Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ACS711EEXLT-31AB-T by Allegro MicroSystems is a current sensor with 3mm body width, 12 terminals, and operates b/w -40°C to 85°C. It has analog voltage output and is ideal for surface mount applications in various industries.
Median Price
$4.620
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Component Electronics Inc.
1+ parts
100+ parts
$3.460
1k+ parts
$3.000
10k+ parts
-
Chip Stock
Vyrian
VNN
Nova Conductors
Prism Electronics
SPM Sales
Aztec Data Supply Inc.
$1.530
Corohmni
$3.164
Advanced Electronics
$3.320
$3.154
AZTECH Wire
$15.872
Ampacity Inc.
$18.750
Semicontronic
$43.750
$42.656
$42.438
Lixinc
Metaverse IC Inc.
Argo Parts USA
Authorized Procurement Solutions
Continental Prestige Electronics
Bastille Electronics
Allows for a wide range of power input options, enhancing flexibility in application scenarios.
Offers a compact and space-saving design, ideal for installations with limited space.
Specifically designed for measuring current, ensuring accurate and reliable performance.
Provides ample connection points for various wiring configurations, allowing for versatile usage.
Low profile design enables easy integration into different setups.
Square shape enhances stability and ease of mounting in different orientations.
Supports lower power input requirements, increasing compatibility with different systems.
Capable of operating in high-temperature environments without performance degradation.
Delivers data in analog format, suitable for various analog systems and signal processing.
Designed to withstand extremely low temperatures, ensuring reliable operation in harsh conditions.
Matte tin finish on terminals provides corrosion resistance and facilitates soldering.
Compact body size enhances portability and ease of installation in tight spaces.
Surface mount design allows for quick and secure attachment to circuit boards or surfaces.
Other Function Sensors & Transducers ACS711EEXLT-31AB-T attributes and parameters. Explore more Other Function Sensors & Transducers devices from Allegro MicroSystems
Body Width:
Body Height:
Body Length/Diameter:
Mounting Feature:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Type:
Package Equivalence Code:
Package Shape or Style:
Sensors or Transducers Type:
Maximum Supply Voltage:
Minimum Supply Voltage:
Terminal Finish:
ACS711EEXLT-31AB-T Sensors & Transducers trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - A1128LLTTR/ACS711EEXLT 05/Sep/2017
PCN Packaging - Tape Change 27/Jan/2023
PCN Part Status Change - Mult Devices 19/Jun/2017 NRND 05/Dec/2016
With more than 30 years of experience developing advanced semiconductor technology and application-specific algorithms, Allegro is a global leader in power and sensing solutions for motion control and energy-efficient systems. Through our innovations in e-Mobility, Clean Energy, and Automation, we are helping move the world toward a safer, more sustainable future. Each year we ship over one billion units into these applications to support our 10,000+ customers around the globe, including over 50 automotive OEMs. Our global engineering, manufacturing and support, combined with our agility, make Allegro a trusted partner to both large enterprises and regional market leaders worldwide.
LL4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
SMBJ18CA
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
LM2931AZ-5.0RPG
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
BSS138W-7-F
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
ULN2003ADR
Texas Instruments
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
BSS123LT1G
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
MC7805CTG
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
MBRS3200T3G
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ACS723KMATR-40AB-T
Allegro MicroSystems
Allegro MicroSystems' ACS723KMATR-40AB-T is a current sensor with 2% accuracy, outputting analog voltage in the range of 0.5-4.5V. Operating b/w -40 to 125°C, it has a supply voltage range of 4.5-5.5V and comes in a rectangular surface-mount package suitable for various applications requiring precise current measurements.
ACS712ELCTR-20A-T
ACS712ELCTR-20A-T by Allegro MicroSystems is a current sensor with 8 terminals, operating voltage range of 4.5V to 5.5V, and outputting analog voltage. It has a compact rectangular shape ideal for surface mount applications in temperature range from -40°C to 85°C.
Q45BB6FQ5
Hans Turck & Kg
Q45BB6FQ5 by Hans Turck & Kg is a fiber optic sensor with a max supply voltage of 30V and a min supply voltage of 10V. It has an output type of NPN, PNP and can operate in temperatures ranging from -40°C to 70°C. This sensor is commonly used in various applications requiring precise optical sensing capabilities.
ACS772KCB-150B-SMT-T
Allegro MicroSystems' ACS772KCB-150B-SMT-T is a current sensor with 4.5V to 5.5V supply voltage range, AEC-Q100 screening level, and -40°C to 125°C operating temperature. It features a rectangular package style, surface mounting feature, and analog voltage output type. Ideal for automotive applications due to its high reliability and compact design.
ACS715ELCTR-20A-T
ACS715ELCTR-20A-T by Allegro MicroSystems is a current sensor with 8 terminals, operating b/w -40°C to 85°C. It provides analog voltage output at a max supply voltage of 5.5V and min of 4.5V. This rectangular package sensor, made of plastic, is ideal for surface mount applications in various electronic systems.
AT42QT1244-MU
AT42QT1244-MU by Microchip Technology is a capacitive touch sensor with 32 terminals, operating b/w -40°C to 105°C. It has a supply voltage range of 3-5V and outputs digital voltage in the range of 0.60-2.30V. Ideal for surface mount applications requiring precise touch sensing capabilities in compact spaces.
59085-040
Hamlin Electronics Europe
Other Sensors/Transducers;
CSNF161
Honeywell Sensing And Control
B1N360V-Q20L60-LI2-H1151/S1225
INCLINOMETER;
DVC1000-UI
Lem International Sa
VOLTAGE SENSOR;
ACS780LLRTR-050B-T
Allegro MicroSystems' ACS780LLRTR-050B-T is a current sensor with 7 terminals, operating voltage range of 4.5V to 5.5V, and outputting analog voltage. Ideal for automotive applications due to AEC-Q100 screening, it operates b/w -40°C to 150°C in a surface-mount package measuring 6.4mm x 4.8mm x 1.5mm.
AD590KF
General Electric Solid State
Other Sensors/Transducers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Package Equivalence Code: FLAT,2PIN,.05LS; Package Body Material: CERAMIC; Terminal Finish: Tin/Lead (Sn/Pb);
HMSR20-SMS
HMSR20-SMS by Lem International Sa is a current sensor with voltage output. It operates b/w -40 to 125°C, with supply voltage range of 4.5-5.5V. Measuring 10.32mm in length and 6.1mm in height, it's ideal for surface mount applications in various industries.
SGP40-D-R4
Sensirion Ag
SGP40-D-R4 by Sensirion Ag is a gas sensor with 6 terminals, CMOS technology, and digital output. It operates b/w -10°C to 50°C, with supply voltage range of 1.7V to 3.6V. This square-shaped sensor is ideal for surface mount applications in various industries.
T9602-3-D
Amphenol's T9602-3-D is a humidity sensor with 3.5% accuracy, operating b/w -20°C to 70°C. It has a digital output and requires a supply voltage of 3.135V to 3.465V. Ideal for applications requiring precise humidity measurements in various environments due to its compact cylindrical design and four terminals.
MTCH105-I/ML
SENSOR CONTROLLERS; Terminal Finish: MATTE TIN;
ACS37002LMABTR-066U5
CURRENT SENSOR; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3;
E3Z-T81
Omron
LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE;
LSM6DSO16ISN
Other Sensors/Transducers; null: ANALOG CIRCUIT;
CSNR161
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ACS712ELCTR-05B-T
ACS712ELCTR-05B-T by Allegro MicroSystems is a current sensor with 8 terminals. It operates b/w -40 to 85°C, providing analog voltage output at 4.5-5.5V supply voltage range. This rectangular surface-mount sensor in plastic package is ideal for various applications requiring precise current measurements.
ACS712ELCTR-30A-T
ACS712ELCTR-30A-T by Allegro MicroSystems is a current sensor with 4.5V to 5.5V supply voltage range, -40°C to 85°C operating temperature, and analog voltage output. It is a surface mount sensor measuring 3.9" x 4.9mm x 1.47mm, ideal for applications requiring precise current measurements in electronic systems.
ACS71240KEXBLT-030B3
ACS71240KEXBLT-030B3 by Allegro MicroSystems is a current sensor with voltage output. It operates b/w -40 to 125°C, suitable for automotive applications (AEC-Q100). With a supply voltage range of 3-3.6V and surface mounting feature, it offers precise current sensing in compact dimensions.
ACS71240KEXBLT-050U5
ACS71240KEXBLT-050U5 by Allegro MicroSystems is a current sensor with voltage output. It operates b/w -40 to 125°C, suitable for automotive applications (AEC-Q100). With a supply voltage range of 3-3.6V, it features a surface mount package and 12 terminals in a rectangular shape.
ACS71240LLCBTR-010B3
ACS71240LLCBTR-010B3 by Allegro MicroSystems is a current sensor with voltage output. It operates b/w -40 to 150°C, suitable for automotive applications (AEC-Q100). With 3-3.6V supply voltage range and surface mount feature, it offers precise current measurement in a compact package.
ACS713ELCTR-20A-T
ACS713ELCTR-20A-T by Allegro MicroSystems is a current sensor with 8 terminals, operating voltage range of 4.5V to 5.5V, and outputting analog voltage. It has a compact rectangular shape measuring 3.9" x 1.47mm x 4.9mm, suitable for surface mount applications in temperature ranges from -40°C to 85°C. Ideal for precise current measurements in various electronic systems.
ACS71240KEXBLT-010B3-115
ACS71240KEXBLT-010B3-115 by Allegro MicroSystems is a current sensor with voltage output. It operates b/w -40 to 125°C, with supply voltage range of 3-3.6V. Ideal for automotive applications due to AEC-Q100 screening and surface mounting feature.
ACS770LCB-100B-PFF-T
ACS770LCB-100B-PFF-T by Allegro MicroSystems is a current sensor with a max supply voltage of 5.5V and an output type of analog voltage. It is commonly used in automotive applications due to its AEC-Q100 screening level and through-hole mounting feature.
ACS71240LLCBTR-045B5
ACS71240LLCBTR-045B5 by Allegro MicroSystems is a current sensor with voltage output. It operates b/w -40 to 150°C, suitable for automotive applications (AEC-Q100). With 4.5-5.5V supply voltage range, it features 8 terminals and surface mounting feature.
ACS71240LLCBTR-050U5
ACS71240LLCBTR-050U5 by Allegro MicroSystems is a current sensor with voltage output. It operates b/w -40 to 150°C, suitable for automotive applications (AEC-Q100). With 8 terminals and 4.5-5.5V supply range, it's a surface-mount sensor in a plastic/epoxy package.
ACS722LLCTR-05AB-T
CURRENT SENSOR;
ACS71240KEXBLT-010B3
ACS71240KEXBLT-010B3 by Allegro MicroSystems is a current sensor with voltage output. It operates b/w -40 to 125°C, suitable for automotive applications (AEC-Q100). With a supply voltage range of 3-3.6V, it features a surface mount package and measures 3x3x0.75mm in size.
ACS723LLCTR-05AB-T
Allegro MicroSystems' ACS723LLCTR-05AB-T is a current sensor with 8 terminals, operating b/w -40°C to 150°C. It offers analog voltage output, BICMOS technology, and a supply voltage range of 4.5V to 5.5V. Ideal for surface mount applications in various industries requiring precise current monitoring.
ACS71240KEXBLT-030B5
ACS71240KEXBLT-030B5 by Allegro MicroSystems is a current sensor with voltage output. It operates b/w -40 to 125°C, with supply voltage range of 4.5V to 5.5V. This AEC-Q100 compliant sensor is ideal for automotive applications due to its surface mount feature and 12 terminals.
ACS711KEXLT-15AB-T
ACS711KEXLT-15AB-T by Allegro MicroSystems is a current sensor with 12 terminals, operating b/w -40°C to 125°C. It has an analog voltage output, suitable for applications requiring precise current measurements. With a compact square package of 3mm x 3mm x 0.75mm, it is ideal for surface mount installations in various electronic systems.
ACS71240LLCBTR-030B3
ACS71240LLCBTR-030B3 by Allegro MicroSystems is a current sensor with voltage output. It operates b/w -40 to 150°C, suitable for automotive applications (AEC-Q100). With 8 terminals and surface mount feature, it has a supply voltage range of 3V to 3.6V.
ACS723LLCTR-20AB-T
Allegro MicroSystems' ACS723LLCTR-20AB-T is a current sensor with 8 terminals, operating voltage range of 4.5V to 5.5V, and outputting analog voltage. It has a compact rectangular shape (4.9mm x 3.9 inch x 1.75 mm) suitable for surface mount applications in temperature ranges from -40°C to 150°C.
ACS780KLRTR-150U-T
Allegro MicroSystems' ACS780KLRTR-150U-T is a current sensor with 7 terminals, operating from -40°C to 125°C. It provides analog voltage output at a max supply voltage of 5.5V and min of 4.5V. This rectangular surface-mount sensor in plastic/epoxy package is ideal for automotive applications due to AEC-Q100 screening level compliance.
ACS770ECB-200U-PFF-T
Allegro MicroSystems' ACS770ECB-200U-PFF-T is a current sensor with 5V power supply, AEC-Q100 screening, and 85°C max operating temp. Ideal for automotive applications due to its BICMOS technology, through-hole mounting feature, and single-ended output circuit type.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved