Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
91MCE16P1
Honeywell Sensing And Control
91MCE16P1 by Honeywell Sensing And Control is a Snap Action & Limit Switch with DPST switch function. It has an electrical life of 500,000 cycles and sealing rating of IP67. Ideal for applications requiring momentary switch action, with max AC contact current of 6A@120VAC.
LEVER
16.2 inch
66.5 mm
30 mm
6A@120VAC
6 A
.55 A
.55A@120VDC
120 V
500000 Cycle(s)
91MCE
PANEL MOUNT
85 Cel
-25 Cel
IP67
MOMENTARY
DPST
SNAP ACTING/LIMIT SWITCH
WIRE
D3SK-A0L-6
Omron
SNAP ACTING/LIMIT SWITCH; Mounting Feature: SURFACE MOUNT-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): LEVER; Termination Type: SOLDER; Manufacturer Series: D3SK;
3 inch
.9 mm
3.5 mm
.001 A
.001A@5VDC
5 V
100000 Cycle(s)
D3SK
SURFACE MOUNT-RIGHT ANGLE
SPST
SOLDER
D3SK-A0R-6
SNAP ACTING/LIMIT SWITCH; Mounting Feature: SURFACE MOUNT-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): LEVER; Switch Action: MOMENTARY; DC Maximum Rating R Load (Contact): .001A@5VDC;
D3SK-A1R-6
SNAP ACTING/LIMIT SWITCH; Mounting Feature: SURFACE MOUNT-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): LEVER; Manufacturer Series: D3SK; Maximum DC Contact Voltage: 5 V;
D3SK-B0L-6
SNAP ACTING/LIMIT SWITCH; Mounting Feature: SURFACE MOUNT-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): LEVER; Maximum DC Contact Current: .001 A; Minimum Operating Temperature: -25 Cel;
D3SK-B0R-6
SNAP ACTING/LIMIT SWITCH; Mounting Feature: SURFACE MOUNT-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): LEVER; Body Width: 3 inch; DC Maximum Rating R Load (Contact): .001A@5VDC;
D3SK-B0R
SNAP ACTING/LIMIT SWITCH; Mounting Feature: SURFACE MOUNT-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): LEVER; Maximum DC Contact Voltage: 5 V; Minimum Operating Temperature: -25 Cel;
D3SK-B1L-6
SNAP ACTING/LIMIT SWITCH; Mounting Feature: SURFACE MOUNT-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): LEVER; Maximum DC Contact Voltage: 5 V; Maximum DC Contact Current: .001 A;
D3SK-B1R-6
SNAP ACTING/LIMIT SWITCH; Mounting Feature: SURFACE MOUNT-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): LEVER; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -25 Cel;
D3SK-B1R
Omron's D3SK-B1R snap action switch has SPST function, 100000 cycle electrical life, and 5V DC contact voltage. With a lever actuator type, it is ideal for applications requiring momentary switch action in temperatures ranging from -25°C to 85°C.
HBS2KCF5ST011C
C & K Components
HBS2KCF5ST011C by C & K Components is a snap action/limit switch with SPDT function. It has a housing and insulator made of PHENOLIC, BRASS terminals, and IP65 sealing for durability in harsh environments. With an electrical life of 150k cycles, it's ideal for applications requiring reliable switching in temperatures ranging from -55 to 150 °C.
.045 inch
PHENOLIC
17.5 inch
21.1 mm
49.3 mm
1A@125VAC
1 A
1A@30VDC
125 V
30 V
1500VRMS
150000 Cycle(s)
1000000000 ohm
e3
3.614 N
150 Cel
-55 Cel
IP65
SPDT
TIN
BRASS
SCREW
HBS2KCF5ST055C
HBS2KCF5ST055C by C & K Components is a snap action/limit switch with SPDT function. It features a PHENOLIC housing and BRASS terminals, offering an electrical life of 150k cycles. With IP65 sealing, it is suitable for applications requiring a max operating temperature of 150°C and insulation resistance of 1G ohm.
11CX1
11CX1 by Honeywell Sensing And Control is a SPDT snap action/limit switch with EPOXY TERMINAL SEALING. It has a max operating temperature of 85°C and can handle up to 15A@480VAC AC current. This lever-type switch, with MOMENTARY action, is ideal for PANEL MOUNT-THREADED applications requiring reliable switching capabilities.
PRE-TRAVEL-MAX=15 DEGRE, TOTAL-TRAVEL-MAX=105 DEGRE
70.61 mm
98.04 mm
15A@480VAC
15 A
.5 A
.5A@125VDC
480 V
11CX
PANEL MOUNT-THREADED
4.1 N
EPOXY TERMINAL SEALED
12CX2
12CX2 by Honeywell is a SPDT snap action/limit switch with EPOXY sealing. It has a max operating temperature of 85°C, AC contact current of 20A@480VAC, and DC contact voltage of 0.5A@125VDC. Ideal for panel mount-threaded applications requiring a lever actuator and momentary switch action.
20A@480VAC
20 A
12CX
D2MC-01E
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LEVER; Maximum AC Contact Voltage: 125 V; Maximum DC Contact Current: .5 A;
14.1 inch
17.5 mm
31 mm
.5A@125VAC
.5A@30VDC
D2MC
80 Cel
IP40
QUICK CONNECT
D2MC-01EL
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LEVER; Maximum DC Contact Current: .5 A; AC Maximum Rating R Load (Contact): .5A@125VAC;
D2MC-5E
Omron's D2MC-5E snap action switch has an electrical life of 100k cycles, SPDT switch function, and IP40 sealing. With a max operating temp of 80°C and AC contact current of 5A@250VAC, it is ideal for panel mounting applications requiring momentary switch action.
5A@250VAC
5 A
250 V
D2MC-5EL
Omron's D2MC-5EL snap action switch has an electrical life of 100,000 cycles and a max AC contact current of 5A. With a body width of 14.1mm and sealing rating of IP40, it is ideal for panel mounting applications requiring momentary switch action at temperatures ranging from -25°C to 80°C.
D2MC-5F
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LEVER; Manufacturer Series: D2MC; Switch Action: MOMENTARY;
D2MC-5FL
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LEVER; Maximum AC Contact Voltage: 250 V; Termination Type: QUICK CONNECT;
D2MC-5H
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LEVER; Maximum AC Contact Voltage: 250 V; Manufacturer Series: D2MC;
D2MC-5HL
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LEVER; Maximum AC Contact Current: 5 A; Maximum AC Contact Voltage: 250 V;
D3D-211
Omron's D3D-211 is a SPDT snap action/limit switch with 100000 cycles electrical life. With IP00 sealing, it operates b/w -30°C to 60°C. Lever actuator type, suitable for panel mounting applications with 1A@125VAC AC contact current rating.
9.7
15 inch
15 mm
36.4 mm
e4
D3D
2 N
60 Cel
-30 Cel
IP00
Silver (Ag)
CONNECTOR
D3D-221
Omron's D3D-221 Snap Action & Limit Switch offers 100000 cycles electrical life, SPST switch function, and IP00 sealing. With a body width of 15mm and max operating temperature of 60°C, it is ideal for panel mounting applications requiring momentary switch action at up to 1A@125VAC.
102HS1
102HS1 by Honeywell Sensing And Control is a hermetically sealed snap action/limit switch with a body width of 17.45 inch and a max operating temperature of 149 °C. It has a SPDT switch function and is commonly used for panel mounting applications.
1.9
17.45 inch
28.7 mm
49.78 mm
1A@28VDC
28 V
6.12 N
149 Cel
-54 Cel
1.65 mm
HERMETICALLY SEALED
111SM858-H403
111SM858-H403 by Honeywell Sensing And Control is a SPDT snap acting/limit switch with 10.16" body width and corrosion proof sealing. It has a max AC contact current of 5A@250VAC, suitable for applications requiring momentary switch action and lever actuator type.
6.3
10.16 inch
15.88 mm
28.83 mm
5A@30VDC
THROUGH HOLE-STRAIGHT
1.95 N
5.54 mm
CORROSION PROOF
311SM3-T
311SM3-T by Honeywell Sensing And Control is a SNAP ACTING/LIMIT SWITCH with SPDT switch function. It features PHENOLIC housing material, SILVER plating, and operates b/w -55 to 121 °C. Ideal for PANEL MOUNT applications, it has a max AC contact current of 5A@250VAC and DC contact current of 5A@30VDC.
1.77 inch
9.32
6.35 inch
9.04 mm
19.84 mm
SILVER
SNAP ACTION
.15 N
.283 inch
121 Cel
7.87 mm
.093 inch
BZ-2RW80147-A2
BZ-2RW80147-A2 by Honeywell is a SPDT snap action/limit switch with 15A@480VAC AC rating and 0.5A@125VDC DC rating. It features a 17.45 inch body width, 29.21 mm body height, and 2.39 mm actuator travel with LEVER type actuator. Ideal for panel mounting applications requiring momentary switch action in industrial settings.
2.39
29.21 mm
49.28 mm
1.67 N
BZE6-2RN4
BZE6-2RN4 by Honeywell is a snap action/limit switch with SPDT function, IP54 sealing, and 15A@480VAC AC max rating. It has a lever actuator type, 10.34mm travel, and 5.56N max operating force. Ideal for panel mounting applications requiring momentary switch action in industrial settings.
10.34
25.4 inch
78.58 mm
77.216 mm
5.56 N
4.78 mm
IP54
311SM705-T
311SM705-T by Honeywell is a SPDT snap action/limit switch with 6.35" width, 9.04mm height, and 3.71mm actuator travel. It has a max operating temp of 71°C and can handle up to 10A@250VAC or 5A@30VDC. Ideal for panel mounting applications requiring momentary switch action with wire termination.
3.71
10A@250VAC
10 A
.12 N
71 Cel
3.05 mm
6HM1-1
6HM1-1 by Honeywell is a hermetically sealed SPDT snap acting/limit switch with a body width of 6.35in and max operating temperature of 260°C. It has a max AC contact current of 2.5A@115VAC, making it ideal for panel mount applications requiring precise momentary switch action in harsh environments.
.84
12.19 mm
20.04 mm
2.5A@115VAC
2.5 A
4 A
4A@28VDC
115 V
260 Cel
-65 Cel
.76 mm
EX-XR9
EX-XR9 by Honeywell Sensing And Control is a SPDT snap action/limit switch with 15A@480VAC AC and 0.5A@125VDC DC max ratings. Featuring a lever actuator type, it has a body width of 65.02 inch and height of 51.18 mm, making it suitable for panel mount-threaded applications requiring momentary switch action.
5.56
65.02 inch
51.18 mm
93.47 mm
7.78 N
5.56 mm
JS-254
The Honeywell Sensing And Control JS-254 is a snap action/limit switch with 6.65" body width, 13.5mm height, and 0.76mm actuator travel. It features a lever actuator type, momentary switch action, and max operating force of 2.5N. Ideal for panel mounting applications requiring wire termination.
.76
6.65 inch
13.5 mm
20.6 mm
2.5 N
82CX2A
82CX2A by Honeywell is a Snap Action & Limit Switch with SPDT switch function, suitable for PANEL MOUNT applications. It offers an EXPLOSION PROOF sealing and can handle up to 20A@480VAC AC contact current. With a max operating temperature of 85°C, it features a LEVER actuator type and SCREW termination.
O.F. = 1.25 NM, P.T. = 15 DEG, T.T. = 105 DEG
101.6 inch
145 mm
101.6 mm
82CX
EXPLOSION PROOF
41EN1-6
The Honeywell 41EN1-6 is a corrosion-proof SPDT snap action/limit switch with lever actuator. It has a max DC contact voltage of 28V and current rating of 4A, suitable for panel mount-threaded applications. With a compact body height of 26.67mm and length of 25.4mm, it offers reliable momentary switch action for various industrial uses.
TWO SWITCHES ARE AVAILABLE
26.67 mm
25.4 mm
313SX1-T
313SX1-T by Honeywell Sensing And Control is a SPDT snap acting/limit switch with gold plating, suitable for panel mounting. It has a max operating temperature of 121°C and can handle up to 1A@125VAC or 1A@28VDC. This lever-type switch with 0.49N max force is ideal for applications requiring precise momentary switching.
3.6 inch
2.01
CE; CSA; CUL; ENEC; UL
5.1 inch
13.6 mm
14.7 mm
GOLD
.49 N
.332 inch
© 2023 All rights reserved
