Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ABLS-10.000MHZ-B-2-T by Abracon is a 10 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, such as telecommunications equipment or industrial automation systems. Operating temperature range from -20°C to 70°C makes it versatile for various environments.
Median Price
$0.130
Lifecycle Status
Suppliers In-Stock
31
In-Stock Inventory
1k+
Newark
1+ parts
$0.127
100+ parts
-
1k+ parts
10k+ parts
DigiKey
$0.220
$0.166
$0.150
Mouser Electronics
$0.143
Adafruit Industries
$186.225
$169.465
$152.704
Master Electronics
$0.133
$0.117
PEI Genesis
Verical
$0.188
$0.113
Arrow
$0.108
Future Electronics
$0.123
TTI Europe
$0.125
$0.118
TTI
$0.111
$0.102
Element14
$0.209
Chip1Stop
$0.121
Nova Conductors
$0.192
Component Electronics Inc.
$0.770
$0.580
$0.500
Rapid Electronics
$0.217
TME
$0.224
$0.134
Vyrian
Electro Sonic
$0.112
$0.109
Bristol Electronics
NAC Semi
$0.182
$0.168
Atlantic Semiconductor
Inventory MP
PC Components Company LLC
Semi Source
IBS Electronics
$0.153
$0.147
VNN
Sensible Micro Corp
LIBRA Elektronik GmbH
LWI Electronics Inc
Prism Electronics
Ampacity Inc.
$0.092
Semicontronic
$0.090
$0.089
Continental Prestige Electronics
$0.176
$0.172
Argo Parts USA
$0.171
Aranea Global
$0.181
Aztec Data Supply Inc.
$0.315
Corohmni
$1.075
Perfect Parts
Glotronic Ltd.
Authorized Procurement Solutions
This tight frequency tolerance ensures accurate and reliable performance, making this crystal oscillator suitable for precision applications.
The high frequency stability of 50% ensures consistent performance even under varying environmental conditions, making it a reliable choice for use in different settings.
The low series resistance of 50 ohm helps in efficient power consumption and optimal signal integrity, making it a cost-effective and high-performing option.
With a minimum operating temperature of -20°C, this crystal oscillator can function reliably in a wide range of environments, providing flexibility in usage.
The matte tin terminal finish offers good solderability and corrosion resistance, enhancing the overall durability and lifespan of the product.
The parallel-fundamental crystal or resonator type ensures stable and consistent frequency output, making it suitable for applications requiring precise timing.
The 10 MHz operating frequency is ideal for a wide range of applications, providing a balance between speed and accuracy.
The low aging rate of 5 PPM per year ensures long-term stability and reliability, making this crystal oscillator a durable choice for extended use.
The 18 pF load capacitance helps in maintaining stable oscillations and efficient signal transmission, ensuring optimal performance in various circuits.
The surface mounting feature allows for easy and secure installation on PCBs, saving space and simplifying the assembly process.
The low drive level of 100 uW helps in efficient power consumption, while ensuring reliable and consistent signal output.
The compact size of 11.4mm x 4.7mm x 4.2mm makes this crystal oscillator suitable for applications where space is limited, without compromising on performance.
With a maximum operating temperature of 70°C, this crystal oscillator can withstand higher temperature environments, ensuring reliable performance in demanding conditions.
Crystal Oscillators ABLS-10.000MHZ-B-2-T attributes and parameters. Explore more Crystal Oscillators devices from Abracon
Additional Features:
Aging:
Crystal or Resonator Type:
Drive Level:
Frequency Stability:
Frequency Tolerance:
JESD-609 Code:
Load Capacitance:
Mounting Feature:
Nominal Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Physical Dimension:
Series Resistance:
Terminal Finish:
ABLS-10.000MHZ-B-2-T Crystals & Resonators trade compliance attributes, and parameters.
HTS
8541.60.00.50
SB
8541.60.00.25
Abracon is a trusted supplier of leading-edge and innovative electronic components including Frequency Control, Timing, Power, Magnetics, RF and Antenna solutions. Servicing world-class companies across the data communication, transportation, industrial, medical, consumer, aerospace, and defense industries, Abracon accelerates customers’ time-to-market by providing unmatched product solutions, technical expertise, and service excellence.
2N7002
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
1N4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358AN
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
EU2B-YS303C
Idec
ROTARY SWITCH;
National Semiconductor
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
LL4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Pulse Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Dc Components
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
BAV99
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
STM32H753IIK6
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
General Instrument
ECS-.327-7-12-TR
Ecs International
ECS-0.327-7-12-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 90000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as telecommunications and industrial automation. Features gold terminal finish, surface mounting, and operates b/w -40 to 85 °C.
ABM11W-16.0000MHZ-8-K1Z-T3
Abracon
ABM11W-16.0000MHZ-8-K1Z-T3 by Abracon is a 16 MHz crystal oscillator with 10 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w -40°C to 125°C and features a compact surface-mount design.
TSX-322525.0000MF10P-C0
Seiko Epson
TSX-322525.0000MF10P-C0 by Seiko Epson is a 25 MHz crystal oscillator with 10 ppm frequency tolerance and 10% stability. Ideal for applications requiring precise timing in electronics, telecommunications, and industrial automation due to its compact size and high reliability.
ABM13W-80.0000MHZ-6-B2Y-T5
ABM13W-80.0000MHZ-6-B2Y-T5 by Abracon is a 80 MHz Crystal Oscillator with 20 ppm Frequency Tolerance and 30% Stability. Ideal for applications requiring precise timing in temperature range of -20 to 70 °C, such as IoT devices and communication systems.
ABM3B-14.31818MHZ-B-2-T
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 5 PPM/FIRST YEAR; Physical Dimension: L5.0XB3.2XH1.1 (mm)/L0.197XB0.126XH0.043 (inch); Nominal Operating Frequency: 14.31818 MHz;
NX3225GD-8.000M-STD-CRA-3
Nihon Dempa Kogyo
NX3225GD-8.000M-STD-CRA-3 by Nihon Dempa Kogyo is a crystal oscillator with 8 MHz frequency, 50 ppm tolerance, and 150% stability. Ideal for applications requiring precise timing in temperature ranges from -40 to 150 °C, it features gold terminal finish and surface mounting.
XRCGB25M000F3M00R0
Murata Manufacturing
Murata Manufacturing's XRCGB25M000F3M00R0 crystal oscillator operates at 25 MHz with a frequency tolerance of 30 ppm and stability of 40%. Suitable for surface mount applications, it has a series resistance of 150 ohm and load capacitance of 6 pF.
ABM8G-25.000MHZ-B-4-Y-T
ABM8G-25.000MHZ-B-4-Y-T by Abracon is a 25 MHz crystal oscillator with 30 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing in temperature range of -20 to 70 °C, such as telecommunications equipment and industrial automation systems.
445I32J25M00000
Cts
Cts 445I32J25M00000 crystal oscillator offers 30 ppm frequency tolerance, 20% stability, and 40 ohm series resistance. Ideal for applications requiring a parallel-fundamental resonator with a nominal frequency of 25 MHz. Operating range from -40 to 85 °C, suitable for surface mount installations.
ABLS2-12.000MHZ-D4Y-T
ABLS2-12.000MHZ-D4Y-T by Abracon is a 12 MHz crystal oscillator with 30 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, it operates b/w -40 to 85 °C and features a parallel-fundamental crystal type in a compact surface mount design.
ABM3B-16.000MHZ-D-1-X-T
ABM3B-16.000MHZ-D-1-X-T by Abracon is a 16 MHz crystal oscillator with 10 ppm frequency tolerance and 20% stability. Ideal for applications requiring precise timing, it operates b/w -40 to 85 °C, featuring nickel/gold terminal finish and parallel-fundamental crystal type.
402F25011CJR
Cts 402F25011CJR crystal oscillator offers 10 ppm frequency tolerance and 10% stability. With a parallel fundamental type, it operates at 25 MHz ideal for applications requiring precise timing like telecommunications and networking. Featuring a compact size of 2mm x 1.6mm x 0.55mm, it is suitable for surface mount installations in various electronic devices.
ABLS-4.9152MHZ-B-2-T
ABLS-4.9152MHZ-B-2-T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 50% stability, and 180 ohm series resistance. Ideal for applications requiring precise timing at 4.9152 MHz, such as telecommunications equipment or industrial automation systems. Operating temperature range from -20 to 70 °C with compact surface mount design.
ABS05W-32.768KHZ-K-2-T
Abracon's ABS05W-32.768KHZ-K-2-T crystal oscillator offers 20 ppm frequency tolerance, 400% stability, and 65000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency with -40 to 125 °C operating range.
ABS07-32.768KHZ-9-4-T
Abracon's ABS07-32.768KHZ-9-4-T crystal oscillator offers 30 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at a frequency of 0.032768 MHz in environments ranging from -40 to 85 °C.
ABLS-LR-12.000MHZ-T
ABLS-LR-12.000MHZ-T by Abracon is a 12 MHz crystal oscillator with 50 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w 0-70°C with a low drive level of 100 uW.
MC-14632.7680KA-AG0:PURESN
Seiko Epson's MC-14632.7680KA-AG0:PURESN crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 65000 ohm series resistance. Ideal for applications requiring a 0.032768 MHz nominal operating frequency, such as surface mount devices in temperature-sensitive environments with -40 to 85 °C range.
R1612-25.000-9-F-1010-TR
Raltron Electronics
Raltron Electronics' R1612-25.000-9-F-1010-TR is a crystal oscillator with 10 ppm frequency tolerance and 10% stability, suitable for applications requiring precise timing. With a series resistance of 150 ohm, it operates at frequencies up to 25 MHz and features a parallel fundamental crystal type. Ideal for surface mount setups, this component has a compact size of 1.6mm x 1.25mm x 0.32mm and can withstand temperatures from -10°C to 60°C.
HC49SM-20-30-50-60-16-ATF
Multicomp Pro
HC49SM-20-30-50-60-16-ATF by Multicomp Pro is a crystal oscillator with 30 ppm frequency tolerance, 50% stability, and 16 pF load capacitance. Ideal for applications requiring precise timing at -10 to 60 °C, such as telecommunications and industrial automation.
9HT10-32.768KEZF-T
Txc
9HT10-32.768KEZF-T by Txc is a crystal oscillator with 10 ppm frequency tolerance and 108% stability, suitable for applications requiring precise timing. Operating at 0.032768 MHz, it features a parallel fundamental type and aging of 3 PPM/first year. With surface mounting feature, it operates b/w -40°C to 85°C temperature range.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ABLS-12.000MHZ-B-2-T
ABLS-12.000MHZ-B-2-T by Abracon is a crystal oscillator with a frequency tolerance of 20 ppm and stability of 50%. It is commonly used in applications requiring a nominal operating frequency of 12 MHz, such as communication systems and electronic devices.
ABLS-25.000MHZ-B-2-F-T
ABLS-25.000MHZ-B-2-F-T by Abracon is a 25 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w -20 to 70 °C and features a parallel resonator type with matte tin finish.
ABLS-8.000MHZ-B-2-T
ABLS-8.000MHZ-B-2-T by Abracon is an 8MHz crystal oscillator with 20ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w -20°C to 70°C with a drive level of 100uW.
ABLS2-25.000MHZ-D4Y-F-T
ABLS2-25.000MHZ-D4Y-F-T by Abracon is a 25 MHz crystal oscillator with 30 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing in temperature range of -40 to 85 °C, such as telecommunications equipment and industrial automation systems.
ABLS-19.6608MHZ-B-2-T
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 5 PPM/FIRST YEAR; Minimum Operating Temperature: -20 Cel; Physical Dimension: L11.4XB4.7XH4.2 (mm)/L0.449XB0.185XH0.165 (inch);
ABLS-18.432MHZ-B-2-T
ABLS-18.432MHZ-B-2-T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 50% stability, and 40 ohm series resistance. Ideal for applications requiring precise timing at 18.432 MHz, such as telecommunications equipment or industrial automation systems. Operating temperature ranges from -20 to 70°C make it versatile for various environments.
ABLS-12.000MHZ-B-4-T
ABLS-12.000MHZ-B-4-T by Abracon is a 12 MHz crystal oscillator with 30 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w -20°C to 70°C and features a parallel-fundamental crystal type.
ABLS2-8.000MHZ-D4Y-T
CRYSTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 5 PPM/FIRST YEAR; Series Resistance: 80 ohm; Maximum Operating Temperature: 85 Cel;
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 5 PPM/FIRST YEAR; Maximum Operating Temperature: 85 Cel; Physical Dimension: L11.4XB4.7XH3.3 (mm)/L0.449XB0.185XH0.13 (inch);
ABLS-7.3728MHZ-B-2-T
ABLS-7.3728MHZ-B-2-T by Abracon is a 7.3728 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w -20 to 70 °C, featuring a parallel fundamental type and matte tin finish for surface mount installation.
ABLS-8.000MHZ-B-4-T
ABLS-8.000MHZ-B-4-T by Abracon is an 8 MHz crystal oscillator with 30 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w -20°C to 70°C, featuring a parallel-fundamental crystal type and surface mounting feature.
ABLS-12.288MHZ-B-2-T
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 5 PPM/FIRST YEAR; Nominal Operating Frequency: 12.288 MHz; Physical Dimension: L11.4XB4.7XH4.2 (mm)/L0.449XB0.185XH0.165 (inch);
ABLS-14.7456MHZ-B-2-T
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 5 PPM/FIRST YEAR; Nominal Operating Frequency: 14.7456 MHz; Maximum Operating Temperature: 70 Cel;
ABLS-24.576MHZ-B-2-F-T
PARALLEL - 3RD OVERTONE; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 5 PPM/FIRST YEAR; Minimum Operating Temperature: -20 Cel; Drive Level: 100 uW;
ABLS-49.152MHZ-B-2-T
PARALLEL - 3RD OVERTONE; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 5 PPM/FIRST YEAR; Additional Features: AT-CUT; JESD-609 Code: e3;
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 5 PPM/FIRST YEAR; Terminal Finish: MATTE TIN; Load Capacitance: 18 pF;
ABLS-25.000MHZ-B-4-F-T
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 5 PPM/FIRST YEAR; Frequency Stability: 50 %; Minimum Operating Temperature: -20 Cel;
ABLS-48.000MHZ-B-2-T
PARALLEL - 3RD OVERTONE; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 5 PPM/FIRST YEAR; Maximum Operating Temperature: 70 Cel; Physical Dimension: L11.4XB4.7XH4.2 (mm)/L0.449XB0.185XH0.165 (inch);
ABLS-4.000MHZ-B-2-T
ABLS-4.000MHZ-B-2-T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 50% stability, and 180 ohm series resistance. Ideal for applications requiring a 4 MHz nominal operating frequency, such as IoT devices or communication systems.
ABLS-10.000MHZ-8-B-3-G
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 25 ppm; Aging: 5 PPM/FIRST YEAR; Minimum Operating Temperature: -20 Cel; Drive Level: 100 uW;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved