Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FIXED ATTENUATOR; Maximum Operating Frequency: 5000 MHz; Nominal Attenuation: 6 dB; Minimum Operating Frequency: 0 MHz; Minimum Operating Temperature: -55 Cel; Maximum Voltage Standing Wave Ratio: 1.25;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
RF/Microwave Attenuators 58-06-34 attributes and parameters. Explore more RF/Microwave Attenuators devices from Aeroflex/weinschel
Additional Features:
Nominal Attenuation:
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
JESD-609 Code:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
RF or Microwave Device Type:
Terminal Finish:
Maximum Voltage Standing Wave Ratio:
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
1N4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
2N7002
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
BAV99
Infineon Technologies
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0530T1G
Onsemi
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
1552200253
Molex
WIRE AND CABLE;
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
ADRF5730
Analog Devices
Analog Devices' ADRF5730 is a RF/Microwave Attenuator with 27.99 dBm CW power, 31.5 dB attenuation, and 50 ohm impedance. It operates from -55 to 105 °C, covering frequencies from 100 MHz to 40 GHz. Ideal for variable attenuation in RF/microwave systems.
M3933/25-62N
Aeroflex/weinschel
FIXED ATTENUATOR; Construction: COAXIAL; Maximum Input Power (CW): 33.01 dBm; Additional Features: SMA; Minimum Operating Frequency: 0 MHz; Maximum Operating Frequency: 18000 MHz;
290-20-43
Api Technologies
The Api Technologies 290-20-43 is a fixed attenuator with 20 dB nominal attenuation, handling up to 53.98 dBm CW power and supporting frequencies from 0 to 18 GHz. Ideal for RF/microwave applications, it features a max VSWR of 1.6 and gold terminal finish for reliable performance in panel-mounted setups.
MTVA0400N09W3F
Smiths Group Plc
MTVA0400N09W3F by Smiths Group Plc is a RF/Microwave Attenuator with 4 dB Nominal Attenuation, 23.01 dBm Max Input Power (CW), and 1.3 Max VSWR. It is a FIXED ATTENUATOR suitable for applications requiring attenuation in the frequency range of 0-12400 MHz with a temperature range of -55 to 150°C.
HMC424G16
Analog Devices' HMC424G16 is a RF/Microwave Attenuator with 31.5 dB Nominal Attenuation, 3.6 dB Max Insertion Loss, and -55 to 85°C Operating Temperature range. Ideal for applications requiring precise signal attenuation in the frequency range of 0-3000 MHz, this component offers low power consumption at 5 mA supply current.
HMC346ALP3E
Analog Devices' HMC346ALP3E is a RF attenuator with 30 dB attenuation, 18 dBm input power, and 1.92 VSWR. Ideal for variable attenuation in RF/microwave applications up to 14 GHz, it features GaAs technology and operates b/w -40°C to 85°C.
HMC657LP2
Analog Devices' HMC657LP2 is a 15 dB fixed attenuator with 25 dBm CW input power, ideal for RF/Microwave applications. Operating from -40 to 85°C, it covers frequencies up to 25 GHz with a characteristic impedance of 50 ohms. The component features Tin/Lead terminal finish and is suitable for various communication systems.
MAATCC0005-TB
Tyco Electronics M/a-com
VARIABLE ATTENUATOR; Maximum Operating Temperature: 85 Cel; Nominal Attenuation: 31.5 dB; JESD-609 Code: e3; Maximum Operating Frequency: 2000 MHz; Maximum Input Power (CW): 33.98 dBm;
RFSA2013SR
Rf Micro Devices
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: CMOS; Maximum Operating Temperature: 85 Cel;
75-10-11
Cobham Plc
75-10-11 by Cobham Plc is a fixed attenuator with 10 dB nominal attenuation, handling up to 36.99 dBm CW power and supporting frequencies from 0 to 40 GHz. Ideal for RF/microwave applications, it boasts a low VSWR of 1.35 and operates in temperatures ranging from -55°C to 125°C.
LCAT1001-05
Infinite Electronics International
FIXED ATTENUATOR;
284-3-13
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Package Body Material: METAL; Nominal Attenuation: 3 dB; Minimum Operating Temperature: -55 Cel; Construction: COAXIAL;
45-3-43
FIXED ATTENUATOR; Terminal Finish: Gold (Au); Maximum Input Power (CW): 56.99 dBm; Maximum Operating Frequency: 1500 MHz; Minimum Operating Temperature: -55 Cel; Maximum Voltage Standing Wave Ratio: 1.1;
19-7-2
FIXED ATTENUATOR; Minimum Operating Temperature: -55 Cel; Minimum Operating Frequency: 0 MHz; Maximum Input Power (CW): 30 dBm; Maximum Operating Frequency: 18000 MHz; Maximum Voltage Standing Wave Ratio: 1.35;
1-1
FIXED ATTENUATOR; Construction: COAXIAL; Maximum Voltage Standing Wave Ratio: 1.25; Minimum Operating Frequency: 0 MHz; Minimum Operating Temperature: -55 Cel; Characteristic Impedance: 50 ohm;
HMC-C053
Analog Devices' HMC-C053 is a COAXIAL RF attenuator with 33 dB nominal attenuation and 17.99 dBm CW input power. It operates from -55°C to 85°C, ideal for variable attenuation in RF/Microwave applications up to 2 GHz frequency range.
56-10
FIXED ATTENUATOR; Maximum Voltage Standing Wave Ratio: 1.25; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 100 Cel; Nominal Attenuation: 10 dB; Additional Features: 3.5 MM, I/P POWER-MAX(PEAK)=500W;
HMC8802
HMC8802 by Analog Devices is a RF/Microwave Attenuator with 33.7 dB Nominal Attenuation, 4.6 dB Max Insertion Loss, and 25 dBm Max Input Power (CW). It is a VARIABLE ATTENUATOR suitable for applications requiring precise signal control in the frequency range of 0-13000 MHz.
32-8.5
FIXED ATTENUATOR; Minimum Operating Frequency: 0 MHz; JESD-609 Code: e4; Nominal Attenuation: 8.5 dB; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 125 Cel;
3221-2
Aeroflex/weinschel 3221-2 is a RF/Microwave Attenuator with 120 dB attenuation, 30 dBm CW power handling, and 1.3 max VSWR. It's a variable attenuator module for frequencies from 0 to 2000 MHz, ideal for signal level control in RF/microwave testing applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved