Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FIXED ATTENUATOR; JESD-609 Code: e4; Construction: COAXIAL; Nominal Attenuation: 20 dB; Maximum Input Power (CW): 43.98 dBm; Terminal Finish: Gold (Au);
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
RF/Microwave Attenuators 34-20-33 attributes and parameters. Explore more RF/Microwave Attenuators devices from Aeroflex/weinschel
Additional Features:
Nominal Attenuation:
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
JESD-609 Code:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
RF or Microwave Device Type:
Terminal Finish:
Maximum Voltage Standing Wave Ratio:
2N2222A
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
1N4148
Unitrode
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
LL4148
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
Transys Electronics
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NXP Semiconductors
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
LM358DR2G
Onsemi
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
Fairchild Semiconductor
SMBJ18CA
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
59-30-42
Cobham Plc
59-30-42 by Cobham Plc is a RF/Microwave Attenuator with max input power of 50 dBm, VSWR of 1.15, and attenuation of 30 dB. It operates b/w -55 to 100°C, has gold terminal finish, and impedance of 50 ohm. Ideal for applications requiring fixed attenuation in the frequency range of 0-2500 MHz.
HMC472ALP4TR
Analog Devices
Analog Devices' HMC472ALP4TR is a GAAS technology RF attenuator with 31.5 dB attenuation, 3 dB insertion loss, and 1.22 VSWR. Ideal for RF/microwave applications up to 3800 MHz, it operates b/w -40 °C to 85°C with a max input power of 28 dBm.
32-9.5
32-9.5 by Cobham Plc is a fixed attenuator with a nominal attenuation of 9.5 dB, suitable for RF/Microwave applications. It has a max input power of 33.01 dBm and can operate b/w -55 to 125°C, covering frequencies from 0 to 18 GHz with a VSWR of 1.35 for precise signal control in various systems.
HMC603QS16E
HMC603QS16E by Analog Devices is a RF/Microwave Attenuator with 15.5 dB Nominal Attenuation, 3 dB Max Insertion Loss, and 30 dBm Max Input Power (CW). It operates from -40 to 85 °C and has a frequency range of 700-3800 MHz. Ideal for variable attenuation in RF/microwave applications.
40-10-23
40-10-23 by Cobham Plc is a RF/Microwave Attenuator with max input power of 51.76 dBm, VSWR of 1.1, and attenuation of 10 dB. It operates b/w -55 to 125°C, has gold terminal finish, and supports frequencies from 0 to 1500 MHz. Ideal for panel mount applications in military and aerospace industries.
24-3-63
Api Technologies
FIXED ATTENUATOR; Characteristic Impedance: 50 ohm; Maximum Voltage Standing Wave Ratio: 1.3; JESD-609 Code: e4; Minimum Operating Temperature: -55 Cel; Minimum Operating Frequency: 0 MHz;
LCAT1004-30
L-com
FIXED ATTENUATOR;
MTVA0400N09S
Smiths Group Plc
The Smiths Group Plc MTVA0400N09S is a RF/Microwave Attenuator with 4 dB Nominal Attenuation, 23.01 dBm Max Input Power (CW), and 1.3 Max VSWR. It operates in the frequency range of 0-12400 MHz, making it suitable for signal attenuation in various RF/microwave applications.
RFSA2013SR
Qorvo
The Qorvo RFSA2013SR is a CMOS variable attenuator with 30 dB nominal attenuation and 3.5 dB max insertion loss. It operates from 50 MHz to 6 GHz, ideal for RF/microwave applications requiring precise signal control in a surface mount package. With a max input power of 30 dBm, it offers reliable performance in temperatures ranging from -40°C to 105°C.
HMC629LP4E
Analog Devices' HMC629LP4E is a GAAS technology RF attenuator with 45 dB attenuation, 5 dB insertion loss, and 27.99 dBm max input power. Ideal for variable attenuation in RF/microwave applications up to 6 GHz, featuring a surface mount package with 24 terminals and operating temperatures from -40°C to +85°C.
TS0320W3F
TS0320W3F by Smiths Group Plc is a RF/Microwave Attenuator with 20 dB Nominal Attenuation, 1.5 Max VSWR, and 33.01 dBm Max Input Power. Ideal for fixed attenuation in RF/Microwave applications with a frequency range of 0-12400 MHz and operating temperatures from -55 to 150°C.
HMC288MS8
HMC288MS8 by Analog Devices is a RF/Microwave Attenuator with 14 dB Nominal Attenuation, 2.3 dB Max Insertion Loss, and operates b/w 700 MHz to 3700 MHz. It is a GAAS technology-based VARIABLE ATTENUATOR suitable for applications requiring precise signal control in the frequency range of 700-3700 MHz.
19-7-2
19-7-2 by Cobham Plc is a fixed attenuator with 7 dB nominal attenuation, handling up to 30 dBm CW input power. With a VSWR of 1.35, it operates in the RF/Microwave range from 0-18000 MHz. Constructed coaxially, it's ideal for applications requiring precise signal attenuation in various temperature conditions.
32-10
Cobham Plc's 32-10 is a RF/Microwave Attenuator with max input power of 33.01 dBm, VSWR of 1.35, and nominal attenuation of 10 dB. It is a coaxial fixed attenuator with a characteristic impedance of 50 ohm, operating frequency range from 0 MHz to 18000 MHz, and can withstand temperatures from -55°C to 125°C.
55-2
FIXED ATTENUATOR; Construction: COAXIAL; Minimum Operating Frequency: 0 MHz; Minimum Operating Temperature: -55 Cel; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 18000 MHz;
HMC346
Analog Devices' HMC346 is a GAAS-based RF attenuator with 32 dB attenuation and 2.8 dB insertion loss, suitable for frequencies up to 20 GHz. With a max input power of 17.99 dBm, it's ideal for RF/microwave applications requiring precise signal control in temperatures ranging from -55°C to 85°C.
6A-40
6A-40 by Cobham Plc is a COAXIAL FIXED ATTENUATOR with 40 dB Nominal Attenuation, 1.2 Max VSWR, and 33.01 dBm Max Input Power (CW). It operates from -65°C to 125°C and covers frequencies from 0 MHz to 6 GHz, making it ideal for RF/Microwave applications requiring precise signal attenuation.
HMC306MS10
HMC306MS10 by Analog Devices is a RF/Microwave Attenuator with 15.5 dB Nominal Attenuation, 28.06 dBm Max Input Power (CW), and 2.7 dB Max Insertion Loss. It is a GAAS technology-based VARIABLE ATTENUATOR suitable for applications requiring precise signal attenuation in the frequency range of 700 MHz to 3800 MHz.
TVA0500N09W3S
Emc Technology & Florida Rf Labs
TVA0500N09W3S by Emc Technology & Florida Rf Labs is a fixed attenuator with a max input power of 33.01 dBm and a max VSWR of 1.3. It operates in the frequency range of 0-6000 MHz and is commonly used in RF/Microwave applications for signal attenuation.
HMC424LP3TR
Analog Devices' HMC424LP3TR is a RF/Microwave Attenuator with 31.5 dB Nominal Attenuation, 25.05 dBm Max Input Power (CW), and 4.6 dB Max Insertion Loss. It is a VARIABLE ATTENUATOR suitable for applications requiring precise signal attenuation in the frequency range of 0-13000 MHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Aeroflex/weinschel
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved