Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 5 PPM/FIRST YEAR; Physical Dimension: L8.0XB3.8XH2.5 (mm)/L0.315XB0.15XH0.098 (inch); Maximum Operating Temperature: 85 Cel;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Crystal Oscillators ABS25-100.000KHZ-6-T attributes and parameters. Explore more Crystal Oscillators devices from Abracon
Additional Features:
Aging:
Crystal or Resonator Type:
Drive Level:
Frequency Stability:
Frequency Tolerance:
Load Capacitance:
Mounting Feature:
Nominal Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Physical Dimension:
Series Resistance:
ABS25-100.000KHZ-6-T Crystals & Resonators trade compliance attributes, and parameters.
HTS
8541.60.00.20
SB
8541.60.00.25
Abracon is a trusted supplier of leading-edge and innovative electronic components including Frequency Control, Timing, Power, Magnetics, RF and Antenna solutions. Servicing world-class companies across the data communication, transportation, industrial, medical, consumer, aerospace, and defense industries, Abracon accelerates customers’ time-to-market by providing unmatched product solutions, technical expertise, and service excellence.
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
FDN306P
Onsemi
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
BAV99
Kingwell Technonlogy
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
LM317D2TG
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
1N4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
0462-201-16141
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
2N2222A
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FOXSDLF/160-20
Fox Electronics
FOXSDLF/160-20 by Fox Electronics is a 16 MHz crystal oscillator with 30 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w -20 to 70 °C, features Tin/Silver/Copper finish, and has low aging at 5 PPM/YEAR.
ABM8-18.432MHZ-B2-T
ABM8-18.432MHZ-B2-T by Abracon is a 18.432 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing in temperature range of -20 to 70 °C, such as telecommunications equipment and industrial automation systems.
ABLS-5.000MHZ-B-2-T
ABLS-5.000MHZ-B-2-T by Abracon is a 5 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w -20°C to 70°C, featuring a parallel-fundamental crystal type and matte tin finish for surface mount assembly.
FC-135R32.7680KA-E3
Seiko Epson
Seiko Epson's FC-135R32.7680KA-E3 crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing at a frequency of 0.032768 MHz, such as in telecommunications equipment or industrial automation systems.
ABM7-11.0592MHZ-D-2-Y-T
Abracon's ABM7-11.0592MHZ-D-2-Y-T crystal oscillator offers 20 ppm frequency tolerance, 30% stability, and 60 ohm series resistance. Ideal for applications requiring a parallel fundamental type resonator at 11.0592 MHz frequency, with gold terminal finish and surface mounting feature.
LFXTAL003206
Iqd Frequency Products
Quartz Crystals;
ABM3-25.000MHZ-D2Y-T
ABM3-25.000MHZ-D2Y-T by Abracon is a 25 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, such as telecommunications equipment or industrial automation systems. Features surface mounting and nickel gold terminal finish for reliable performance in temperature range of -40 to 85 °C.
HC49S-10-30-50-70-30-ATF
Multicomp Pro
HC49S-10-30-50-70-30-ATF by Multicomp Pro is a crystal oscillator with 30 ppm frequency tolerance, 50% stability, and 50 ohm series resistance. Ideal for applications requiring precise timing at 10 MHz, such as telecommunications equipment or industrial automation systems.
NX3215SA-32.768K-STD-MUS-2
Nihon Dempa Kogyo
NX3215SA-32.768K-STD-MUS-2 by Nihon Dempa Kogyo is a crystal oscillator with 20 ppm frequency tolerance, 400% stability, and 80000 ohm series resistance. Ideal for applications requiring precise timing at frequencies of 0.032768 MHz in a compact surface mount package.
ATS042-E
Cts
ATS042-E by Cts is a crystal oscillator with 30 ppm frequency tolerance, 50% stability, and 150 ohm series resistance. Ideal for applications requiring precise timing at 4.9152 MHz, it operates b/w -40 to 85 °C with through-hole mounting and PARALLEL-FUNDAMENTAL type.
XRCGB27M120F3M00R0
Murata Manufacturing
Murata Manufacturing's XRCGB27M120F3M00R0 crystal oscillator operates at 27.12 MHz with 30 ppm frequency tolerance and 40% stability. Suitable for surface mount applications, it has a series resistance of 150 ohm and load capacitance of 6 pF. Ideal for various electronic devices requiring precise timing control.
CM8V-T1A32.768KHZ12.5PF+/-20PPMTCQC
Micro Crystal Ag
CM8V-T1A32.768KHZ12.5PF+/-20PPMTCQC by Micro Crystal Ag is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. Ideal for applications requiring precise timing such as in telecommunications equipment or industrial automation systems due to its high accuracy and reliability in extreme temperature conditions from -55°C to 125°C.
ABLS2-11.059MHZ-B4Y-T
ABLS2-11.059MHZ-B4Y-T by Abracon is a 11.059 MHz crystal oscillator with 30 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, it operates b/w -20°C to 70°C and features a compact surface mount design.
NX3225SA-12.000M-STD-CRS-2
NX3225SA-12.000M-STD-CRS-2 by Nihon Dempa Kogyo is a crystal oscillator with a frequency tolerance of 15 ppm and frequency stability of 50%. It has a series resistance of 120 ohm and is suitable for surface mount applications.
9HT10-32.768KDZC-T
Txc
9HT10-32.768KDZC-T by Txc is a crystal oscillator with 20 ppm frequency tolerance, 108% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing such as IoT devices, wearables, and communication equipment due to its compact size (3.2mm x 1.5mm x 0.75mm) and low drive level of 1 uW.
ABLS-14.7456MHZ-B-2-T
ABLS-14.7456MHZ-B-2-T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 50% stability, and 5 PPM/first year aging. Ideal for applications requiring precise timing at frequencies around 14.7456 MHz in various electronic devices due to its compact surface mount design and reliable performance.
CM7V-T1A32.768KHZ12.5PF+/-20PPMTAQC
CM7V-T1A32.768KHZ12.5PF+/-20PPMTAQC by Micro Crystal Ag is a crystal oscillator with a frequency tolerance of 20 ppm and frequency stability of 126%. It is commonly used in applications requiring precise timing, such as telecommunications and industrial automation.
CM315D32768DZCT
Citizen Finedevice
Citizen Finedevice's CM315D32768DZCT crystal oscillator offers 20 ppm frequency tolerance, 70000 ohm series resistance, and 0.032768 MHz nominal operating frequency. Ideal for applications requiring precise timing in a compact form factor, such as IoT devices and wearables.
ABM8W-28.6364MHZ-6-D1X-T3
ABM8W-28.6364MHZ-6-D1X-T3 by Abracon is a crystal oscillator with 10 ppm frequency tolerance, 20% stability, and 100 ohm series resistance. Ideal for applications requiring precise timing at 28.6364 MHz, such as telecommunications equipment or industrial automation systems. Operating temperature range from -40 to 85 °C with GOLD OVER NICKEL finish for durability.
FA-12824.0000MF10Z-W3
Seiko Epson FA-12824.0000MF10Z-W3 crystal oscillator offers 24 MHz nominal frequency, 10 ppm tolerance, and 10% stability. Ideal for applications requiring precise timing in a compact surface-mount package with gold over nickel finish. Operating temperature range from -20 to 75°C makes it versatile for various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved