Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
GPB527B2L02BR1
Cw Industries
GPB527B2L02BR1 by Cw Industries is a RED LED pushbutton switch with DPST function. It has a 4.4958mm actuator travel and operates b/w -25 to 85 °C. Ideal for panel mounting applications, it offers a max AC contact current of 6A@250VAC and DC contact current of 20A@14VDC.
0 deg
RED
POLYCARBONATE
4.4958
PUSHBUTTON
14.5034 mm
19.812 mm
0.5HP@250VAC
6A@250VAC
6 A
20 A
20A@14VDC
ON-OFF
50 mohm
250 V
14 V
1500VAC
LED
100000000 ohm
GPB
PANEL MOUNT
85 Cel
-25 Cel
DPST
.354 inch
COPPER ALLOY
QUICK CONNECT
IPR3SAD7/1
Apem Components
The Apem Components IPR3SAD7/1 is a white LED pushbutton switch with 1000000 cycles electrical life. Featuring gold-plated contacts, it has an insulation resistance of 1000000000 ohm and operates b/w -40 to 85 °C. Ideal for panel mounting applications requiring momentary switch action at up to 48VAC/DC and 0.5A load rating.
WHITE
.078 inch
POLYAMIDE
1.7018
BLACK
6.3754 mm
11.9888 mm
.267 inch
SILVER
GOLD
0.5A@48VAC
.5 A
.2 A
0.2A@48VDC
100 mohm
48 V
2100VAC
1000000 Cycle(s)
1000000000 ohm
THERMOPLASTIC
IP
-40 Cel
EPOXY
MOMENTARY
.24 inch
SOLDER LUG
8636-A-K
The Apem Components 8636-A-K is a stainless steel pushbutton switch with an electrical life of 30,000 cycles. It has a max AC contact current of 3A and insulation resistance of 1G ohm. Ideal for panel mounting applications requiring ON-ON contact function and operating temperatures from -40 to 85°C.
NICKEL
.248 inch
BRASS
2.6924
6.985 inch
18.1864 mm
13.1826 mm
.25 inch
.275 inch
1/4-40
3A@250VAC
3 A
4 A
4A@30VDC
ON-ON
10 mohm
30 V
1000VRMS
30000 Cycle(s)
STAINLESS STEEL
DIALLYL PHTHALATE
8000
ALTERNATE
.145 inch
MB2511JW01
Nkk Switches
MB2511JW01 by Nkk Switches is a SPDT special function switch with a body width of 7.8994 inch and a sealing of EPOXY. It has a max AC contact current of 3A and is commonly used for panel mount applications.
.13 inch
7.8994 inch
20.3962 mm
18.0086 mm
3A@125VAC
ON-(ON)
125 V
MB25
SPDT
.177 inch
KB15RKG01
KB15RKG01 by Nkk Switches is a SPDT pushbutton switch with POLYAMIDE housing and BRASS terminals. It has an electrical life of 100,000 cycles and operates b/w -25 to 70°C. Ideal for applications requiring momentary ON-(ON) contact function with a max power rating of 0.4VA at 28VDC.
.347 inch
2.9972
11.4808 mm
.472 inch
.559 inch
M12P1
0.4VA@28VDC
BREAK-BEFORE-MAKE
750VAC
100000 Cycle(s)
KB
70 Cel
HAND
.158 inch
KB15RKW01
KB15RKW01 by Nkk Switches is a SPDT pushbutton switch with POLYAMIDE housing and BRASS terminals. It has an electrical life of 50,000 cycles and insulation resistance of 1G ohm. Ideal for panel mounting applications, it operates b/w -25 to 70°C with a max AC contact current of 1A@250VAC.
1A@250VAC
1 A
1000VAC
50000 Cycle(s)
YB15WRKG01-JC
YB15WRKG01-JC by Nkk Switches is a SPDT pushbutton switch with gold-plated contacts, rated for 100000 cycles. It features a DC power rating of 0.4VA@28VDC and insulation resistance of 200M ohm. Ideal for applications requiring momentary ON-(ON) contact function, such as panel-mounted control panels or industrial equipment.
.327 inch
18.0086 inch
9.2964 mm
24.003 mm
200000000 ohm
GLASS FILLED POLYAMIDE
YB
.288 inch
PHOSPHOR BRONZE
YB15WRKG01-JF
YB15WRKG01-JF by Nkk Switches is a SPDT pushbutton switch with gold-plated contacts. It has an electrical life of 100,000 cycles and insulation resistance of 200M ohm. Ideal for applications requiring momentary ON-(ON) contact function, such as panel mounting in electronic devices.
YB15WRKG01/C-1F24-JF
YB15WRKG01/C-1F24-JF by Nkk Switches is a SPDT pushbutton switch with 100000 cycles electrical life. Featuring gold-plated contacts, it has an insulation resistance of 200M ohm and can withstand up to 1000VAC. Ideal for applications requiring momentary ON-(ON) contact function, such as panel-mounted control panels or industrial machinery.
YB15WRKG01/C
YB15WRKG01/C by Nkk Switches is a SPDT pushbutton switch with gold-plated contacts. It has an electrical life of 100,000 cycles and insulation resistance of 200M ohm. Ideal for applications requiring momentary ON-(ON) contact function, with quick connect termination and panel mount feature.
DS1F5AQ2
C & K Components
DS1F5AQ2 by C & K Components is a SPDT pushbutton switch with gold over silver plating. It has an electrical life of 50,000 cycles and insulation resistance of 100M ohm. Ideal for panel mounting applications, it operates b/w -40 to 85°C with a max AC contact current of 0.1A at 250VAC.
21.3614 inch
13.3096 mm
22.0472 mm
SILVER ALLOY
GOLD OVER SILVER
0.1A@250VAC
.1 A
30 mohm
DS
8642A
The Apem Components 8642A is a stainless steel pushbutton switch with an electrical life of 30,000 cycles. It has an insulation resistance of 1,000,000,000 ohms and operates b/w -40°C to 85°C. Ideal for panel mounting applications requiring momentary ON-(ON) contact function at 3A/250VAC or 4A/30VDC loads.
11.9888 inch
8642AB
The Apem Components 8642AB is a stainless steel pushbutton switch with an actuator travel of 2.6924mm and ON-(ON) contact function. It has an electrical life of 30,000 cycles, insulation resistance of 1Gohm, and can handle up to 3A@250VAC. Ideal for panel mounting applications requiring momentary switch action in temperatures ranging from -40°C to 85°C.
8642AK
The Apem Components 8642AK is a stainless steel pushbutton switch with an electrical life of 30,000 cycles. It has a max AC contact current of 3A@250VAC and is ideal for panel mounting applications requiring momentary switch action.
ISR3SAD600104
ISR3SAD600104 by Apem Components is a SPST pushbutton switch with 500000 cycles electrical life and 50000000 ohm insulation resistance. It has gold plating on end and center contacts, operates b/w -40 to 85 °C, and can handle 0.4A@32VAC AC max rating R load. Ideal for panel mounting applications requiring reliable switching performance.
.185 inch
1.651
0.4A@32VAC
.4 A
0.1A@48VDC
32 V
500000 Cycle(s)
50000000 ohm
IS
SPST
924CE18-S6
Honeywell Sensing And Control
924CE18-S6 by Honeywell Sensing And Control is a SPST safety door switch with IP66/67 sealing. With a body width of 16", it has a max operating temperature of 105°C and min of 0°C. This panel mount switch, with screw termination, is ideal for applications requiring momentary switch action.
16 inch
49 mm
40 mm
105 Cel
0 Cel
IP66; IP67
SAFETY DOOR SWITCH
SCREW
924CE31-S6
SAFETY DOOR SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Body Height: 49 mm; Body Width: 16 inch; Maximum Operating Temperature: 105 Cel;
1CPSA5
1CPSA5 by Honeywell Sensing And Control is a 4PST safety door switch with IP67 sealing. It operates b/w -40 to 85°C, with a max DC contact voltage of 60V and current of 0.05A. Ideal for panel mounting applications requiring momentary switch action.
.05 A
.05A@60VDC
60 V
IP67
4PST
WIRE
D4NS-1AF
Omron
Omron's D4NS-1AF is a SPST safety door switch with IP67 sealing, suitable for panel mounting. With an electrical life of 300K cycles, it operates b/w -30°C to 70°C. Ideal for applications requiring momentary switch action in harsh environments.
CONTACT RATING FOR AC: 10 A, 250 VAC
30 inch
96 mm
31 mm
300000 Cycle(s)
D4NS
-30 Cel
D4NS-1BF
The Omron D4NS-1BF is a DPST safety door switch with IP67 sealing, suitable for panel mounting. It offers 300K cycles electrical life, operates b/w -30°C to 70°C, and has a compact body size of 31x96 mm. Ideal for applications requiring momentary switch action in harsh environments.
D4NS-1CF
SAFETY DOOR SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Termination Type: SCREW; Body Height: 96 mm; Sealing: IP67;
D4NS-1DF
Omron's D4NS-1DF is a Safety Door Switch with IP67 sealing, 300000 cycles electrical life, and 3PST switch function. Ideal for panel mounting applications, it operates b/w -30°C to 70°C temperatures ensuring reliable performance in various industrial settings.
3PST
D4NS-1EF
SAFETY DOOR SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Manufacturer Series: D4NS; Body Width: 30 inch; Switch Action: MOMENTARY;
D4NS-1FF
The Omron D4NS-1FF is a DPST safety door switch with IP67 sealing, suitable for panel mounting. It offers 300000 cycles electrical life, operates b/w -30°C to 70°C, and has a compact body size of 31x30x96 mm. Ideal for applications requiring momentary switch action in harsh environments.
D4NS-2AF
Omron's D4NS-2AF is a Safety Door Switch with SPST function, IP67 sealing, and 300000 cycles electrical life. Ideal for panel mounting applications, it operates b/w -30°C to 70°C temperatures ensuring reliable performance in various industrial settings.
D4NS-2BF
The Omron D4NS-2BF is a DPST safety door switch with IP67 sealing, suitable for panel mounting. With an electrical life of 300k cycles, it operates b/w -30°C to 70°C temperatures. This switch has a body width of 30mm and height of 96mm, making it ideal for industrial applications.
D4NS-2DF
SAFETY DOOR SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: 3PST; Body Width: 30 inch; Minimum Operating Temperature: -30 Cel; Maximum Operating Temperature: 70 Cel;
D4NS-2EF
SAFETY DOOR SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Manufacturer Series: D4NS; Maximum Operating Temperature: 70 Cel; Body Width: 30 inch;
D4NS-2FF
SAFETY DOOR SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Body Length/Diameter: 31 mm; Body Height: 96 mm; Sealing: IP67;
D4NS-3AF
SAFETY DOOR SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Termination Type: SCREW; Minimum Operating Temperature: -30 Cel; Electrical Life: 300000 Cycle(s);
D4NS-3BF
SAFETY DOOR SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Body Width: 30 inch; Termination Type: SCREW; Switch Action: MOMENTARY;
D4NS-3CF
SAFETY DOOR SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Sealing: IP67; Maximum Operating Temperature: 70 Cel; Electrical Life: 300000 Cycle(s);
D4NS-3DF
SAFETY DOOR SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: 3PST; Sealing: IP67; Body Height: 96 mm; Body Width: 30 inch;
D4NS-4AF
The Omron D4NS-4AF is a safety door switch with SPST switch function and IP67 sealing, lasting 300000 cycles. With a body width of 30in and height of 96mm, it operates b/w -30°C to 70°C. Ideal for panel mounting applications requiring momentary switch action in harsh environments.
D4NS-4BF
SAFETY DOOR SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Body Height: 96 mm; Minimum Operating Temperature: -30 Cel; Manufacturer Series: D4NS;
D4NS-4CF
SAFETY DOOR SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Body Length/Diameter: 31 mm; Sealing: IP67; Additional Features: CONTACT RATING FOR AC: 10 A, 250 VAC;
D4NS-4DF
SAFETY DOOR SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: 3PST; Switch Action: MOMENTARY; Maximum Operating Temperature: 70 Cel; Termination Type: SCREW;
D4NS-4EF
SAFETY DOOR SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Maximum Operating Temperature: 70 Cel; Minimum Operating Temperature: -30 Cel; Body Width: 30 inch;
D4NS-4FF
The Omron D4NS-4FF is a DPST safety door switch with IP67 sealing, suitable for panel mounting. With an electrical life of 300K cycles, it operates b/w -30°C to 70°C. This 31mm x 30 inch switch is ideal for applications requiring momentary action in harsh environments.
D4NS-5AF
SAFETY DOOR SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Electrical Life: 300000 Cycle(s); Body Width: 30 inch; Minimum Operating Temperature: -30 Cel;
88 mm
56 mm
D4NS-5BF
SAFETY DOOR SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Termination Type: SCREW; Body Length/Diameter: 56 mm; Additional Features: CONTACT RATING FOR AC: 10 A, 250 VAC;
D4NS-6AF
SAFETY DOOR SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Maximum Operating Temperature: 70 Cel; Manufacturer Series: D4NS; Body Length/Diameter: 56 mm;
D4NS-6BF
SAFETY DOOR SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Manufacturer Series: D4NS; Additional Features: CONTACT RATING FOR AC: 10 A, 250 VAC; Electrical Life: 300000 Cycle(s);
D4NS-6CF
SAFETY DOOR SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Sealing: IP67; Manufacturer Series: D4NS; Body Length/Diameter: 56 mm;
D4NS-6DF
SAFETY DOOR SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: 3PST; Additional Features: CONTACT RATING FOR AC: 10 A, 250 VAC; Manufacturer Series: D4NS; Switch Action: MOMENTARY;
D4NS-6EF
SAFETY DOOR SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Maximum Operating Temperature: 70 Cel; Minimum Operating Temperature: -30 Cel; Additional Features: CONTACT RATING FOR AC: 10 A, 250 VAC;
D4NS-6FF
SAFETY DOOR SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Minimum Operating Temperature: -30 Cel; Body Length/Diameter: 56 mm; Maximum Operating Temperature: 70 Cel;
D4NS-8AF
SAFETY DOOR SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Body Length/Diameter: 56 mm; Body Width: 30 inch; Sealing: IP67;
© 2023 All rights reserved
