mounting setups.
TLE4922XANFHALA1
TLE4922XANFHALA1 by Infineon is a magnetic field sensor with 16V max supply voltage, 3mT hysteresis, and 4.5V min supply voltage. It is used for digital current output in applications requiring precise magnetic field detection like automotive systems and industrial automation.
AH180N-WG-7
Diodes Incorporated
AH180N-WG-7 by Diodes Inc. is a magnetic field sensor with 3 terminals, operating voltage range of 2.5V to 5.5V, and hysteresis of 1mT. It is a Hall effect sensor with digital voltage output suitable for applications requiring non-inverting polarity detection in temperature ranges from -40°C to 85°C. Ideal for surface mount installations due to its compact rectangular package design (3mm x 1.6 inch x 1.15 mm).
RR121-1A53-311
Coto Technology
Coto Technology's RR121-1A53-311 is a MAGNETIC FIELD SENSOR with 0.4 mT Hysteresis, 2.7-3.6V Supply Voltage range, and -40 to 125°C Operating Temperature. Ideal for applications requiring precise digital voltage output in a compact rectangular package for surface mount installations.
ACS724LMATR-30AU-T
Allegro MicroSystems' ACS724LMATR-30AU-T is a magnetic field sensor with voltage output range of 0.5-4.5V, suitable for Hall effect applications. It operates b/w -40 to 150°C, with max supply voltage of 5.5V and current of 14mA, making it ideal for automotive AEC-Q100 compliant designs.
AH1388-HK4-7
Magnetic Field Sensors; Terminal Finish: NICKEL PALLADIUM GOLD; JESD-609 Code: e4;
BIM-UNT-AP6X-0.3-PSG3M
Hans Turck & Kg
MAGNETIC FIELD SENSOR,MAGNETORESISTIVE;
TLE49642MXTMA1
Infineon's TLE49642MXTMA1 is a Hall effect magnetic field sensor with 32V max supply voltage, 5.5mT hysteresis, and 0-25mA output range. Ideal for applications requiring precise current output sensing in a compact rectangular package.
BU52054GWZ-E2
ROHM
ROHM's BU52054GWZ-E2 is a magnetic field sensor with 1.65-3.6V supply voltage range, 0.9mT hysteresis, and -40 to 85°C operating temperature. Ideal for applications requiring precise voltage output in response to magnetic fields, such as automotive sensors or industrial automation systems.
A1308LLHLX-05-T
Allegro MicroSystems A1308LLHLX-05-T is a magnetic field sensor with 4.5-5.5V supply voltage range, -40 to 150°C operating temperature, and 0.5mV/G sensitivity. Ideal for applications requiring precise analog voltage output based on Hall effect technology in a compact rectangular package.
EW-403
Asahi Kasei Microdevices
The Asahi Kasei Microdevices EW-403 is a Hall effect magnetic field sensor with a supply voltage range of 2.5V to 5.5V and output voltage of 0.40V. It operates in temperatures from -30°C to 115°C, with a hysteresis of 10mT and max magnetic field range of ±20mT. Ideal for applications requiring precise magnetic field detection in compact spaces.
AH180-PG-A
Diodes Inc.'s AH180-PG-A is a Hall Effect magnetic field sensor with 1.5mT hysteresis, 0.30V analog output range, and 6mT max magnetic field range. Ideal for applications requiring precise magnetic field detection in the -40 to 85°C temperature range.
TLE4941CBAMA1
TLE4941CBAMA1 by Infineon is a magnetic field sensor with a differential output circuit type and 2-wire interface. It operates on 4.5-20V power supplies, has a max output current of 22A, and can detect magnetic fields ranging from -20mT to +20mT. This sensor is commonly used in automotive applications for precise current measurements.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ACS772ECBTV-250B-PFF-T
MAGNETIC FIELD SENSOR,HALL EFFECT;
ACS717KMATR-10B-T
Allegro MicroSystems' ACS717KMATR-10B-T is a magnetic field sensor with 3-3.6V supply, -40 to 125°C temp range, and 7.5mA max current. Ideal for voltage output applications in automotive and industrial sectors due to its Hall effect technology and surface mounting feature.
ACS724LMATR-20AB-T
Allegro MicroSystems' ACS724LMATR-20AB-T is a magnetic field sensor with voltage output range of 0.5-4.5V, suitable for AEC-Q100 applications. It operates b/w -40 to 150°C, with a max supply voltage of 5.5V and current of 14mA, in a compact rectangular package ideal for surface mount installations.
ACS724LMATR-30AB-T
ACS724LMATR-30AB-T by Allegro MicroSystems is a magnetic field sensor with a voltage output range of 0.5-4.5V. It operates in temperatures ranging from -40 to 150°C and has a max supply voltage of 5.5V. This sensor is commonly used in automotive applications due to its AEC-Q100 screening level and surface mount mounting feature.
ACS716KLATR-6BB-T
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -40 Cel;
ACS716KLATR-25CB-T
ACS716KLATR-25CB-T by Allegro MicroSystems is a magnetic field sensor with 3-3.6V supply voltage, 0.75% linearity, and 11mA max current. Ideal for applications requiring Hall effect sensors in a compact rectangular package for surface mounting.
ACS716KLATR-6BB-NL-T
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Additional Features: IT HAS A SENSITIVITY OF 100 MV/A;
ACS70310LKTATN-001B5-C
Allegro MicroSystems' ACS70310LKTATN-001B5-C is a magnetic field sensor with 4.5-5.5V supply voltage range, AEC-Q100 screening level, and 1mV/G sensitivity. Ideal for automotive applications due to its -40 to 150°C operating temperature range and push-pull analog voltage output interface.
ACS718KMATR-10B-T
Allegro MicroSystems' ACS718KMATR-10B-T is a magnetic field sensor with 16 terminals, operating b/w -40 to 125°C. It has an output of analog voltage and operates at a max current of 9mA. Ideal for surface mount applications in various industries requiring precise magnetic field sensing.
ACS716KLATR-12CB-T
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Minimum Supply Voltage: 3 V;
ACS70310LKTATN-010B5-C
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.50-4.50V;
ACS70310LKTATN-2P5B5-C
Allegro MicroSystems' ACS70310LKTATN-2P5B5-C is a magnetic field sensor with 4.5-5.5V supply voltage range, AEC-Q100 screening level, and 0.50-4.50V analog output for automotive applications. Featuring a sensitivity of 2.5 mV/G, operating temperature from -40 to 150°C, and push-pull output type, it is ideal for precise magnetic field measurements in harsh environments.
ACS716KLATR-12CB-NL-T
Allegro MicroSystems' ACS716KLATR-12CB-NL-T is a magnetic field sensor with 0.75% linearity, operating b/w -40 to 125°C. It features a max supply voltage of 3.6V and output type as analog voltage. Ideal for applications requiring precise magnetic field sensing in compact spaces.
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Output Range: 0.5-4.5V;
ACS724LMATR-50AU-T
Allegro MicroSystems' ACS724LMATR-50AU-T is a magnetic field sensor with voltage output range of 0.5-4.5V, ideal for automotive applications due to AEC-Q100 screening and operating temperature range of -40 to 150°C. It features single-ended output circuit type, BICMOS technology, and surface mounting feature.
ACS717KMATR-20B-T
Allegro MicroSystems' ACS717KMATR-20B-T is a magnetic field sensor with voltage output. It operates b/w -40 to 125°C, with a supply voltage range of 3-3.6V. Ideal for surface mount applications in various industries.
ACS716KLATR-25CB-NL-T
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Maximum Operating Temperature: 125 Cel;
ACS70310LKTATN-005B5-C
Allegro MicroSystems' ACS70310LKTATN-005B5-C is a magnetic field sensor with 4.5-5.5V supply voltage range, -40 to 150°C operating temperature, and 0.50-4.50V analog output. Ideal for automotive applications due to AEC-Q100 screening level and 3-WIRE interface for easy integration in through-hole mounting setups.
ACS718KMATR-20B-T
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Termination Type: SOLDER;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved