Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: CHASSIS MOUNT; Capacitance: 4700 uF; Rated DC Voltage (URdc): 400 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: ALUMINUM (WET);
Median Price
$89.368
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Master Electronics
1+ parts
$71.236
100+ parts
$59.950
1k+ parts
-
10k+ parts
Verical
$107.500
$91.246
PEI Genesis
Farnell
Nova Conductors
$64.675
TME
$86.000
$76.820
Rapid Electronics
Vyrian
VNN
IBS Electronics
$66.422
AZTECH Wire
$5.323
Semicontronic
$51.980
$50.680
$50.421
Corohmni
$72.490
Continental Prestige Electronics
$97.130
$58.280
Ampacity Inc.
$113.130
Authorized Procurement Solutions
Argo Parts USA
Perfect Parts
Fixed Capacitors ALS31A472NP400 attributes and parameters. Explore more Fixed Capacitors devices from Aerovox
Capacitance:
Capacitor Type:
Dielectric Material:
Equivalent Series Resistance / ESR (mohm ):
Leakage Current (mA):
Manufacturer Series:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Reference Standard:
Ripple Current (mA):
Terminal Shape:
ALS31A472NP400 Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Cornell Dubilier’s roots can be traced back to 1909 when founder William Dubilier first used a glassy mineral called mica to help form a “condenser” (now called a “capacitor”). While the mica capacitor saw limited success for its intended application, it went on to revolutionize radio broadcast communications allowing for better transmission over longer distances. Growth and Prosperity Soon after inventing the mica capacitor, Dubilier started manufacturing capacitors and contributed to World War I by developing a system to detect submarines. The Dubilier Company was the earliest commercial manufacturer of capacitors, and in 1933, merged with Cornell Radio to form Cornell Dubilier Electronics (CDE). Fueled by the rise of radio and television broadcasting, the company experienced phenomenal growth, and by 1966, possessed more than 350 patents in radio and electrical sciences. Over time, the company grew even more to become one of the largest capacitor makers in the world. A Global Leader A privately held, American owned company, Cornell Dubilier Electronics has earned a global reputation for manufacturing quality, high-end capacitors. Almost all of the company’s capacitors are used in demanding industrial applications, separating themselves from the competition.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LL4148
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Secos
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SMBJ18CA
Synsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Telefunken
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
BAV99
Plessey Semiconductors Discrete Components Div
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Meritek Electronics
2N2222A
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
M39006/25-0143
Defense Logistics Agency
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 330 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: TANTALUM (WET);
C0603C103K3RACTU
KEMET Corporation
The KEMET C0603C103K3RACTU is a ceramic capacitor with 0.01uF capacitance and 25V rated DC voltage. Featuring X7R temperature characteristics, it operates b/w -55°C to 125°C. Ideal for surface mount applications in various electronic circuits due to its compact size and multi-layer design.
GCM188R71H224KA64D
Murata Manufacturing
Murata Manufacturing's GCM188R71H224KA64D is a ceramic capacitor with 0.22 uF capacitance, 50V URdc, X7R temp characteristics. It is SMT package for AEC-Q200 standard automotive applications.
CGA2B3X7R1H473K050BB
TDK
TDK's CGA2B3X7R1H473K050BB is a SMT ceramic capacitor with 0.047 uF capacitance, 50V URdc, and X7R temperature code. Ideal for AEC-Q200 applications requiring compact design, it operates b/w -55 to 125 °C with ±10% tolerance. Its multi-layer structure and matte tin finish make it suitable for automotive electronics.
C1005X5R0J106M050BC
The TDK C1005X5R0J106M050BC is a ceramic capacitor with 10uF capacitance and 6.3V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±20% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
GRM1555C1H220JA01D
GRM1555C1H220JA01D by Murata is a ceramic capacitor with capacitance of 0.000022uF and rated DC voltage of 50V. It has a temperature coefficient of 30ppm/°C, suitable for applications requiring stable performance in a wide temperature range. With SMT package style, it is ideal for compact electronic devices needing high-quality capacitors.
M39006/21-0159
Vishay Tansitor
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 75 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
ECA1HHG4R7
Panasonic
ECA1HHG4R7 by Panasonic is a 4.7uF Aluminum Electrolytic Capacitor with 50V URdc, suitable for AEC-Q200 standards. Featuring low Tan Delta of 0.12 and low Leakage Current of 0.003mA, it operates b/w -55°C to 105°C, making it ideal for automotive applications requiring high ripple current handling capabilities.
M39006/25-0236
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 60 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
GCM188R71H103KA37D
Murata Manufacturing's GCM188R71H103KA37D is a ceramic capacitor with 0.01uF capacitance, rated for 50V DC voltage. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
C0603C103J5RACTU
KEMET C0603C103J5RACTU is a ceramic capacitor with 0.01uF capacitance, 50V URdc, and X7R temperature code. Ideal for SMT applications due to its compact size (1.6mm x 0.8mm x 0.8mm) and high operating temperature range (-55°C to 125°C). Suitable for various electronic devices requiring stable capacitance in a small form factor.
C0603C472K5RACTU
KEMET C0603C472K5RACTU is a ceramic capacitor with capacitance of 0.0047uF and rated DC voltage of 50V. Featuring X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for SMT applications requiring compact size and high reliability. Its multi-layer design and wraparound terminals ensure stable performance in various electronic circuits.
CC0402KRX7R6BB104
Yageo
Yageo CC0402KRX7R6BB104 is a 0402 SMT ceramic capacitor with capacitance of 0.1uF, rated for 10V. It has X7R temperature characteristics and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and stable performance across -55 to 125°C range.
GCM32ER71H475KA55L
Murata Manufacturing's GCM32ER71H475KA55L is a ceramic capacitor with 4.7uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and compact size of 3.2x2.5x2.5mm.
UWT1V221MNL1GS
Nichicon
The Nichicon UWT1V221MNL1GS is a 220uF aluminum electrolytic capacitor with a rated DC voltage of 35V. It features a tan delta of 0.14, leakage current of 0.077mA, and ripple current of 190mA, making it ideal for automotive applications meeting AEC-Q200 standards.
12105C475KAZ2A
KYOCERA AVX
12105C475KAZ2A by KYOCERA AVX is a rectangular package ceramic capacitor with a capacitance of 4.7 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate in temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications.
TMK325B7226KMHP
Taiyo Yuden
Taiyo Yuden's TMK325B7226KMHP is a ceramic capacitor with 22uF capacitance and 25V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
B32652A7223J000
The TDK B32652A7223J000 is a film capacitor with 0.022 uF capacitance, rated for 1250V DC and 500V AC. With a temperature range of -55 to 110 °C, it's ideal for automotive applications meeting AEC-Q200 standards. Its rectangular package shape and radial terminal style make it suitable for through-hole mounting in various electronic circuits.
M39006/22-0351
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
0805B104K500CT
American Accurate Components
CERAMIC CAPACITOR; Capacitance: .1 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC; Custom Capabilities: Other Size,Cap,Volt & 13" Reel Available;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ALS30A223KE063
KEMET Corporation's ALS30A223KE063 is a 22000uF, 63V aluminum electrolytic capacitor with 6mA leakage current and 13900mA ripple current. Ideal for chassis mount applications due to its cylindrical package shape and screw terminal design.
Aerovox
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: CHASSIS MOUNT; Capacitance: 22000 uF; Rated DC Voltage (URdc): 63 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: ALUMINUM (WET);
ALS30A221DB450
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: CHASSIS MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 450 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: ALUMINUM (WET);
ALS31A473MF063
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: CHASSIS MOUNT; Capacitance: 47000 uF; Rated DC Voltage (URdc): 63 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: ALUMINUM (WET);
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: STUD MOUNT; Capacitance: 47000 uF; Rated DC Voltage (URdc): 63 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: ALUMINUM (WET);
ALS30A473DF025
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: CHASSIS MOUNT; Capacitance: 47000 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: ALUMINUM (WET);
ALS30A472NP400
ALS31A472NP400
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: STUD MOUNT; Capacitance: 4700 uF; Rated DC Voltage (URdc): 400 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: ALUMINUM (WET);
ALS30A223DE040
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: CHASSIS MOUNT; Capacitance: 22000 uF; Rated DC Voltage (URdc): 40 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: ALUMINUM (WET);
ALS30A102KE400
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: CHASSIS MOUNT; Capacitance: 1000 uF; Rated DC Voltage (URdc): 400 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: ALUMINUM (WET);
ALS30A472NJ400
ALS31A332NF400
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: STUD MOUNT; Capacitance: 3300 uF; Rated DC Voltage (URdc): 400 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: ALUMINUM (WET);
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: CHASSIS MOUNT; Capacitance: 3300 uF; Rated DC Voltage (URdc): 400 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: ALUMINUM (WET);
ALS31A472NF400
ALS31A472ND200
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: CHASSIS MOUNT; Capacitance: 4700 uF; Rated DC Voltage (URdc): 200 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: ALUMINUM (WET);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved