Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
3m Electronic Products Division's 3749/16 flat cable features 16 copper conductors with tin finish, rated for 150V. With solid construction and THERMOPLASTIC ELASTOMER insulation, it operates b/w -40 to 105 °C. Ideal for electrical applications requiring a reliable and flexible wire solution.
Median Price
$73.340
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Farnell
1+ parts
$64.500
100+ parts
-
1k+ parts
10k+ parts
Newark
$68.440
$56.020
Element14
Mouser Electronics
$83.870
$47.510
DigiKey
$111.010
Nova Conductors
$53.260
VNN
Vyrian
Electronic Expediters
Semicontronic
$1.420
$1.384
$1.377
Ampacity Inc.
Aztec Data Supply Inc.
$7.470
AZTECH Wire
$12.451
Corohmni
$50.310
Netroflash
$52.195
Advanced Electronics
$54.325
Continental Prestige Electronics
$58.040
Argo Parts USA
Perfect Parts
Having CUL and UL approvals ensures that the product meets safety and quality standards, giving peace of mind to the user.
Solid construction provides durability and reliability, making the cable suitable for long-term use.
Suitable for a wide range of applications that require a voltage rating of up to 150 volts.
Thermoplastic elastomer insulation offers good flexibility, resistance to heat, and durability, providing reliable protection for the conductors.
With a high maximum operating temperature, the cable can withstand heat without degradation, ensuring performance under various conditions.
The cable remains flexible and functional even in cold environments, offering versatility in installation and use.
Copper conductors provide excellent conductivity and corrosion resistance, ensuring efficient transmission of electrical signals.
Flat cable design allows for easy installation in tight spaces and neat cable management, making it a practical choice for various applications.
Electrical Wires & Cables 3749/16 attributes and parameters. Explore more Electrical Wires & Cables devices from 3m Electronic Products Division
Approvals (V):
Conductor Finish:
Conductor Material:
Connector Accessory Type:
Construction:
Cross Section Area:
DIN Conformity:
Diameter:
IEC Conformity:
Insulator Material:
Length:
MIL Conformity:
No. of Conductors:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Voltage:
Shielding:
Stranding:
Wire Gauge (AWG):
Wire & Cable Name:
With over 60,000 products in our portfolio, 3M brands deliver science-based performance and extraordinary outcomes across almost any industry you can imagine.
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
1N4148
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
SS14
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
LM107H
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Brightking
Onsemi
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
3021001-03
Qualtek Electronics
3021001-03 by Qualtek Electronics is a UL approved shielded cable assembly with 28 AWG wire gauge, 4mm diameter, and USB-A MALE to USB-B MALE connectors. It has 3 ohm resistance and 4 conductors. Ideal for electrical connections requiring reliable data transfer in various applications.
AA59569R36T0500
Allied Wire & Cable
WIRE AND CABLE;
P568-016
Tripp Lite
CABLE ASSEMBLY;
135101-01-M0.75
Amphenol
M22759/11-26-9
Carlisle Interconnect Technologies
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Stranding: 19X38; Conductor Finish: SILVER; Construction: STRANDED;
3365/06-300SF
3m Electronic Products Division
3m Electronic Products Division's 3365/06-300SF is a FLAT FLEXIBLE CABLE with 7 STRANDED conductors, TIN finish, and UL/CUL approvals. Rated at 300V, AWG 28 gauge, it's ideal for electrical applications requiring flexibility in confined spaces.
15022
Helukabel
Helukabel 15022 is a CE, EAC, IPA, VDE approved control cable with PVC jacket and insulation. Featuring stranded construction, it has 5 bare copper conductors with 0.75 mm2 cross-section area. Ideal for flexible use in medium mechanical stresses at temperatures ranging from -40 to 80 °C.
C3365/26
C3365/26 by 3M EPD is a UL/CUL approved flat flexible cable with 26 conductors of 28 AWG tinned copper. Featuring PVC insulation, it operates b/w -20°C to 105°C, making it ideal for electrical wiring applications requiring flexibility and durability.
CC174RP-15
Infinite Electronics International
M17/94-RG179
Axon Cable Sas
WIRE AND CABLE; Rated Voltage: 1200 V; Shielding: YES; IEC Conformity: NO; Wire & Cable Name: COMMUNICATION CABLE; Stranding: 7X0.004;
1110145000
Molex
Molex 1110145000 cable is shielded with 5 conductors, USB MINI-B PLUG connectors on both sides. Operating temp: -40 to 85°C. Length: 430.7mm. Ideal for electrical connections in various applications.
RJ45-ECS-6-NR
TE Connectivity
TE Connectivity's RJ45-ECS-6-NR is a UL-approved shielded communication cable with a temperature range of -40 to 85°C. Ideal for wireless and video surveillance equipment, it ensures reliable connectivity in indoor settings.
TTL-232R-3V3-WE
FTDI
The FTDI TTL-232R-3V3-WE cable assembly has 6 conductors, USB to UART connectors, and operates b/w -40°C to 85°C. It is ideal for instrumentation and control applications due to its CE and UL approvals. With a wire gauge of 24 AWG, diameter of 5mm, and length of 1.8m, it offers reliable connectivity in various setups.
HDAMFLOC
3365/16-100SF
3M 3365/16-100SF is a FLAT FLEXIBLE CABLE with 7 STRANDED conductors, TIN finish, and UL/CUL approvals. Rated for 300V, AWG 28 gauge, it's ideal for electrical wiring in compact spaces like electronics or appliances.
PYO2SATA
Startech.com
PYO2SATA by Startech.com is a PVC jacketed power cable with SATA POWER connector on one side and 2XSATA POWER connectors on the other. It operates b/w 20-80 °C, ideal for adding more power connectors to a power supply in electrical applications. Perfect for expanding power capabilities efficiently.
687840003
CABLE ASSEMBLY; Connector Side-1: USB A PLUG; Connector Side-2: MICRO USB B PLUG; Wire Gauge (AWG): 28;
M22759/32-20-9
Defense Logistics Agency
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Conductor Finish: TIN; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE; Approvals (V): MIL-W-22759;
430450400
Habia Cable Ab
Habia Cable Ab's 430450400 is a MIL-approved stranded wire with tin finish, HFI140 insulation, and copper conductor. It operates b/w -30 to 120 °C and has a cross section area of 4 mm2. Ideal for SEAGUARD, DEFENCE, HABIATRON, and RAILGUARD applications.
44A0111-22-2
TE Connectivity's 44A0111-22-2 wire is stranded with tin finish, rated for 600V. With a conductor made of copper alloy, it has a diameter of 1.19mm and operates b/w -65 to 150°C. Ideal for general purpose applications, this flexible cord and fixture wire is lightweight and has a cross-sectional area of 0.38 mm².
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3749/34
WIRE AND CABLE; Rated Voltage: 150 V; Shielding: NO; Wire & Cable Name: FLAT CABLE; Wire Gauge (AWG): 30; Maximum Operating Temperature: 105 Cel;
3749/100
WIRE AND CABLE; Rated Voltage: 150 V; Shielding: NO; Diameter: .64 mm; Maximum Operating Temperature: 105 Cel; Conductor Material: COPPER;
3749/10
WIRE AND CABLE; Rated Voltage: 150 V; Shielding: NO; Conductor Finish: TIN; Construction: SOLID; Diameter: .64 mm;
3749/20
WIRE AND CABLE; Rated Voltage: 150 V; Shielding: NO; IEC Conformity: NO; Stranding: 1X30; Diameter: .64 mm;
3749/26
WIRE AND CABLE; Rated Voltage: 150 V; Shielding: NO; Minimum Operating Temperature: -40 Cel; Stranding: 1X30; Conductor Material: COPPER;
3749/60
WIRE AND CABLE; Rated Voltage: 150 V; Shielding: NO; Insulator Material: THERMOPLASTIC ELASTOMER; Construction: SOLID; Maximum Operating Temperature: 105 Cel;
3749/80
WIRE AND CABLE; Rated Voltage: 150 V; Shielding: NO; Wire & Cable Name: FLAT CABLE; IEC Conformity: NO; Length: 30.48 mm;
3749/100SF
WIRE AND CABLE; Rated Voltage: 150 V; Shielding: NO; MIL Conformity: NO; Conductor Finish: TIN; Wire Gauge (AWG): 30;
3749/10SF
WIRE AND CABLE; Rated Voltage: 150 V; Shielding: NO; Maximum Operating Temperature: 105 Cel; Wire & Cable Name: FLAT CABLE; Conductor Material: COPPER;
3749/12SF
WIRE AND CABLE; Rated Voltage: 150 V; Shielding: NO; Cross Section Area: .05 mm2; Insulator Material: THERMOPLASTIC ELASTOMER; Approvals (V): CUL; UL;
3749/12
WIRE AND CABLE; Rated Voltage: 150 V; Shielding: NO; Minimum Operating Temperature: -40 Cel; No. of Conductors: 12; DIN Conformity: NO;
3749/14SF
WIRE AND CABLE; Rated Voltage: 150 V; Shielding: NO; IEC Conformity: NO; Diameter: .64 mm; Conductor Material: COPPER;
3749/14
WIRE AND CABLE; Rated Voltage: 150 V; Shielding: NO; Wire Gauge (AWG): 30; Cross Section Area: .05 mm2; Length: 30.48 mm;
3749/16SF
WIRE AND CABLE; Rated Voltage: 150 V; Shielding: NO; Minimum Operating Temperature: -40 Cel; Construction: SOLID; Insulator Material: THERMOPLASTIC ELASTOMER;
3749/20SF
WIRE AND CABLE; Rated Voltage: 150 V; Shielding: NO; Minimum Operating Temperature: -40 Cel; Wire Gauge (AWG): 30; IEC Conformity: NO;
3749/30SF
WIRE AND CABLE; Rated Voltage: 150 V; Shielding: NO; Conductor Finish: TIN; Insulator Material: THERMOPLASTIC ELASTOMER; Conductor Material: COPPER;
3749/36SF
WIRE AND CABLE; Rated Voltage: 150 V; Shielding: NO; Conductor Material: COPPER; Length: 30.48 mm; Diameter: .64 mm;
3749/40SF
WIRE AND CABLE; Rated Voltage: 150 V; Shielding: NO; Conductor Finish: TIN; Minimum Operating Temperature: -40 Cel; Diameter: .64 mm;
3749/68SF
WIRE AND CABLE; Rated Voltage: 150 V; Shielding: NO; Diameter: .64 mm; No. of Conductors: 68; Length: 30.48 mm;
3749/80SF
WIRE AND CABLE; Rated Voltage: 150 V; Shielding: NO; Stranding: 1X30; Maximum Operating Temperature: 105 Cel; DIN Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved