Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
V-15G3-1A5-T-K
Omron
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LONG HINGE LEVER; Maximum DC Contact Current: 15 A; Maximum AC Contact Current: 15 A;
12
LONG HINGE LEVER
10.3 inch
15.9 mm
27.8 mm
15A@250VAC
15 A
15A@8VDC
250 V
8 V
20000 Cycle(s)
V
PANEL MOUNT
.98 N
150 Cel
-25 Cel
9 mm
IP40
MOMENTARY
SPDT
SNAP ACTING/LIMIT SWITCH
SOLDER
V-15G5-1A5-T-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE ROLLER LEVER; Maximum DC Contact Voltage: 8 V; DC Maximum Rating R Load (Contact): 15A@8VDC;
2.5
SHORT HINGE ROLLER LEVER
1.5 mm
V-16-1A5
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Electrical Life: 100000 Cycle(s); DC Maximum Rating R Load (Contact): 16A@8VDC;
2.2
PIN PLUNGER
16A@250VAC
16 A
16A@8VDC
100000 Cycle(s)
1.96 N
80 Cel
1.2 mm
V-16-1C25
Omron V-16-1C25 is a SPDT snap action/limit switch with 100000 cycles electrical life. It has a max AC contact current of 16A@250VAC and operates b/w -25 to 80°C. Ideal for panel mounting applications requiring momentary switch action with IP40 sealing.
QUICK CONNECT
V-16-1C5
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Body Width: 10.3 inch; Maximum AC Contact Current: 16 A;
V-161-1C25
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE LEVER; Termination Type: QUICK CONNECT; Maximum Pre Travel: 1.6 mm;
2.4
SHORT HINGE LEVER
1.6 mm
V-162-1A5
Omron V-162-1A5 is a SPDT snap acting/limit switch with 100000 cycles electrical life. It has a max AC contact current of 16A@250VAC and operates b/w -25 to 80°C. With HINGE LEVER actuator type, it is ideal for panel mounting applications requiring momentary switch action.
5.6
HINGE LEVER
4 mm
V-162-1C25
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Body Height: 15.9 mm; DC Maximum Rating R Load (Contact): 16A@8VDC;
V-162-1C5
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Termination Type: QUICK CONNECT; Actuator Travel (mm): 5.6;
V-163-1A5
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LONG HINGE LEVER; Sealing: IP40; Body Height: 15.9 mm;
11
V-164-1A5
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SIMULATED ROLLER LEVER; Sealing: IP40; Minimum Operating Temperature: -25 Cel;
SIMULATED ROLLER LEVER
V-164-1AR5
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SIMULATED ROLLER LEVER; DC Maximum Rating R Load (Contact): 16A@8VDC; Minimum Operating Temperature: -25 Cel;
V-164-1C5
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SIMULATED ROLLER LEVER; Maximum DC Contact Current: 16 A; Maximum AC Contact Voltage: 250 V;
V-165-1A5
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE ROLLER LEVER; Maximum DC Contact Voltage: 8 V; Switch Action: MOMENTARY;
V-165-1AL5
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE ROLLER LEVER; Actuator Travel (mm): 2.4; Switch Action: MOMENTARY;
V-165-1AR5
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE ROLLER LEVER; Maximum DC Contact Current: 16 A; Body Height: 15.9 mm;
V-165-1C25
Omron V-165-1C25 snap action switch has SPDT function with 100000 cycles life. With IP40 sealing, it operates b/w -25°C to 80°C. Ideal for panel mounting applications, it offers 16A@250VAC AC and DC contact ratings.
V-165-1C5
Omron V-165-1C5 is a SPDT snap action/limit switch with 100000 cycles electrical life, IP40 sealing, and 16A@250VAC AC max rating. It features a short hinge roller lever actuator for applications requiring momentary switch action in industrial panels.
STAINLESS STEEL
15 mohm
1500VAC
100000000 ohm
.472 inch
V-166-1C25
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE ROLLER LEVER; AC Maximum Rating R Load (Contact): 16A@250VAC; Body Length/Diameter: 27.8 mm;
HINGE ROLLER LEVER
V-166-1C5
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE ROLLER LEVER; Actuator Travel (mm): 5.6; Maximum AC Contact Voltage: 250 V;
V-16G-1C25
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Maximum AC Contact Voltage: 250 V; Actuator Travel (mm): 2.2;
V-16G-1C5
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Maximum Operating Force: 1.96 N; Maximum DC Contact Voltage: 8 V;
V-21-1C6
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Body Width: 10.3 inch; AC Maximum Rating R Load (Contact): 21A@250VAC;
21A@250VAC
21 A
21A@8VDC
3.92 N
V-21-1CR6
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Actuator Travel (mm): 2.2; Minimum Operating Temperature: -25 Cel;
21.9 mm
40.2 mm
V-211-1C6
Omron V-211-1C6 is a SPDT snap action/limit switch with 100000 cycles electrical life. It has a max AC contact current of 21A@250VAC and operates b/w -25°C to 80°C. With IP40 sealing, it is ideal for panel mounting applications requiring momentary switch action.
V-213-1C6
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LONG HINGE LEVER; Sealing: IP40; Minimum Operating Temperature: -25 Cel;
V-214-1C6
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SIMULATED ROLLER LEVER; Termination Type: QUICK CONNECT; DC Maximum Rating R Load (Contact): 21A@8VDC;
V-216-1C6
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE ROLLER LEVER; Electrical Life: 100000 Cycle(s); DC Maximum Rating R Load (Contact): 21A@8VDC;
V-21G-1C6-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Maximum Operating Force: 3.92 N; Minimum Operating Temperature: -25 Cel;
BA-2RQ1
Honeywell Sensing And Control
BA-2RQ1 by Honeywell Sensing And Control is a SPDT snap action/limit switch with 20A@480VAC AC max rating. Featuring a hardened steel plunger, it has a body width of 17.45 inch and max DC contact current of 0.5 A. Ideal for panel mount-threaded applications requiring momentary switch action.
6.83
HARDENED STEEL PLUNGER
17.45 inch
20.83 mm
49.28 mm
20A@480VAC
20 A
.5 A
.5A@125VDC
480 V
125 V
PANEL MOUNT-THREADED
6.12 N
1.27 mm
HBS2KCF5SJ055C
C & K Components
HBS2KCF5SJ055C by C & K Components is a snap action/limit switch with SPDT function. It features a PHENOLIC housing and BRASS terminals, offering an electrical life of 150k cycles. With IP65 sealing, it's ideal for applications requiring a max operating temperature of 150°C and insulation resistance of 1G ohm.
.045 inch
PHENOLIC
6.11
HIGH OVER TRAVEL PLUNGER
17.5 inch
21.1 mm
49.3 mm
1A@125VAC
1 A
1A@30VDC
30 V
1500VRMS
150000 Cycle(s)
1000000000 ohm
e3
3.63 N
-55 Cel
.51 mm
IP65
TIN
BRASS
SCREW
HBS2KCF5ST011C
HBS2KCF5ST011C by C & K Components is a snap action/limit switch with SPDT function. It has a housing and insulator made of PHENOLIC, BRASS terminals, and IP65 sealing for durability in harsh environments. With an electrical life of 150k cycles, it's ideal for applications requiring reliable switching in temperatures ranging from -55 to 150 °C.
LEVER
3.614 N
HBS2KCF5ST055C
HBS2KCF5ST055C by C & K Components is a snap action/limit switch with SPDT function. It features a PHENOLIC housing and BRASS terminals, offering an electrical life of 150k cycles. With IP65 sealing, it is suitable for applications requiring a max operating temperature of 150°C and insulation resistance of 1G ohm.
HBS2PBF5SJ055C
HBS2PBF5SJ055C by C & K Components is a SPDT snap action/limit switch with 150000 cycles electrical life. Featuring PHENOLIC housing and BRASS terminals, it offers IP65 sealing for use in applications requiring momentary switch action and high over travel plunger actuator type. Operating temperature range from -55 to 150 °C with max AC contact current of 1A@125VAC.
6.36
7.26 N
.76 mm
V-10G-1C4-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Body Height: 15.9 mm; Termination Type: QUICK CONNECT;
10A@250VAC
10 A
300000 Cycle(s)
V-10G2-1C4-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Electrical Life: 300000 Cycle(s); AC Maximum Rating R Load (Contact): 10A@250VAC;
3.3 mm
V-10G2-1C5-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Sealing: IP40; Switch Action: MOMENTARY;
V-10G3-1C4-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LONG HINGE LEVER; Maximum Operating Force: .98 N; Termination Type: QUICK CONNECT;
10.8
7.6 mm
V-10G4-1C5-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SIMULATED ROLLER LEVER; Maximum AC Contact Voltage: 250 V; AC Maximum Rating R Load (Contact): 10A@250VAC;
V-10G5-1C5-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE ROLLER LEVER; Maximum AC Contact Current: 10 A; Minimum Operating Temperature: -25 Cel;
V-10G6-1C4-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE ROLLER LEVER; AC Maximum Rating R Load (Contact): 10A@250VAC; Maximum Operating Force: .98 N;
V-15G-1C24-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Maximum Operating Force: .98 N; Maximum Operating Temperature: 80 Cel;
V-15G1-1C24-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE LEVER; Termination Type: QUICK CONNECT; Maximum Operating Temperature: 80 Cel;
V-15G2-1C24-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Switch Action: MOMENTARY; Body Width: 10.3 inch;
V-15G2-1C4-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Termination Type: QUICK CONNECT; Body Length/Diameter: 27.8 mm;
V-15G3-1C24-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LONG HINGE LEVER; Manufacturer Series: V; Body Height: 15.9 mm;
V-15G3-1C5-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LONG HINGE LEVER; Body Width: 10.3 inch; Maximum Operating Force: 1.96 N;
V-15G4-1C5-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SIMULATED ROLLER LEVER; Sealing: IP40; Actuator Travel (mm): 5.6;
© 2023 All rights reserved
