Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
WIRE AND CABLE;
Median Price
$40.500
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
< 1k
DigiKey
1+ parts
$1.810
100+ parts
$0.946
1k+ parts
-
10k+ parts
Mouser Electronics
$79.190
$61.950
Nova Conductors
$65.020
Vyrian
Ampacity Inc.
$0.760
AZTECH Wire
$6.570
Continental Prestige Electronics
$63.720
Argo Parts USA
Netroflash
$61.769
$60.469
Electrical Wires & Cables C3365/26100 attributes and parameters. Explore more Electrical Wires & Cables devices from 3m Electronic Products Division
Connector Accessory Type:
With over 60,000 products in our portfolio, 3M brands deliver science-based performance and extraordinary outcomes across almost any industry you can imagine.
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
L7805CV
STMicroelectronics
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
1N4148
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MBRA340T3G
Onsemi
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
BAV99WT1G
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
SMBJ18CA
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
National Semiconductor
ULN2803ADW
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
MMBT3906LT1G
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
Secos
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
International Semiconductor
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
44A0111-22-9
TE Connectivity
TE Connectivity's 44A0111-22-9 cable is a stranded wire with 600V rating, TIN finish, and 22 AWG size. Ideal for general purpose applications, it has a temperature range of -65 to 150°C. This flexible cord and fixture wire features copper alloy conductor material in a lightweight construction.
P569-003
Tripp Lite
CABLE ASSEMBLY;
RPCU-G-00.25-AMS-AM
Samtec
Wires and Cables;
CO-174SMAZBNC-000.6
Amphenol
135101-04-M1.00
3365/10-100SF
3m Electronic Products Division
3m Electronic Products Division's 3365/10-100SF is a FLAT FLEXIBLE CABLE with 7 STRANDED conductors, TIN finish, and UL/CUL approvals. Rated at 300V, it has a wire gauge of 28 AWG and length of 30.48mm. Ideal for electrical applications requiring flexibility and durability.
U038-003
3051BK005
Alpha Wire
3051BK005 by Alpha Wire is a CSA/UL approved stranded wire with 300V rating. Featuring tin finish, PVC insulation, and copper alloy conductor, it operates b/w -40 to 105 °C. Ideal for flexible cords and fixtures due to its 22 AWG gauge and 0.326 mm2 cross-section area.
97946061000
Belden
6010CSL001
Alpha Wire 6010CSL001 is a 300V stranded cable with PVC jacket, shielding, and tin finish. Suitable for communication/control applications, it has 6 conductors of copper alloy, rated from -20 to 75°C, with resistance of 0.054 ohm over a length of 304.8mm.
DCPLUG-P1J-R7B
Mean Well Enterprises
15812
Helukabel
Helukabel 15812 is a stranded electrical wire with PVC insulation, rated for 450V. It has a cross-sectional area of 2.5mm2 and can withstand temperatures from -15°C to 80°C. Ideal for switch cabinet construction and measurement set-ups in labs.
PMHDMF-0.5
L-com
U050-006
CABLE ASSEMBLY; Connector Side-1: USB 2.0 A MALE; Connector Side-2: MICRO USB B MALE; Shielding: NO; IEC Conformity: NO; DIN Conformity: NO;
3-1437356-0
3-1437356-0 by TE Connectivity is a 28 AWG stranded flat cable with PVC jacket, UL approval, and tin finish. It has 10 conductors, rated for 300V DC voltage and 2A current. Ideal for electrical wiring applications requiring flexibility and durability in temperatures ranging from -20 to 105°C.
153660984
Molex
Molex 153660984 flat cable with UL approval, shielding, and tin finish. Rated for 60V, -40 to 105°C operating temp range. Ideal for FFC connectors in applications requiring 0.015mm2 cross section area and 0.5A rated current.
13253
Helukabel 13253 is a stranded wire with polymer jacket, rated at 600V. With approvals from BS, CUL, DIN, IEC, UL, VDE, it's ideal for fixed installations. Featuring 5 bare copper conductors and a cross-section area of 1mm2, this flexible cord has an operating temperature range of -40 to 80°C.
P564-001
FFSD-10-D-02.00-01-N
FFSD-10-D-02.00-01-N by Samtec is a stranded electrical wire with PVC insulation, UL approval, and tin conductor finish. It is designed for high reliability applications with a temperature range of -40 to 105 °C. This flat cable has 20 conductors and a cross-sectional area of 0.0509 mm2, making it suitable for various connector accessories.
982660193
Molex 982660193 flat cable with UL approval, rated for 60V, features tin finish copper alloy conductor. Suitable for applications requiring -40 to 105 °C operating temperature range, 0.03 mm2 cross section area, and 0.73 ohm resistance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
C3365/20100
C3365/10
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; No. of Conductors: 10; Wire & Cable Name: FLAT FLEXIBLE CABLE; Stranding: 7X36;
C3365/15SF
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Wire Gauge (AWG): 28; Stranding: 7X36; Construction: STRANDED;
C3365/20
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Maximum Operating Temperature: 105 Cel; Wire Gauge (AWG): 28; No. of Conductors: 20;
C3365/26
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; No. of Conductors: 26; Conductor Material: TINNED COPPER; Approvals (V): CUL, UL;
C3365/14100
C3365/16
C3365/16 by 3M Electronic Products Division is a flat flexible cable with 16 conductors, rated for 300V. Featuring tinned copper conductors and PVC insulation, it operates b/w -20°C to 105°C. Approved by CUL and UL, it is ideal for electrical wiring applications requiring flexibility and durability.
C3365/15SF100
C3365/15300
C3365/15SF300
C3365/14
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Stranding: 7X36; Maximum Operating Temperature: 105 Cel; No. of Conductors: 14;
C3365/50
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Maximum Operating Temperature: 105 Cel; No. of Conductors: 50; Conductor Material: TINNED COPPER;
C3365/50SF300
C3365/06
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Minimum Operating Temperature: -20 Cel; No. of Conductors: 6; Wire Gauge (AWG): 28;
C3365/08100
C3365/09
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Insulator Material: POLYVINYL CHLORIDE; No. of Conductors: 9; Wire Gauge (AWG): 28;
C3365/09100
C3365/26300
C3365/26SF100
C3365/26SF300
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved