Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
SS-01GL14
Omron
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): FORMED HINGE LEVER; Maximum Operating Force: .49 N; Maximum AC Contact Current: .1 A;
2
FORMED HINGE LEVER
6.4 inch
10.2 mm
19.8 mm
.1A@125VAC
.1 A
.1A@30VDC
125 V
30 V
200000 Cycle(s)
SS
PANEL MOUNT
.49 N
85 Cel
-25 Cel
1.2 mm
MOMENTARY
SPDT
SNAP ACTING/LIMIT SWITCH
SOLDER
SS-01GL2-ED
Omron SS-01GL2-ED is a SPDT snap action/limit switch with 200000 cycles electrical life. Featuring HINGE ROLLER LEVER actuator type, it has IP40 sealing and operates b/w -25 to 85 °C. Ideal for applications requiring momentary switch action with 0.1A@125VAC AC max rating and 0.1A@30VDC DC max rating.
HINGE ROLLER LEVER
THROUGH HOLE-STRAIGHT
.25 N
IP40
SS-01GL2-E
Omron SS-01GL2-E is a SPDT snap action switch with 200000 cycles life. It has IP40 sealing, operates b/w -25 to 85 °C, and supports 0.1A@125VAC AC load. With HINGE ROLLER LEVER actuator, it's ideal for panel mounting applications requiring momentary switch action.
SS-01GL2D
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): HINGE ROLLER LEVER; Body Width: 6.4 inch; Maximum Operating Force: .49 N;
SS-01GLD1
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Minimum Operating Temperature: -25 Cel; AC Maximum Rating R Load (Contact): .1A@125VAC;
HINGE LEVER
THROUGH HOLE-RIGHT ANGLE
SS-01GLD2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Maximum DC Contact Voltage: 30 V; Maximum Operating Force: .49 N;
SS-10GL13D
Omron SS-10GL13D is a SPDT snap action/limit switch with 50000 cycles electrical life. Featuring IP40 sealing, it operates b/w -25 to 85°C. With a max AC contact current of 10.1A@125VAC, it is ideal for applications requiring momentary switch action and simulated roller lever actuator travel of 2mm.
SIMULATED ROLLER LEVER
10.1A@125VAC
10.1 A
10.1A@14VDC
14 V
50000 Cycle(s)
1 mm
SS-10GL13T
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SIMULATED ROLLER LEVER; Contact Function: ON-(ON); Insulation Resistance: 100000000 ohm;
0 deg
.622 inch
ROHS COMPLIANT
ON-(ON)
SNAP ACTION
1500VAC
100000000 ohm
.421 inch
.28 inch
QUICK CONNECT
SS-10GL14
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): FORMED HINGE LEVER; DC Maximum Rating R Load (Contact): 10.1A@14VDC; Maximum Pre Travel: 1 mm;
10.1A@250VAC
250 V
SS-10GL2D
Omron SS-10GL2D is a SPDT snap action/limit switch with 50000 cycles electrical life. It has a sealing rating of IP40, operates b/w -25 to 85°C, and supports up to 10.1A@125VAC or 14VDC. With HINGE ROLLER LEVER actuator type, it's ideal for applications requiring momentary switch action in industrial settings.
SS-10GL2
Omron SS-10GL2 is a SPDT snap action/limit switch with 50000 cycles electrical life. It has a sealing rating of IP40 and operates b/w -25 to 85°C. With HINGE ROLLER LEVER actuator type, it is ideal for panel mounting applications requiring momentary switch action.
SS-5-FD1
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Body Length/Diameter: 19.8 mm; Minimum Operating Temperature: -25 Cel;
1
PIN PLUNGER
5A@125VAC
5 A
5A@14VDC
.5 mm
SS-5-FD2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Maximum AC Contact Voltage: 125 V; Switch Action: MOMENTARY;
SS-5-FD
Omron SS-5-FD snap action switch has 200000 cycles electrical life, SPDT switch function, and IP40 sealing. With a max AC contact current of 5A@125VAC, it is ideal for applications requiring momentary switch action in environments with temperatures ranging from -25 to 85°C.
SS-5D1
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Maximum AC Contact Current: 5 A; Maximum DC Contact Voltage: 14 V;
1.47 N
SS-5GL-FD1
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): HINGE LEVER; AC Maximum Rating R Load (Contact): 5A@125VAC; Electrical Life: 200000 Cycle(s);
SS-5GL-FD2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Maximum Operating Temperature: 85 Cel; Electrical Life: 200000 Cycle(s);
SS-5GL-FD
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Electrical Life: 200000 Cycle(s); Termination Type: SOLDER;
SS-5GL13-FD2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): SIMULATED ROLLER LEVER; Maximum Pre Travel: 1.2 mm; Maximum DC Contact Current: 5 A;
SS-5GL13-FD
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): SIMULATED ROLLER LEVER; Maximum Pre Travel: 1.2 mm; Actuator Travel (mm): 2;
SS-5GL13-FT
Omron SS-5GL13-FT is a SPDT snap action/limit switch with 200000 cycles electrical life. Featuring IP40 sealing, it operates b/w -25 to 85°C. With a max AC contact current of 5A@125VAC, it's ideal for panel mounting applications requiring momentary switch action.
SS-5GL13D1
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): SIMULATED ROLLER LEVER; Maximum AC Contact Current: 5 A; Maximum AC Contact Voltage: 125 V;
SS-5GL13D2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): SIMULATED ROLLER LEVER; Maximum Operating Force: .49 N; AC Maximum Rating R Load (Contact): 5A@125VAC;
SS-5GL14-F
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): FORMED HINGE LEVER; Minimum Operating Temperature: -25 Cel; DC Maximum Rating R Load (Contact): 5A@14VDC;
.16 N
SS-5GL14T
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): FORMED HINGE LEVER; DC Maximum Rating R Load (Contact): 5A@14VDC; Maximum Operating Temperature: 85 Cel;
SS-5GL14
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): FORMED HINGE LEVER; Body Height: 10.2 mm; Actuator Travel (mm): 2;
SS-5GL2-FD1
Omron's SS-5GL2-FD1 is a snap action/limit switch with a 200000 cycle electrical life. It has a body width of 6.4 inch and sealing rating of IP40. This switch, with SPDT switch function, is commonly used in applications requiring momentary switch action and can handle max AC contact current of 5A@125VAC or DC contact current of 5A@14VDC.
SS-5GL2-FD2
Omron SS-5GL2-FD2 is a SPDT snap action/limit switch with 200000 cycles electrical life. Featuring HINGE ROLLER LEVER actuator, it has 5A@125VAC AC max rating and -25 to 85°C operating temp range. Ideal for applications requiring precise momentary switching in compact spaces.
SS-5GL2-FD
Omron SS-5GL2-FD is a SPDT snap action/limit switch with 200000 cycles electrical life. Featuring HINGE ROLLER LEVER actuator type, it has IP40 sealing and operates b/w -25°C to 85°C. Ideal for applications requiring momentary switch action with 5A@125VAC AC max rating and 5A@14VDC DC max rating.
SS-5GL2-FT
Omron SS-5GL2-FT is a SPDT snap action/limit switch with 200000 cycles electrical life. It has a max AC contact current of 5A@125VAC and operates b/w -25°C to 85°C. Ideal for panel mounting applications, it features a HINGE ROLLER LEVER actuator type with IP40 sealing.
SS-5GL2D2
Omron SS-5GL2D2 is a SPDT snap action/limit switch with 200000 cycles electrical life. It has a max AC contact current of 5A@125VAC and sealing rating of IP40. Ideal for applications requiring momentary switch action, such as industrial machinery control systems.
SS-5GLD1
Omron SS-5GLD1 is a SPDT snap action/limit switch with 200000 cycles electrical life. It has a 6.4" body width, IP40 sealing, and operates b/w -25°C to 85°C. Ideal for applications requiring momentary switch action with 5A@125VAC AC max rating load capacity.
BZE7-2RN2-C
Honeywell Sensing And Control
BZE7-2RN2-C by Honeywell is a SPDT snap action/limit switch with IP65 sealing. It has a max operating temperature of 71°C and can handle 0.5A@480VAC AC contact current. Ideal for panel mounting applications requiring momentary switch action and top roller arm actuator type.
10.34
TOP ROLLER ARM
.5A@480VAC
.5 A
.5A@250VDC
480 V
5.56 N
71 Cel
-30 Cel
4.78 mm
IP65
WIRE
BZE7-2RN2-PG
BZE7-2RN2-PG by Honeywell is a SPDT snap action/limit switch with IP65 sealing. It has a max operating temperature of 71°C and can handle 0.5A AC/DC contact current. Ideal for panel mounting applications, it features a top roller arm actuator with 10.34mm travel and MOMENTARY switch action.
E7
BZE7S-2RN-PG
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): TOP PLUNGER; Maximum AC Contact Voltage: 480 V; Maximum Operating Temperature: 71 Cel;
7.54
TOP PLUNGER
6.67 N
1.98 mm
V7-1C13D8-201
Honeywell Sensing And Control's V7-1C13D8-201 is a 10.2" snap action/limit switch with SPDT function, ideal for panel mounting applications. It offers a max AC contact current of 15A@277VAC and operates b/w -40 to 82°C temperatures. The switch features a roller lever actuator with 1.99mm travel and 1.19mm pre-travel, delivering a max force of 1.72N for precise control in various industrial settings.
1.99
ROLLER LEVER
10.2 inch
15.9 mm
28.8 mm
15A@277VAC
15 A
A@VDC
277 V
V7
1.72 N
82 Cel
-40 Cel
1.19 mm
V7-1C17D844-429
Honeywell Sensing And Control's V7-1C17D844-429 is a SPDT snap action/limit switch with 10.2" width, 15.9mm height, and 3.05mm actuator travel. It operates b/w -40 to 82°C, handles up to 15A@250VAC for AC contact current, and has a max force of 1.27N. Ideal for panel mounting applications requiring momentary switch action with quick connect termination type.
3.05
SPECIAL LEVER
15A@250VAC
1.27 N
1.91 mm
V7-1X1AD9C1
V7-1X1AD9C1 by Honeywell is a SPDT snap action/limit switch with 10.2" body width and 15.9mm height, suitable for panel mounting applications. It has a max operating temperature of 200°C, AC contact current of 6A@250VAC, and actuator travel of 2.46mm, making it ideal for industrial control systems requiring precise momentary switching capabilities.
2.46
6A@250VAC
6 A
1.13 N
200 Cel
V7-1Z13E9
V7-1Z13E9 by Honeywell is a SPDT snap action/limit switch with 10.2" body width, 15.9mm height, and 2.46mm actuator travel. It has a max operating temperature of 82°C and can handle up to 25A@277VAC AC contact current. Ideal for panel mounting applications requiring momentary switch action with quick connect termination type.
25A@277VAC
25 A
2.21 N
V7-2B29D8
V7-2B29D8 by Honeywell is a 10.2" snap action switch with SPST function, ideal for panel mounting applications. It operates b/w -40°C to 82°C, handling up to 11A@277VAC current load. Featuring a pin plunger actuator with 2.46mm travel, it offers momentary switch action and quick connect termination.
11A@277VAC
11 A
.74 N
SPST
V7-6C17D8
V7-6C17D8 by Honeywell is a SPDT snap acting/limit switch with thermoplastic housing. It has a max AC contact current of 15A@277VAC and operating temperature range from -40 to 82°C. Ideal for panel mounting applications requiring momentary switch action with quick connect termination.
2.21
SILVER
GOLD
GOLD OVER COPPER
THERMOPLASTIC
3.89 N
.578 inch
V7-7A19D8-374
V7-7A19D8-374 by Honeywell is a 10.2" snap action switch with SPST function, ideal for panel mounting applications. It operates b/w -40 to 85°C, handling up to 11A@250VAC current. Featuring a curved tip lever actuator with 3.22mm travel, it offers momentary switch action and quick connect termination.
3.22
CURVED TIP LEVER
11A@250VAC
1.98 N
2.03 mm
V7-7B17D8-201
V7-7B17D8-201 by Honeywell is a SNAP ACTING/LIMIT SWITCH with SPDT switch function. It has a 100000 cycle electrical life and can handle up to 11A@277VAC AC max rating R load. This switch, made of POLYESTER housing material, is ideal for applications requiring precise snap action control in industrial settings.
.82 inch
STEEL
2.28
0.33HP@125VAC
100000 Cycle(s)
POLYESTER
2.78 N
.808 inch
1.42 mm
.385 inch
D2VW-01-1HS
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Body Length/Diameter: 15.9 mm; Maximum Operating Force: 1.96 N;
2.2
10.3 inch
33 mm
1000000 Cycle(s)
D2VW
1.96 N
90 Cel
IP50
QUICK CONNECT/SOLDER
D2VW-01L1-1MS
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Minimum Operating Temperature: -40 Cel; Maximum AC Contact Voltage: 125 V;
5.6
1.18 N
4 mm
IP67
D2VW-01L1A-1HS
Omron's D2VW-01L1A-1HS snap action switch offers 1000000 cycles electrical life with SPDT function. With IP50 sealing, it operates b/w -40 to 90°C, handling 0.1A@125VAC and 0.1A@30VDC. Ideal for panel mounting applications requiring momentary switch action in a compact design.
2.4
SHORT HINGE PLUNGER
1.6 mm
D2VW-01L1A-1MS
Omron's D2VW-01L1A-1MS snap action/limit switch has a 1000000 cycle electrical life, IP67 sealing, and SPDT switch function. With a body width of 10.3in and max operating temperature of 90°C, it is ideal for panel mounting applications requiring momentary switch action in harsh environments.
D2VW-01L1B-1MS
Omron's D2VW-01L1B-1MS is a snap action/limit switch with SPDT function, IP67 sealing, and 1000000 cycle electrical life. Ideal for panel mounting applications, it has a max operating temperature of 90°C and can handle AC contact voltage up to 125VAC.
12.2
LONG HINGE LEVER
.59 N
9 mm
© 2023 All rights reserved
