Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ABM3-24.000MHZ-B4Y-T by Abracon is a 24 MHz crystal oscillator with 30 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, such as telecommunications equipment or industrial automation systems. Operating temperature range from -20 to 70 °C with surface mount feature for easy installation.
Median Price
$0.366
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Arrow
1+ parts
$0.205
100+ parts
$0.108
1k+ parts
-
10k+ parts
Mouser Electronics
$0.520
$0.376
$0.328
$0.241
DigiKey
$0.590
$0.448
$0.406
Chip1Stop
Verical
Nova Conductors
$0.388
VNN
Vyrian
Corohmni
$0.382
Netroflash
$0.380
Advanced Electronics
$1.437
$1.308
$1.178
The low frequency tolerance of 30 ppm ensures high accuracy in timing applications, making this crystal oscillator a reliable choice.
With a frequency stability of 30%, this crystal oscillator maintains consistent performance over a wide range of conditions, making it suitable for diverse environments.
The low series resistance of 30 ohms minimizes power loss and ensures efficient operation of the crystal oscillator.
The wide minimum operating temperature range of -20°C allows this crystal oscillator to function reliably in cold environments.
The nickel gold terminal finish provides excellent conductivity and corrosion resistance, enhancing the durability of the crystal oscillator.
The parallel fundamental crystal or resonator type offers stable and precise frequency output, making it ideal for high-performance applications.
The nominal operating frequency of 24 MHz suits a wide range of electronic devices and systems that require accurate timing signals.
The low aging rate of 5 ppm/first year ensures long-term stability and reliability of the crystal oscillator over extended periods of use.
The load capacitance of 18 pF provides optimal tuning for the crystal oscillator, enhancing its performance in frequency control applications.
The surface mounting feature offers easy and secure installation of the crystal oscillator on circuit boards, saving space and simplifying assembly.
The low drive level of 10 uW ensures energy-efficient operation of the crystal oscillator, reducing power consumption in electronic devices.
The compact physical dimensions of this crystal oscillator make it suitable for space-constrained applications where size is a critical factor.
The high maximum operating temperature of 70°C allows this crystal oscillator to withstand elevated temperatures without compromising performance.
Crystal Oscillators ABM3-24.000MHZ-B4Y-T attributes and parameters. Explore more Crystal Oscillators devices from Abracon
Additional Features:
Aging:
Crystal or Resonator Type:
Drive Level:
Frequency Stability:
Frequency Tolerance:
JESD-609 Code:
Load Capacitance:
Mounting Feature:
Nominal Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Physical Dimension:
Series Resistance:
Terminal Finish:
ABM3-24.000MHZ-B4Y-T Crystals & Resonators trade compliance attributes, and parameters.
HTS
8541.60.00.60
SB
Abracon is a trusted supplier of leading-edge and innovative electronic components including Frequency Control, Timing, Power, Magnetics, RF and Antenna solutions. Servicing world-class companies across the data communication, transportation, industrial, medical, consumer, aerospace, and defense industries, Abracon accelerates customers’ time-to-market by providing unmatched product solutions, technical expertise, and service excellence.
BAV99
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
1N4148
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
Itt Semiconductor
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
MC33269T-3.3G
Onsemi
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Bytesonic Electronics
Unitrode
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
Grande Electronics
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
TFPM2P32K7680R
Cts
CTS TFPM2P32K7680R crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as telecommunications and industrial automation. Operating temperature ranges from -40 to 85°C with compact dimensions of L8.0xB3.8xH2.5 mm.
ABLS-25.000MHZ-8-D-4-Y-F-T
Abracon
ABLS-25.000MHZ-8-D-4-Y-F-T by Abracon is a 25 MHz crystal oscillator with 30 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, it operates b/w -40 to 85 °C and features a parallel fundamental crystal type.
HC49U-12.288-20-50-60-30-ATF
Multicomp Pro
HC49U-12.288-20-50-60-30-ATF by Multicomp Pro is a 12.288 MHz crystal oscillator with 20 ppm frequency tolerance, 50% stability, and 35 ohm series resistance. Ideal for applications requiring precise timing such as telecommunications equipment due to its high accuracy and reliability in extreme temperature conditions from -10°C to 60°C.
CM315D32768EZFT
Citizen Finedevice
Citizen Finedevice's CM315D32768EZFT crystal oscillator offers 10 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
NX3225SA-20.000M-STD-CRS-2
Nihon Dempa Kogyo
NX3225SA-20.000M-STD-CRS-2 by Nihon Dempa Kogyo is a crystal oscillator with 15 ppm frequency tolerance, 50% stability, and 120 ohm series resistance. Ideal for applications requiring a 20 MHz nominal operating frequency, such as in surface mount devices where precise timing is crucial.
ABS06-107-32.768KHZ-T
Abracon ABS06-107-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 250% stability, and 80000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency in a compact L2.0XB1.2XH0.6 mm surface mount package with GOLD terminal finish.
ABM3B-48.000MHZ-B-2-T
ABM3B-48.000MHZ-B-2-T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 50% stability, and 50 ohm series resistance. Operating at 48 MHz, it features nickel/gold terminal finish and parallel - 3rd overtone type. Ideal for applications requiring precise timing in electronics within -20 to 70 °C temperature range.
ECS-.327-12.5-12QS-TR
Ecs International
ECS-0.327-12.5-12QS-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 400% stability, and 90000 ohm series resistance. Ideal for applications requiring precise timing such as telecommunications equipment due to its low aging rate of 3 PPM/yr and operating temperature range from -40°C to 125°C.
ABS07-32.768KHZ-6-4-T
Abracon's ABS07-32.768KHZ-6-4-T crystal oscillator offers 30 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at a frequency of 0.032768 MHz, such as in IoT devices or precision instruments.
ECS-.327-12.5-49--TR
ECS-0.327-12.5-49--TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency, it operates b/w -40 to 85 °C with gold-nickel terminal finish in a compact 4.1mm x 1.5mm x 0.9mm surface mount package.
X1E000021011400
Seiko Epson
Seiko Epson X1E000021011400 crystal oscillator offers 16 MHz nominal frequency with 10 ppm tolerance and 10% stability. Ideal for applications requiring precise timing in a compact surface-mount design, operating b/w -20°C to 75°C with low aging at 1 PPM/first year.
ABL-6.000MHZ-B2
ABL-6.000MHZ-B2 by Abracon is a 6 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w -20 to 70 °C, featuring a parallel-fundamental crystal type and through-hole mounting.
MC-14632.7680KA-A5:PURESN
MC-14632.7680KA-A5:PURESN by Seiko Epson is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 65000 ohm series resistance. It operates at 0.032768 MHz and is ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C.
CM7V-T1A32.768KHZ12.5PF+/-20PPMTBQC
Micro Crystal Ag
CM7V-T1A32.768KHZ12.5PF+/-20PPMTBQC by Micro Crystal Ag is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 350% stability. Ideal for applications requiring precise timing, it operates in temperatures ranging from -40 to 125 °C, featuring a gold terminal finish and surface mounting feature.
RSM200S-32.768-12.5-TR-NPB
Raltron Electronics
RSM200S-32.768-12.5-TR-NPB by Raltron Electronics is a crystal oscillator with 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency, such as IoT devices due to its compact size (8.0mm x 3.8mm x 2.5mm) and low drive level of 1 uW.
MP049B-E
CTS MP049B-E crystal oscillator operates at 4.9152 MHz with 30 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it features a parallel fundamental type, through-hole mounting, and -40 to 85°C operating temperature range.
ABM8G-25.000MHZ-B-4-Y-T3
ABM8G-25.000MHZ-B-4-Y-T3 by Abracon is a 25 MHz crystal oscillator with 30 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing in temperature range of -20 to 70 °C, such as telecommunications equipment and industrial automation systems.
ECS-120-20-3X-TR
ECS-120-20-3X-TR by Ecs International is a crystal oscillator with a frequency tolerance of 30 ppm and frequency stability of 50%. It is commonly used in applications requiring a nominal operating frequency of 12 MHz, such as communication systems and electronic devices.
ABL-22.1184MHZ-B2
Abracon's ABL-22.1184MHZ-B2 crystal oscillator offers 20 ppm frequency tolerance, 50% stability, and 40 ohm series resistance. Ideal for applications requiring a nominal operating frequency of 22.1184 MHz, such as telecommunications equipment and industrial automation systems.
CM315D32768DZYT
CM315D32768DZYT by Citizen Finedevice is a crystal oscillator with a frequency tolerance of 20 ppm and series resistance of 70000 ohm. It operates at a nominal frequency of 0.032768 MHz and is suitable for surface mount applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ABM3B-12.000MHZ-B-2-T
ABM3B-12.000MHZ-B-2-T by Abracon is a 12 MHz crystal oscillator with a frequency tolerance of 20 ppm and frequency stability of 50%. It is commonly used in applications requiring precise timing, such as telecommunications and industrial automation.
ABM3B-25.000MHZ-B-2-T
ABM3B-25.000MHZ-B-2-T by Abracon is a 25 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w -20 to 70 °C and features nickel/gold terminal finish.
ABM3-25.000MHZ-D2Y-T
ABM3-25.000MHZ-D2Y-T by Abracon is a 25 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, such as telecommunications equipment or industrial automation systems. Features surface mounting and nickel gold terminal finish for reliable performance in temperature range of -40 to 85 °C.
ABM3C-25.000MHZ-D4Y-T
ABM3C-25.000MHZ-D4Y-T by Abracon is a 25 MHz crystal oscillator with 30 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing in temperature range of -40 to 85 °C, such as telecommunications equipment and industrial automation systems.
ABM3-8.000MHZ-D2Y-T
ABM3-8.000MHZ-D2Y-T by Abracon is a crystal oscillator with 20 ppm frequency tolerance and 30% frequency stability. It is used in applications requiring an 8 MHz nominal operating frequency, such as communication systems and microcontrollers.
ABM3B-8.000MHZ-B-2-T
ABM3B-8.000MHZ-B-2-T by Abracon is a 8 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing in electronics, it operates b/w -20 to 70 °C, featuring nickel/gold terminal finish and parallel-fundamental type.
ABM3B-8.000MHZ-10-1-U-T
ABM3B-8.000MHZ-10-1-U-T by Abracon is a 8 MHz crystal oscillator with 10 ppm frequency tolerance and 10% stability. Ideal for applications requiring precise timing in temperature range of -10 to 60 °C, such as telecommunications equipment and industrial automation systems.
ABM3-12.000MHZ-D2Y-T
ABM3-12.000MHZ-D2Y-T by Abracon is a 12 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, it operates b/w -40 to 85 °C and features nickel gold terminal finish.
ABM3B-16.000MHZ-B-2-T
ABM3B-16.000MHZ-B-2-T by Abracon is a 16 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing in electronics, telecommunications, and industrial automation due to its compact size and high performance.
ABM3B-13.824MHZ-B-2-T
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 5 PPM/FIRST YEAR; Frequency Stability: 50 %; Maximum Operating Temperature: 70 Cel;
ABM3-25.000MHZ-B2-T
ABM3-25.000MHZ-B2-T by Abracon is a 25 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing in electronics, telecommunications, and industrial automation due to its compact surface mount design and low drive level of 10 uW.
ABM3-16.000MHZ-B2-T
ABM3-16.000MHZ-B2-T by Abracon is a 16 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing in electronics, telecommunications, and industrial automation due to its compact surface mount design and nickel gold terminal finish.
ABM3-24.000MHZ-B2-T
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 5 PPM/YEAR; Frequency Stability: 50 %; Maximum Operating Temperature: 70 Cel;
ABM3B-12.000MHZ-22-D-3-W-T
ABM3B-12.000MHZ-22-D-3-W-T by Abracon is a 12 MHz crystal oscillator with 25 ppm frequency tolerance and 25% stability. Ideal for applications requiring precise timing in temperature range of -40 to 85 °C, such as communication devices and industrial equipment.
ABM3-8.000MHZ-B4Y-T
ABM3-8.000MHZ-B4Y-T by Abracon is a 8 MHz Crystal Oscillator with 30 ppm Frequency Tolerance and 140 ohm Series Resistance. Ideal for applications requiring precise timing in temperature range of -20 to 70 °C, such as telecommunications equipment and industrial automation systems.
ABM3B-25.000MHZ-10-1-U-T
ABM3B-25.000MHZ-10-1-U-T by Abracon is a crystal oscillator with 25MHz frequency, 10ppm tolerance, and 10% stability. Ideal for applications requiring precise timing in electronics due to its high accuracy and low aging rate of 5PPM/yr.
ABM3-18.432MHZ-B-2-T
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 5 PPM/FIRST YEAR; Series Resistance: 50 ohm; Manufacturer Series: ABM3;
ABM3B-18.432MHZ-B-2-T
PARALLEL - 3RD OVERTONE; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 5 PPM/FIRST YEAR; Frequency Stability: 50 %; Load Capacitance: 18 pF;
ABM3-13.560MHZ-B2-T
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 5 PPM/YEAR; Minimum Operating Temperature: -20 Cel; Drive Level: 10 uW;
ABM3-24.000MHZ-D2Y-T
ABM3-24.000MHZ-D2Y-T by Abracon is a 24 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, it operates b/w -40 to 85 °C and features a parallel fundamental crystal type.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved