Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
G23AH
Nkk Switches
G23AH toggle switch by Nkk Switches features DPDT switch function, 50000 cycles electrical life, and 0.4VA@28VDC DC max power rating. Made of glass-filled reinforced nylon, it is ideal for applications requiring ON-OFF-ON contact function in temperatures ranging from -25°C to 70°C.
28 deg
.15 inch
GLASS FILLED POLYAMIDE
TOGGLE BAT
4.9022 inch
14.224 mm
7.0104 mm
.157 inch
.063 inch
UNTHREADED
PHOSPHOR BRONZE
GOLD OVER NICKEL
0.4VA@28VDC
ON-OFF-ON
80 mohm
500VAC
50000 Cycle(s)
GLASS FILLED REINFORCED NYLON
500000000 ohm
e4
THROUGH HOLE-RIGHT ANGLE
70 Cel
-25 Cel
8
EPOXY
WAVE
HORIZONTAL
DPDT
TOGGLE SWITCH
GOLD
.122 inch
SOLDER
SOLVENT
7103MD9AW4PE
C & K Components
7103MD9AW4PE by C & K Components is a SPDT toggle switch with gold over nickel plating, suitable for ON-OFF-ON contact function. Featuring a stainless steel housing and copper alloy terminals, it offers an electrical life of 100000 cycles. Ideal for applications requiring a durable toggle switch with a sealing of epoxy and operating temperatures ranging from -30 to 85°C.
25 deg
CHROME
BRIGHT CHROME
.2 inch
BRASS
TOGGLE
6.858 inch
12.7 mm
.35 inch
1/4-40
COPPER ALLOY
0.4VA@20VDC
10 mohm
1000VRMS
100000 Cycle(s)
STAINLESS STEEL
1000000000 ohm
e3
85 Cel
-30 Cel
5
MIL-STD
SPDT
Matte Tin (Sn) - with Nickel (Ni) barrier
.83 inch
WIRE WRAP
A121K12KZQ
Electro Switch
A121K12KZQ by Electro Switch is a SPDT toggle switch with stainless steel housing and brass terminals. It has an electrical life of 60000 cycles, insulation resistance of 1000000000 ohms, and can handle up to 3A@250VAC. Ideal for applications requiring a durable locking lever actuated switch with ON-OFF-ON contact function.
.66 inch
LOCKING LEVER
6.604 inch
8.89 mm
.437 inch
COIN SILVER
3A@250VAC
3 A
6 A
6A@28VDC
250 V
28 V
1400VAC
60000 Cycle(s)
DIALLYL PHTHALATE
A
PANEL MOUNT
.156 inch
SOLDER LUG
2FC53-78/TABS/2HEX
Carling Technologies
Carling Technologies' 2FC53-78/TABS/2HEX is a SPDT toggle switch with an electrical life of 50,000 cycles. It has a max AC contact current of 10A and insulation resistance of 100MΩ. This toggle switch is commonly used for panel mounting applications requiring ON-OFF-ON functionality.
NICKEL
.687 inch
16.1036 inch
17.018 mm
28.8036 mm
.469 inch
.465 inch
15/32-32
0.75HP@250VAC
10A@250VAC
10 A
100000000 ohm
PHENOLIC
F
66 Cel
-17 Cel
MAINTAINED
QUICK CONNECT
5639A
Apem Components
5639A by Apem Components is a stainless steel toggle switch with 50000 cycles electrical life. Featuring silver end contact plating, it has an insulation resistance of 1000000000 ohm and operates b/w -40 to 85 °C. Ideal for panel mounting applications, this toggle switch has a max DC contact voltage of 30V and current rating of 4A@30VDC.
24 deg
.413 inch
6.985 inch
11.9888 mm
13.1826 mm
.314 inch
SILVER
4 A
4A@30VDC
30 V
2100VAC
5000
-40 Cel
MOMENTARY
.145 inch
B13AV
B13AV toggle switch by Nkk Switches features a SPDT switch function with 50000 cycles electrical life. It has a DC max power rating of 0.4VA@28VDC and insulation resistance of 500M ohm, making it ideal for applications requiring ON-OFF-ON contact functions in temperatures ranging from -30 to 85°C.
26 deg
.394 inch
8.001 inch
16.256 mm
8.7884 mm
.236 inch
.106 inch
50 mohm
BREAK-BEFORE-MAKE
B23AH
B23AH toggle switch by Nkk Switches features DPDT switch function, 50000 cycle electrical life, and 0.4VA@28VDC DC max power rating. With gold end contact plating and glass-filled polyamide insulator material, it is ideal for applications requiring a reliable ON-OFF-ON contact function in temperatures ranging from -30 to 85 °C.
8.7884 inch
13.716 mm
M2023SS1W01
M2023SS1W01 by Nkk Switches is a DPDT toggle switch with STAINLESS STEEL housing. It has 25,000 cycles electrical life and can handle 6A@125VAC AC max rating. Ideal for applications requiring a corrosion-proof, latched switch with gold over nickel/silver terminal finish.
BAT TYPE
12.7 inch
9.4 mm
13 mm
.25 inch
6A@125VAC
6A@30VDC
125 V
1500VAC
25000 Cycle(s)
PANEL MOUNT-THREADED
-15 Cel
CORROSION PROOF; EPOXY TERMINAL SEALED
LATCHED
GOLD OVER NICKEL/SILVER
M2033LL1W01
M2033LL1W01 by Nkk Switches is a 3PDT toggle switch with STAINLESS STEEL housing. It has a max AC contact current of 3A@250VAC and an electrical life of 25,000 cycles. Ideal for applications requiring ON-OFF-ON functionality in environments with temperatures ranging from -15 to 85 °C.
.65 inch
ANTIROTATION DESIGN
17.5006 inch
41.6814 mm
13.0048 mm
.381 inch
3PDT
M2043LL1W01
M2043LL1W01 by Nkk Switches is a 4PDT toggle switch with STAINLESS STEEL housing and COPPER ALLOY terminals. With an electrical life of 25,000 cycles, it is ideal for applications requiring a durable switch such as industrial machinery control panels. The switch has a max AC contact current of 3A@250VAC and operates within a temperature range of -15 to 85 °C.
22.3012 inch
4PDT
1825139-1
TE Connectivity
TE Connectivity's 1825139-1 is a DPDT toggle switch with 5A max AC/DC contact current, 28V DC contact voltage, and 125V AC contact voltage. With EPOXY TERMINAL SEALING, it has an insulation resistance of 1Gohm and operates in ON-OFF-ON function. Ideal for PANEL MOUNT applications requiring reliable COPPER ALLOY contacts and SILVER plating on the center contact.
.28 inch
5 A
1000
EPOXY TERMINAL SEALED
WIRE
1825139-4
TE Connectivity's 1825139-4 Toggle Switch features DPDT switch function, 5A max AC/DC contact current, and Epoxy Terminal Sealing. With a length of 0.35", it is ideal for panel mounting applications requiring ON-OFF-ON contact function.
1825139-9
TE Connectivity's 1825139-9 Toggle Switch features DPDT switch function, 5A max AC/DC contact current, and Epoxy Terminal Sealing. Ideal for applications requiring ON-OFF-ON contact function, with a panel mount feature and solder termination type.
2-1825142-5
TE Connectivity 2-1825142-5 Toggle Switch offers SPDT function with 6000 cycles electrical life. With EPOXY TERMINAL SEALING, it has insulation resistance of 1G ohm. Ideal for applications requiring ON-OFF-ON contact function, this switch operates at temperatures from -30°C to 85°C.
LEVER
6.6 inch
.02A@20VAC
.4 A
.02A@20VDC
20 V
6000 Cycle(s)
Gold (Au) - with Nickel (Ni) barrier
3-1825142-1
TE Connectivity 3-1825142-1 is a SPDT toggle switch with black nylon housing. It has an electrical life of 6000 cycles and insulation resistance of 1G ohm. Ideal for applications requiring ON-OFF-ON contact function, with max AC voltage of 125V and DC current of 5A.
BLACK
.5 inch
UL
10.39 mm
.24 inch
COPPER
5A@120VAC
5A@28VDC
GOLD OVER SILVER
NYLON
3
1825219-6
TE Connectivity's 1825219-6 is a SPDT toggle switch with an insulation resistance of 1GΩ and epoxy terminal sealing. It has a max AC contact current of 0.4A and a max DC contact voltage of 20V. This toggle switch is commonly used for panel mounting applications requiring ON-OFF-ON functionality.
2FC53-78/TABS
Carling Technologies 2FC53-78/TABS toggle switch has SPDT function with 15A@125VAC AC contact current. With a body width of 16.1 inch and insulator material PHENOLIC, it is ideal for panel mount-threaded applications. This switch offers ON-OFF-ON contact function and operates b/w -18 to 66 °C temperatures.
NEOPRENE SEAL
16.1 inch
17.02 mm
28.8 mm
0.75HP@240VAC
15A@125VAC
15 A
1000VAC
-18 Cel
HM251-73
Carling Technologies HM251-73 Toggle Switch offers 50000 cycles electrical life, 100000000 ohm insulation resistance, and 15A@125VAC AC max rating. Ideal for applications requiring ON-OFF-ON contact function, such as panel-mounted threaded installations with a 0.469 inch bushing diameter.
27.64 inch
20.4 mm
33.22 mm
SLOW-MAKE/-BREAK
1000VDC
H
0 Cel
.422 inch
IM251-73
The Carling Technologies IM251-73 Toggle Switch offers 50000 cycles Electrical Life, 100000000 ohm Insulation Resistance, and 15A@125VAC AC Max Rating R Load. Ideal for applications requiring a 4PDT switch function, such as panel-mounted threaded installations in industrial settings.
33.22 inch
36.47 mm
I
.187 inch
AWTE1504
TE Connectivity's AWTE1504 Toggle Switch offers 1000000000 ohm Insulation Resistance, WATER PROOF Sealing, and SPDT Switch Function. Ideal for applications requiring a durable switch with 20 A AC/DC Contact Current/Voltage, BRASS End Contact Material, SILVER Center Contact Plating, and ON-OFF-ON Contact Function.
20 A
1500
WATER PROOF
4NT1-1
Honeywell Sensing And Control
4NT1-1 by Honeywell Sensing And Control is a 4PDT toggle switch with IP67/IP68 sealing. It has a max AC contact current of 15A@277VAC and operates b/w -40 to 71°C. Ideal for applications requiring ON-OFF-ON functionality, it features SILVER ALLOY contacts and a standard lever actuator for panel mount-threaded installation.
34 deg
.68 inch
STANDARD LEVER
UL, CSA CERTIFIED
33.4 inch
34.4 mm
41.6 mm
.427 inch
.47 inch
SILVER ALLOY
1HP@250VAC
15A@277VAC
277 V
71 Cel
IP67; IP68
SCREW
112TW1-1A
112TW1-1A by Honeywell is a DPDT toggle switch with dimensions of 13.59" x 0.47" x 32.51mm, sealed against dust and water. It has a max AC contact current of 5A@115VAC and DC contact voltage of 28V, suitable for panel mount-threaded applications requiring ON-OFF-ON functionality.
1.16 inch
LOCKING TYPE
13.59 inch
32.51 mm
14.86 mm
.51 inch
2A@115VAC
5A@115VAC
115 V
112TW1
DUST PROOF; ENVIRONMENTALLY SEALED; WATER PROOF
112TW1-1E
112TW1-1E by Honeywell is a DPDT toggle switch with sealing for dust, water, and environmental protection. It has a max AC contact current of 5A@115VAC and DC contact voltage of 28V. Ideal for applications requiring a locking type actuator, such as panel-mounted threaded installations.
1NT1-1
1NT1-1 by Honeywell Sensing And Control is a SPDT toggle switch with sealing for dust and water proofing. It has a max AC contact current of 15A@277VAC and DC contact current of 20A@28VDC. Ideal for panel mounting applications requiring a latched ON-OFF-ON switch function in industrial settings.
31 deg
.67 inch
15.75 inch
29.46 mm
28.45 mm
20A@28VDC
DUST PROOF; WATER PROOF
1NT1-6
1NT1-6 by Honeywell Sensing And Control is a SPST toggle switch with dust and water-proof sealing. It has a max AC contact current of 10A@277VAC and DC contact current of 15A@28VDC. Ideal for applications requiring ON-OFF-ON functionality, it features a lever actuator type and panel mount-threaded mounting feature.
10A@277VAC
15A@28VDC
SPST
12TW1-1A
12TW1-1A by Honeywell Sensing And Control is a SPDT toggle switch with a body width of 13.59in and sealing for dust proofing. It has a max AC contact current of 5A@125VAC, making it suitable for applications requiring ON-OFF-ON functionality in panel mount-threaded setups.
TOGGLE LEVER
16.76 mm
14.61 mm
5A@125VAC
DUST PROOF
MTG92AD2
MTG92AD2 by Apem Components is a rugged toggle switch with IP68 sealing, suitable for panel mounting applications. It features SPDT switch function, 50000 cycles electrical life, and 1000000000 ohm insulation resistance. With gold-plated contacts and latched switch action, it can handle up to 6A@125VAC AC loads and 4A@30VDC DC loads efficiently.
.44 inch
22.225 inch
16.7 mm
20 mm
MT
BULK
EPOXY TERMINAL SEALED; IP68
1TL1-1A
1TL1-1A by Honeywell is a SPDT toggle switch with dust-proof sealing. It has a body width of 15.75", max AC contact current of 15A, and operates b/w -65 to 71°C. Ideal for applications requiring ON-OFF-ON functionality, it features a locking lever actuator and screw termination type for panel mounting.
1.05 inch
LOCKED IN THREE POSITIONS
SILVER CADMIUM OXIDE
-65 Cel
1TL1-1E
1TL1-1E by Honeywell Sensing And Control is a SPDT toggle switch with gold-plated contacts. It has a sealing rating of DUST PROOF and can handle up to 15A@125VAC. Ideal for applications requiring a latched switch function in environments with dust exposure.
1TL1-1K
1TL1-1K toggle switch by Honeywell features a locking lever actuator with SPDT switch function. It has a max AC contact current of 15A@125VAC and DC contact current of 20A@28VDC. Ideal for applications requiring dust-proof sealing, this switch is suitable for panel mount-threaded installations in various industrial settings.
1TL1-1L
1TL1-1L by Honeywell is a SPDT toggle switch with dust-proof sealing. It has a max AC contact current of 15A@125VAC and DC contact current of 20A@28VDC. Ideal for panel mounting applications, this switch features a locking lever actuator and ON-OFF-ON contact function.
LOCKED OUT OF KEYWAY SIDE
1TL1-1M
1TL1-1M by Honeywell is a SPDT toggle switch with gold-plated contacts. It has a body width of 15.75" and sealing for dust-proof protection. Ideal for applications requiring a latched switch action, it can handle up to 15A@125VAC AC max rating load contact.
1TL1-1
1TL1-1 toggle switch by Honeywell Sensing And Control features SPDT switch function, gold-plated contacts, and dust-proof sealing. With a max AC contact current of 15A@277VAC, it is ideal for applications requiring ON-OFF-ON functionality in environments with temperatures ranging from -65 to 71°C. The switch's standard lever actuator and latched switch action make it suitable for panel mount-threaded installations.
MICRO SWITCH
S333R
The Nkk Switches S333R Toggle Switch features DPDT switch function, 25A@30VDC DC max rating, and 15A@250VAC AC max rating. With a locking lever actuator type, it is ideal for panel mount applications requiring ON-OFF-ON contact function. The switch has a durable ABS actuator material and operates within -10 to 70 °C temperature range.
30 deg
1.063 inch
ACRYLONITRILE BUTADIENE STYRENE
HIGH RATED
18.9992 inch
33.1978 mm
.472 inch
M12P1
10A@125VAC
15A@250VAC
25 A
25A@30VDC
2000VAC
-10 Cel
TIN
12149A
12149A by Apem Components is a brass toggle switch with an electrical life of 50,000 cycles and insulation resistance of 1,000,000,000 ohms. It operates b/w -40°C to 85°C and has a max DC contact voltage of 30V. Ideal for panel mounting applications requiring a reliable ON-OFF-ON function with quick connect termination.
20 deg
.681 inch
13.6906 mm
.429 inch
2500VAC
.196 inch
© 2023 All rights reserved
