Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
B3J-6200
Omron
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): HINGED TYPE; Maximum DC Contact Current: .05 A; Maximum DC Contact Voltage: 24 V;
.3
HINGED TYPE
12 inch
3.5 mm
18 mm
.05 A
.05A@24VDC
24 V
3000000 Cycle(s)
PANEL MOUNT
1.76 N
70 Cel
-25 Cel
.3 mm
MOMENTARY-TACTILE
SPST
SNAP ACTING/LIMIT SWITCH
SOLDER
B3J-6300
The Omron B3J-6300 is a SPST snap action/limit switch with 3000000 cycle electrical life. Featuring a hinged type actuator with 0.3mm travel, it has a max operating force of 1.76N and operates at temperatures ranging from -25 to 70°C. Ideal for panel mounting applications requiring momentary-tactile switch action.
B3J-6400
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): HINGED TYPE; Termination Type: SOLDER; Maximum DC Contact Voltage: 24 V;
B3J-7000
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): HINGED TYPE; Body Width: 12 inch; Maximum Operating Temperature: 70 Cel;
B3J-7100
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): HINGED TYPE; Switch Action: MOMENTARY-TACTILE; Actuator Travel (mm): .3;
B3J-7200
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): HINGED TYPE; Maximum Operating Temperature: 70 Cel; Switch Action: MOMENTARY-TACTILE;
B3J-7400
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): HINGED TYPE; Actuator Travel (mm): .3; DC Maximum Rating R Load (Contact): .05A@24VDC;
D2FW-G082M
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): LONG LEAF LEVER; Body Width: 12 inch; Maximum DC Contact Current: .1 A;
1
LONG LEAF LEVER
13.5 mm
23.5 mm
.1 A
.1A@30VDC
30 V
100000 Cycle(s)
D2FW-G
2.94 N
85 Cel
-40 Cel
IP67
MOMENTARY
WIRE
D2FW-G083M
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): LONG LEAF LEVER; Maximum Operating Force: 2.94 N; Maximum DC Contact Voltage: 30 V;
D2FW-G273M
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): LEAF LEVER; Sealing: IP67; Maximum DC Contact Voltage: 30 V;
LEAF LEVER
1 A
1A@30VDC
30000 Cycle(s)
2.45 N
D2FW-G282M
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): LONG LEAF LEVER; Sealing: IP67; Body Height: 13.5 mm;
V7-2B29D8
Honeywell Sensing And Control
V7-2B29D8 by Honeywell is a 10.2" snap action switch with SPST function, ideal for panel mounting applications. It operates b/w -40°C to 82°C, handling up to 11A@277VAC current load. Featuring a pin plunger actuator with 2.46mm travel, it offers momentary switch action and quick connect termination.
2.46
PIN PLUNGER
10.2 inch
15.9 mm
28.8 mm
11A@277VAC
11 A
277 V
.74 N
82 Cel
1.19 mm
QUICK CONNECT
V7-7A19D8-374
V7-7A19D8-374 by Honeywell is a 10.2" snap action switch with SPST function, ideal for panel mounting applications. It operates b/w -40 to 85°C, handling up to 11A@250VAC current. Featuring a curved tip lever actuator with 3.22mm travel, it offers momentary switch action and quick connect termination.
3.22
CURVED TIP LEVER
11A@250VAC
A@VDC
250 V
V7
1.98 N
2.03 mm
D3D-121
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): PLUNGER; Switch Action: MOMENTARY; Termination Type: CONNECTOR;
9
PLUNGER
15 inch
15 mm
36.4 mm
1A@125VAC
125 V
e4
D3D
2 N
60 Cel
-30 Cel
IP00
Silver (Ag)
CONNECTOR
D3D-221
Omron's D3D-221 Snap Action & Limit Switch offers 100000 cycles electrical life, SPST switch function, and IP00 sealing. With a body width of 15mm and max operating temperature of 60°C, it is ideal for panel mounting applications requiring momentary switch action at up to 1A@125VAC.
9.7
LEVER
WW1A24A-D8
WW1A24A-D8 by Honeywell is a 17.53" wide snap action/limit switch with SPST function, 40mm height, and 3A@125VAC AC contact current. Featuring a plunger lever actuator type, it has 5mm travel and quick connect termination. Ideal for panel mounting applications requiring momentary switch action at up to 125V AC voltage.
5
PLUNGER LEVER
17.53 inch
40 mm
31.52 mm
3A@125VAC
3 A
WW
WW1G02A-D9
WW1G02A-D9 by Honeywell Sensing And Control is a 17.53" snap action/limit switch with SPST function, 3A@125VAC AC contact current, and 5mm actuator travel. It features a PLUNGER LEVER type actuator and MOMENTARY switch action, suitable for PANEL MOUNT applications requiring quick connect termination.
WW1G03A-D7
WW1G03A-D7 by Honeywell is a SPST snap action/limit switch with 17.53" body width and 40mm height. It has a max AC contact current of 3A@125VAC, ideal for panel mount applications requiring momentary switch action. The PLUNGER LEVER actuator offers 5mm travel and quick connect termination type for easy installation.
WW1K05D-D9
WW1K05D-D9 by Honeywell Sensing And Control is a SPST snap action/limit switch with 17.53" body width and 40mm height. Featuring PLUNGER LEVER actuator type, it has 0.1A@125VAC AC max rating R load. Ideal for panel mount applications, this switch offers momentary switch action with quick connect termination type.
.1A@125VAC
D2HW-BL202ML
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): PIN PLUNGER; Minimum Operating Temperature: -40 Cel; Sealing: IP67;
1.4
5.3 inch
6.5 mm
13.3 mm
2 A
2A@12VDC
12 V
.75 N
D2HW-BL202MR
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): PIN PLUNGER; Body Length/Diameter: 13.3 mm; Maximum DC Contact Current: 2 A;
D2HW-BL202M
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): PIN PLUNGER; Switch Action: MOMENTARY; Termination Type: WIRE;
D2HW-BL203ML
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): PIN PLUNGER; Body Width: 5.3 inch; Actuator Travel (mm): 1.4;
D2HW-BL203MR
Omron's D2HW-BL203MR is a snap action/limit switch with SPST function. It has an electrical life of 100K cycles, IP67 sealing, and operates b/w -40 to 85°C. With PIN PLUNGER actuator type, it offers 1.4mm travel for panel mounting applications at a max force of 0.75N and current rating of 2A@12VDC.
D2HW-BL203M
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): PIN PLUNGER; Body Height: 6.5 mm; Maximum DC Contact Current: 2 A;
D2HW-BL212ML
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): HINGE LEVER; Body Length/Diameter: 13.3 mm; Electrical Life: 100000 Cycle(s);
1.6
HINGE LEVER
D2HW-BL212MR
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): HINGE LEVER; Body Length/Diameter: 13.3 mm; DC Maximum Rating R Load (Contact): 2A@12VDC;
D2HW-BL212M
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): HINGE LEVER; Maximum DC Contact Voltage: 12 V; Termination Type: WIRE;
D2HW-BL213ML
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): HINGE LEVER; Maximum DC Contact Current: 2 A; Actuator Travel (mm): 1.6;
D2HW-BL213MR
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): HINGE LEVER; Minimum Operating Temperature: -40 Cel; DC Maximum Rating R Load (Contact): 2A@12VDC;
D2HW-BL213M
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): HINGE LEVER; Maximum DC Contact Current: 2 A; Minimum Operating Temperature: -40 Cel;
D2HW-BL222ML
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): LONG HINGE LEVER; Body Length/Diameter: 13.3 mm; DC Maximum Rating R Load (Contact): 2A@12VDC;
2.5
LONG HINGE LEVER
.5 N
D2HW-BL222MR
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): LONG HINGE LEVER; Sealing: IP67; Termination Type: WIRE;
D2HW-BL222M
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): LONG HINGE LEVER; Maximum Operating Temperature: 85 Cel; Maximum DC Contact Voltage: 12 V;
D2HW-BL223ML
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): LONG HINGE LEVER; Maximum Operating Force: .5 N; Body Width: 5.3 inch;
D2HW-BL223MR
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): LONG HINGE LEVER; Minimum Operating Temperature: -40 Cel; Maximum DC Contact Voltage: 12 V;
D2HW-BL223M
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): LONG HINGE LEVER; Maximum DC Contact Voltage: 12 V; Maximum DC Contact Current: 2 A;
D2HW-BL232ML
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): SIMULATED ROLLER LEVER; Minimum Operating Temperature: -40 Cel; Maximum Operating Force: .65 N;
1.9
SIMULATED ROLLER LEVER
D2HW
.65 N
D2HW-BL232MR
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): SIMULATED ROLLER LEVER; Body Length/Diameter: 13.3 mm; Sealing: IP67;
D2HW-BL232M
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): SIMULATED ROLLER LEVER; Body Width: 5.3 inch; Manufacturer Series: D2HW;
D2HW-BL233ML
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): SIMULATED ROLLER LEVER; Switch Action: MOMENTARY; Body Height: 6.5 mm;
D2HW-BL233MR
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): SIMULATED ROLLER LEVER; Switch Action: MOMENTARY; Body Width: 5.3 inch;
D2HW-BL233M
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): SIMULATED ROLLER LEVER; Actuator Travel (mm): 1.9; Maximum Operating Force: .65 N;
D2HW-BL262ML
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): LEAF LEVER; DC Maximum Rating R Load (Contact): 2A@12VDC; Body Width: 5.3 inch;
1.8
1.8 N
D2HW-BL262MR
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): LEAF LEVER; Maximum DC Contact Current: 2 A; Electrical Life: 100000 Cycle(s);
D2HW-BL262M
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): LEAF LEVER; Electrical Life: 100000 Cycle(s); Sealing: IP67;
D2HW-BL263ML
Omron D2HW-BL263ML is a snap action/limit switch with SPST function. It offers IP67 sealing, 100000 cycles electrical life, and 1.8mm actuator travel. Ideal for panel mounting applications in environments ranging from -40°C to 85°C.
D2HW-BL263MR
The Omron D2HW-BL263MR snap action switch has an electrical life of 100,000 cycles and sealing rating of IP67. With a max operating force of 1.8N, it is ideal for applications requiring momentary switch action in environments with temperatures ranging from -40°C to 85°C. The switch features a leaf lever actuator type and can handle a max DC contact current of 2A at 12VDC.
© 2023 All rights reserved
