Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FIXED ATTENUATOR; Construction: COAXIAL; Characteristic Impedance: 50 ohm; Maximum Input Power (CW): 33.01 dBm; Maximum Voltage Standing Wave Ratio: 1.3; Nominal Attenuation: 5 dB;
Median Price
$1.780
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
TME
1+ parts
100+ parts
$1.340
1k+ parts
-
10k+ parts
Lakeview Electronics
RF/Microwave Attenuators 2031-5 attributes and parameters. Explore more RF/Microwave Attenuators devices from Aeroflex/inmet
Additional Features:
Nominal Attenuation:
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
JESD-609 Code:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
RF or Microwave Device Type:
Terminal Finish:
Maximum Voltage Standing Wave Ratio:
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
BAV99
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Alpha & Omega Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
Lite-on Semiconductor
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
OPA2277UA/2K5
Texas Instruments
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
MURS160T3G
Onsemi
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
2N7002
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
1N4148
Frontier Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
LM317AEMP/NOPB
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
HMC939LP4
Analog Devices
HMC939LP4 by Analog Devices is a RF/Microwave Attenuator with 31 dB Nominal Attenuation, 7.5 dB Max Insertion Loss, and 25.05 dBm Max Input Power (CW). It operates b/w 100 MHz to 33 GHz, making it ideal for signal attenuation in high-frequency applications. With a temperature range of -40°C to 85°C, it is suitable for various environments.
HMC425LP3TR
HMC425LP3TR by Analog Devices is a RF/Microwave Attenuator with 31.5 dB Nominal Attenuation, 4.3 dB Max Insertion Loss, and operates b/w 2200-8000 MHz. It is a variable attenuator suitable for applications requiring precise signal control in the frequency range of 2.2-8 GHz.
LCAT1002-09
L-com
FIXED ATTENUATOR;
66-10-32
Api Technologies
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Minimum Operating Temperature: -55 Cel; Characteristic Impedance: 50 ohm; JESD-609 Code: e4; Maximum Operating Temperature: 100 Cel;
ADRF5473BCZ
VARIABLE ATTENUATOR;
44-30
Cobham Plc
44-30 by Cobham Plc is a COAXIAL fixed attenuator with 30 dB nominal attenuation, suitable for RF/Microwave applications. It has a max input power of 36.99 dBm and can operate b/w -50 to 85 °C, covering frequencies from 0 to 18000 MHz. With a VSWR of 1.25 and gold terminal finish, it offers reliable performance in various systems.
4782-3
L3harris Technologies
FIXED ATTENUATOR; Nominal Attenuation: 3 dB; Construction: COAXIAL; Maximum Input Power (CW): 33.01 dBm; Maximum Voltage Standing Wave Ratio: 1.4; Minimum Operating Frequency: 0 MHz;
HMC656
Analog Devices' HMC656 is a RF/Microwave Attenuator with 10 dB Nominal Attenuation and 25.05 dBm Max Input Power (CW). Constructed using GAAS technology, it operates b/w -55°C to 85°C. Ideal for applications requiring fixed attenuation in the frequency range of 0-50 GHz.
HMC712LP3CETR
Analog Devices' HMC712LP3CETR is a GaAs technology RF attenuator with 16 terminals. It operates b/w -40 °C to 85°C, suitable for surface mount applications in RF/Microwave circuits. The plastic/epoxy package body ensures durability and reliability in various electronic systems.
66-10-24
The Cobham Plc 66-10-24 is a RF fixed attenuator with 10 dB nominal attenuation, 1.9 max VSWR, and 51.76 dBm CW input power. Constructed coaxially for durability, it operates b/w -55°C to 100°C and supports frequencies from 0 MHz to 18 GHz. Ideal for panel mounting in RF/Microwave applications requiring precise signal control.
LCAT1001-01
Infinite Electronics International
MTVA0200N09F
Emc Technology & Florida Rf Labs
FIXED ATTENUATOR; Nominal Attenuation: 2 dB; Minimum Operating Frequency: 0 MHz; Minimum Operating Temperature: -55 Cel; Terminal Finish: Silver (Ag); Construction: COMPONENT;
HMC307QS16GERTR
Analog Devices' HMC307QS16GERTR is a RF/Microwave Attenuator with 16 terminals, operating from -40°C to 85°C. Utilizing GaAs technology, it has a max supply current of 6mA at -5V. Ideal for applications requiring surface mount packaging in plastic/epoxy material.
55-5
FIXED ATTENUATOR; Nominal Attenuation: 5 dB; Maximum Input Power (CW): 36.99 dBm; Maximum Voltage Standing Wave Ratio: 1.35; Minimum Operating Temperature: -55 Cel; Construction: COAXIAL;
87-7.5
87-7.5 by Cobham Plc is a RF/Microwave Attenuator with max input power of 33.01 dBm, VSWR of 1.25, and attenuation of 7.5 dB. Constructed coaxially, it operates b/w -55 to 100°C and has gold terminal finish. Ideal for fixed attenuator applications in the frequency range of 0-32000 MHz at 50 ohm impedance.
5413
FIXED ATTENUATOR; Terminal Finish: Nickel (Ni); Characteristic Impedance: 50 ohm; Minimum Operating Frequency: 0 MHz; Maximum Input Power (CW): 43.01 dBm; Construction: MODULE;
HMC985A
Analog Devices' HMC985A is a GAAS-based RF attenuator with 40 dB nominal attenuation, 30 dBm CW input power, and 4 dB max insertion loss. Ideal for applications requiring variable attenuation in the frequency range of 20-50 GHz.
17-2
The Cobham Plc 17-2 is a fixed attenuator with 2 dB nominal attenuation, handling up to 36.99 dBm CW power and supporting frequencies from 0-18000 MHz. This RF/Microwave device has a VSWR of 1.2, operates b/w -50°C to +85°C, and features a gold terminal finish for high-quality connections in various applications.
HRF-AT4521-TR
Honeywell
HRF-AT4521-TR by Honeywell is a RF/Microwave Attenuator with 31 dB Nominal Attenuation, 3.4 dB Max Insertion Loss, and 2500 MHz Max Operating Frequency. It is a VARIABLE ATTENUATOR suitable for applications requiring precise signal attenuation in CMOS technology.
PSA-10
FIXED ATTENUATOR; Characteristic Impedance: 50 ohm; Maximum Voltage Standing Wave Ratio: 1.5; Nominal Attenuation: 10 dB; Additional Features: HIGH RELIABILITY; Minimum Operating Temperature: -55 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Aeroflex/inmet
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved