Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 8.0; Lens Type: UNTINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
Median Price
$0.289
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.108
100+ parts
1k+ parts
10k+ parts
-
Mouser Electronics
$0.300
$0.146
$0.109
$0.082
DigiKey
$0.320
$0.152
$0.113
$0.105
EBV Elektronik
RS (Exports)
$0.278
Digiode
$0.103
Nova Conductors
$0.106
Component Electronics Inc.
$0.380
$0.290
$0.250
TEDSS.com
$0.500
$0.340
Vyrian
Martec Srl
NAC Semi
$0.046
TME
$0.058
$0.047
$0.035
ComSIT Distribution GmbH
North Shore Components
Decca Corp
$0.045
Ampacity Inc.
$0.059
Corphita
$0.097
Continental Prestige Electronics
$0.104
Netroflash
$0.101
$0.099
Argo Parts USA
Advanced Electronics
Corohmni
$0.318
Component Stockers USA
$0.400
$0.090
$0.080
$0.060
Aztec Data Supply Inc.
$0.548
Eastek
Metaverse IC Inc.
Infinite Electronics LLP (Excess)
Kepictronics
Perfect Parts
QUARKTWIN TECHNOLOGY LTD
A-Z Elektronik GmbH
Alle Elektronik GmbH
Supply Digital
Glotronic Ltd.
Authorized Procurement Solutions
Visible LEDs HSMY-C191 attributes and parameters. Explore more Visible LEDs devices from Agilent Technologies
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
JESD-609 Code:
Lens Type:
Minimum Luminous Intensity:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Maximum Reverse Voltage:
Shape:
Size:
Sub-Category:
Terminal Finish:
Terminal Pitch:
Viewing Angle:
HSMY-C191 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
PCN Assembly/Origin - HSM/QSM 20/Sep/2016
Agilent supports scientists in 110 countries in cutting-edge life science research; patient diagnostics; and testing required to ensure the safety of water, food and pharmaceuticals. Our advanced instruments, software, consumables, and services enable our customers to produce the most accurate and reliable results as well as optimal scientific, economic, and operational outcomes. We play a role in advancing important research and testing, with our scientists creating some of the world's most leading-edge technology and our field engineers working side by side with customers to help them maximize productivity. We bring these solutions to a variety of markets, from pharma and diagnostics to applied materials and chemicals. Together with our customers, we’re bringing great science to life.
BSS138
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
1N4148
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
STMicroelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
SMBJ18CA
Thinking Electronic Industrial
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
National Semiconductor
Taitron Components
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
ABS07-32.768KHZ-T
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
2N2222A
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
LL4148
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Shandong Yiguang Electronic Joint Stock
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
Unitrode
SML-P11UTT86RH
ROHM
ROHM SML-P11UTT86RH is a 0.6mm SINGLE COLOR LED with 1.8V max forward voltage, ideal for applications requiring red light emission. With a max forward current of 0.02A and operating temperature range from -40 to 85°C, it offers high luminous intensity at 2.05mcd in a compact square shape for surface mount assembly.
HLMP3301
Cml Technologies & Kg
HLMP3301 by Cml Technologies & Kg is a 5mm SINGLE COLOR LED with peak wavelength of 635nm. It has a max forward current of 0.03A and operates b/w -55 to 100°C. Ideal for applications requiring high efficiency red light emission, such as indicator lights in electronic devices.
555-2001F
Dialight
Dialight's 555-2001F is a 2mm single color LED with peak wavelength of 655nm. It has a max forward current of 0.05A and viewing angle of 90°. Ideal for applications requiring red light emission, such as indicator lights in electronic devices.
597-2503-507F
Dialight's 597-2503-507F is a single color LED with water clear lens. It has a size of 1.2mm and max forward current of 0.02A. Ideal for surface mount applications, it offers a viewing angle of 135° and nominal luminous intensity of 25.0 mcd in yellow-green color.
555-3009F
Dialight's 555-3009F is a 2mm single color LED with built-in resistor. It has a peak wavelength of 650nm, forward current of 0.0026A, and operates b/w -55 to 100°C. Ideal for applications requiring red light emission, such as indicator lights or signage.
SML-LXR851SOC-TR
Lumex
SML-LXR851SOC-TR by Lumex is a 2mm single color LED with peak wavelength of 610nm. It has a max forward current of 0.03A and viewing angle of 160°. Ideal for surface mount applications, this LED is commonly used in visible light displays and indicator lights due to its super orange color and clear lens type.
598-8240-107F
Dialight's 598-8240-107F is a 2mm WATER CLEAR LED with 0.025A max forward current, emitting YELLOW light at 130.0mcd intensity. Ideal for surface mount applications in electronics, offering a wide 140° viewing angle and operating temperatures from -30°C to 85°C.
SSL-LXA3025IGC-TR
SSL-LXA3025IGC-TR by Lumex is a 2.8mm DUAL COLOR LED with 1 function, peak wavelengths of 635/565nm, and clear lens. Ideal for surface mount applications, it has a max forward current of 0.03A and operates b/w -40 to 85°C. With red/green colors and a viewing angle of 130°, it offers luminous intensity of 12.0/20.0mcd for versatile lighting solutions.
SML-D12P8WT86CJ
Visible LEDs; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier; JESD-609 Code: e4;
150060RS75000
Wuerth Elektronik & Kg
150060RS75000 by Wurth Elektronik is a single color LED with peak wavelength of 630nm and forward current of 0.03A. With water clear lens, it has a viewing angle of 140° and nominal luminous intensity of 250.0mcd. Ideal for surface mount applications in various electronic devices due to its compact size and red color output.
HSMH-C150
Broadcom
HSMH-C150 by Broadcom is a 2mm SINGLE COLOR LED with peak wavelength of 660nm. It has max forward current of 0.03A and viewing angle of 170°. Ideal for applications requiring red light emission, such as indicator lights in electronic devices.
HLMP-1700-B0002
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.1; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
598-8140-107F
Dialight's 598-8140-107F is a single color LED with water clear lens, emitting yellow light. It has a size of 1.2mm and max forward current of 0.025A, suitable for surface mount applications in various electronic devices due to its compact size and high luminous intensity of 130mcd.
LTST-C190KRKT
Lite-on Technology
LTST-C190KRKT by Lite-on Technology is a single color LED with peak wavelength of 639nm. It has a max forward current of 0.025A and viewing angle of 260°, making it ideal for surface mount applications in various electronic devices. With a water clear lens type and red color, this LED operates b/w -30°C to 85°C temperature range.
SSL-LX3059IGW
SSL-LX3059IGW by Lumex is a 3mm dual color LED with common cathode configuration. It has a peak wavelength of 635/565nm and max forward current of 0.025A, making it ideal for applications requiring high intensity red/green light output. With a viewing angle of 60° and radial mount feature, this LED is suitable for various lighting projects in temperatures ranging from -40 to 85°C.
151051BS04000
151051BS04000 by Wurth Elektronik is a 4.9mm SINGLE COLOR LED with 0.03A forward current and peak wavelength of 465nm. Ideal for applications requiring blue light emission, such as indicator lights in electronic devices due to its diffused lens type and radial mount feature.
LGA67K-G2K1-24-Z
Osram Opto Semiconductors
Osram Opto Semiconductors' LGA67K-G2K1-24-Z is a single color LED with a peak wavelength of 572nm and a max forward current of 0.02A. It has a round shape, measures 2.4mm in size, and is suitable for surface mount applications requiring a green light source with a viewing angle of 120°.
551-0409F
Dialight's 551-0409F LED is a 3mm red single color LED with peak wavelength of 650nm. It has a max forward current of 0.02A and forward voltage of 2V, suitable for applications requiring low power consumption and high visibility in products like electronic displays and indicators.
ASMB-MTB1-0B3A2
ASMB-MTB1-0B3A2 by Broadcom is a 2.4mm TRIPLE COLOR LED with COMMON ANODE, featuring peak wavelengths of 634/522/465nm and diffused lens. With max forward current of 0.025A, it offers red/green/blue colors and surface mounting for applications requiring high luminous intensity up to 2675mcd at a viewing angle of 115°.
SML-D12U1WT86
ROHM's SML-D12U1WT86 is a 1.2mm SINGLE COLOR LED with MILKY WHITE lens. It has a max forward current of 0.02A and nominal luminous intensity of 63.0mcd. Ideal for surface mount applications, operating b/w -40°C to 85°C, commonly used in visible LEDs for various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HSMY-C170
Hewlett Packard
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 5.25; Lens Type: DIFFUSED; No. of Functions: 1;
HSMY-C170 by Broadcom is a single color LED with a peak wavelength of 589nm and a viewing angle of 170°. It is commonly used in applications such as surface mount lighting due to its small size (1.4mm) and low power consumption (max forward current of 0.02A).
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 8.0; Lens Type: DIFFUSED; Terminal Finish: Gold (Au);
HSMY-C150
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 8.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HSMY-C150 by Broadcom is a 2mm SINGLE COLOR LED with peak wavelength of 589nm. It has a max forward current of 0.025A and viewing angle of 170°. Ideal for applications requiring yellow light emission, such as indicator lights in electronic devices.
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 5.25; Lens Type: DIFFUSED; Viewing Angle: 170 deg;
HSMY-C190
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 8.0; Lens Type: UNTINTED DIFFUSED; Terminal Finish: GOLD OVER NICKEL;
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 5.25; Lens Type: DIFFUSED; Size: 1 mm;
HSMY-C670
SINGLE COLOR LED; Lens Type: DIFFUSED; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier; Maximum Reverse Voltage: 5 V; Maximum Forward Voltage: 2.6 V; Viewing Angle: 155 deg;
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 5.0; Lens Type: TINTED DIFFUSED; Terminal Finish: Gold (Au);
SINGLE COLOR LED; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Yellow; Maximum Forward Voltage: 2.6 V; Peak Wavelength (nm): 584;
HSMY-C280
HSMY-C280 by Broadcom is a 1mm single color LED with peak wavelength of 589nm. It has a max forward current of 0.02A and viewing angle of 130°. Ideal for applications requiring yellow light emission, such as indicator lights in electronic devices.
HSMY-A100-J00J1
Broadcom's HSMY-A100-J00J1 is a 2.2mm SINGLE COLOR LED with peak wavelength of 583nm, forward current of 0.03A, and luminous intensity of 12.0mcd. Ideal for applications requiring a yellow light source, such as indicator lights in electronic devices due to its surface mount feature and 120° viewing angle.
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 12.0; Terminal Finish: Tin/Lead (Sn/Pb); Shape: ROUND;
HSMY-C191
HSMY-C110
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 5.75; Lens Type: DIFFUSED; Peak Wavelength (nm): 589;
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 8.0; Lens Type: CLEAR UNTINTED NONDIFFUSED; Terminal Finish: GOLD OVER NICKEL;
HSMY-C177
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved