Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
GXE51A2B
Honeywell Sensing And Control
GXE51A2B by Honeywell Sensing And Control is an explosion-proof snap action & limit switch with SPDT function. It has a max operating temperature of 75°C and can handle up to 4A@250VAC. Ideal for applications requiring a side rotary actuator, such as panel mounting in environments where IP66 sealing is necessary.
SIDE ROTARY
4A@250VAC
4 A
250 V
PANEL MOUNT
16 N
75 Cel
-20 Cel
EXPLOSION PROOF; IP66
MOMENTARY
SPDT
SNAP ACTING/LIMIT SWITCH
WIRE
D2HW-A211D
Omron
Omron D2HW-A211D is a SPDT snap action/limit switch with 100000 cycles electrical life. Featuring HINGE LEVER actuator type, it has 1.6mm actuator travel and 0.75N max operating force. Ideal for applications requiring momentary switch action in environments with temperatures ranging from -40°C to 85°C.
1.6
HINGE LEVER
5.3 inch
6.5 mm
13.3 mm
2 A
2A@12VDC
12 V
100000 Cycle(s)
THROUGH HOLE-STRAIGHT
.75 N
85 Cel
-40 Cel
IP50
SOLDER
D2HW-A221D
Omron's D2HW-A221D is a SPDT snap action/limit switch with 100000 cycles electrical life. Featuring IP50 sealing, it has a max operating force of 0.5N and actuator travel of 2.5mm. Ideal for applications requiring momentary switch action, such as in industrial automation systems.
2.5
LONG HINGE LEVER
.5 N
D2HW-BL201H
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Body Length/Diameter: 13.3 mm; Actuator Travel (mm): 1.4;
1.4
PIN PLUNGER
6.5 inch
5.3 mm
THROUGH HOLE-RIGHT ANGLE
D2HW-BL201M
Omron's D2HW-BL201M is a SPDT snap action/limit switch with IP67 sealing. It has an electrical life of 100K cycles, operates b/w -40 to 85°C, and can handle up to 2A@12VDC. Ideal for panel mounting applications requiring momentary switch action with a pin plunger actuator.
IP67
D2HW-BL211DL
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Maximum Operating Force: .75 N; Minimum Operating Temperature: -40 Cel;
D2HW-BL211M
The Omron D2HW-BL211M is a SPDT snap action/limit switch with 100000 cycles electrical life, IP67 sealing, and 1.6mm actuator travel. It operates b/w -40 to 85°C, has a max DC contact voltage of 12V, and a max operating force of 0.75N. Ideal for panel mounting applications requiring momentary switch action in various industries.
D2HW-BL221DL
The Omron D2HW-BL221DL is a snap action and limit switch with a long hinge lever actuator. It has an electrical life of 100,000 cycles and can withstand temperatures ranging from -40°C to 85°C. This switch is commonly used in applications requiring momentary switch action and through-hole right angle mounting.
D2HW-BL221H
Omron's D2HW-BL221H is a SPDT snap action switch with 100000 cycles electrical life. Featuring IP50 sealing, it operates b/w -40 to 85°C. With a long hinge lever actuator, it has a max DC contact voltage of 12V and max operating force of 0.5N, making it ideal for various applications requiring momentary switch action.
D2HW-BL221M
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LONG HINGE LEVER; Maximum DC Contact Current: 2 A; Termination Type: WIRE;
D2HW-BL231DL
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): SIMULATED ROLLER HINGE LEVER; Minimum Operating Temperature: -40 Cel; Maximum Operating Force: .65 N;
1.9
SIMULATED ROLLER HINGE LEVER
D2HW
.65 N
D2HW-BL231H
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): SIMULATED ROLLER LEVER; Body Length/Diameter: 13.3 mm; Actuator Travel (mm): 1.9;
SIMULATED ROLLER LEVER
D2HW-BL231M
Omron's D2HW-BL231M snap action switch has an electrical life of 100,000 cycles and IP67 sealing. With SPDT switch function, it operates b/w -40°C to 85°C. Ideal for panel mounting applications with a simulated roller lever actuator and 1.9mm travel distance.
D2HW-BL261H
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): LEAF LEVER; DC Maximum Rating R Load (Contact): 2A@12VDC; Termination Type: SOLDER;
1.8
LEAF LEVER
1.8 N
D2HW-BL261M
Omron D2HW-BL261M is a snap action switch with SPDT function, 100000 cycles electrical life, and IP67 sealing. It has a 1.8mm actuator travel and operates b/w -40 to 85°C. Ideal for panel mounting applications requiring momentary switch action at a max of 12VDC and 2A current rating.
D2HW-BL271H
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): SIMULATED LEAF LEVER; DC Maximum Rating R Load (Contact): 2A@12VDC; Maximum DC Contact Voltage: 12 V;
2
SIMULATED LEAF LEVER
D2HW-BL271M
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SIMULATED LEAF LEVER; Maximum DC Contact Current: 2 A; Maximum Operating Force: 1.8 N;
D2HW-BL281M
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LONG LEAF LEVER; Switch Action: MOMENTARY; Maximum Operating Force: .9 N;
2.8
LONG LEAF LEVER
.9 N
D2HW-BR201DR
Omron's D2HW-BR201DR is a SPDT snap action switch with 100000 cycle electrical life. Featuring IP50 sealing, it has a max operating force of 0.75N and actuator travel of 1.4mm. Ideal for applications requiring momentary switch action, such as through-hole mounting in electronics with DC contact voltage up to 12V and current rating of 2A@12VDC.
D2HW-BR211DR
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): HINGE LEVER; DC Maximum Rating R Load (Contact): 2A@12VDC; Termination Type: SOLDER;
D2HW-BR211H
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Body Width: 6.5 inch; Electrical Life: 100000 Cycle(s);
D2HW-BR211M
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Body Width: 5.3 inch; Body Height: 6.5 mm;
D2HW-BR221H
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): LONG HINGE LEVER; Actuator Travel (mm): 2.5; DC Maximum Rating R Load (Contact): 2A@12VDC;
D2HW-BR221M
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LONG HINGE LEVER; DC Maximum Rating R Load (Contact): 2A@12VDC; Body Width: 5.3 inch;
D2HW-BR231H
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): SIMULATED ROLLER LEVER; Manufacturer Series: D2HW; Body Height: 5.3 mm;
D2HW-BR231M
Omron's D2HW-BR231M is a SPDT snap action/limit switch with IP67 sealing. It has an electrical life of 100,000 cycles and operates b/w -40°C to 85°C. Ideal for panel mounting applications requiring a max operating force of 0.65N and DC contact voltage of 12V.
D2HW-BR261H
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): LEAF LEVER; Electrical Life: 100000 Cycle(s); Switch Action: MOMENTARY;
D2HW-BR261M
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LEAF LEVER; Minimum Operating Temperature: -40 Cel; Maximum DC Contact Current: 2 A;
D2HW-BR271H
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): SIMULATED LEAF LEVER; Body Width: 6.5 inch; Maximum DC Contact Current: 2 A;
D2HW-BR271M
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SIMULATED LEAF LEVER; Switch Action: MOMENTARY; Body Height: 6.5 mm;
D2HW-BR281M
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LONG LEAF LEVER; Manufacturer Series: D2HW; Actuator Travel (mm): 2.8;
D2HW-C211H
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Maximum DC Contact Current: 2 A; Minimum Operating Temperature: -40 Cel;
18.5 mm
D2HW-C211M
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Maximum Operating Force: .75 N; Minimum Operating Temperature: -40 Cel;
D2HW-C221H
Omron D2HW-C221H is a SPDT snap action/limit switch with 100000 cycles electrical life. Featuring IP50 sealing, it operates b/w -40 to 85°C temperatures. With a max DC contact voltage of 12V and actuator travel of 2.5mm, it is ideal for applications requiring momentary switch action in various industries.
D2HW-C221M
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LONG HINGE LEVER; Minimum Operating Temperature: -40 Cel; Sealing: IP67;
D2HW-C231H
The Omron D2HW-C231H is a SPDT snap action/limit switch with 100000 cycles electrical life. Featuring IP50 sealing, it has a max operating force of 0.65N and actuator travel of 1.9mm. Ideal for applications requiring momentary switch action, such as in industrial machinery or automation systems.
D2HW-C231M
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SIMULATED ROLLER LEVER; Maximum DC Contact Current: 2 A; DC Maximum Rating R Load (Contact): 2A@12VDC;
D2HW-C261M
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LEAF LEVER; Actuator Travel (mm): 1.8; Body Width: 5.3 inch;
D2HW-C271M
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SIMULATED LEAF LEVER; Sealing: IP67; Maximum Operating Force: 1.8 N;
D2HW-C281M
Omron's D2HW-C281M snap action switch has an electrical life of 100k cycles, IP67 sealing, and SPDT switch function. With a body width of 5.3in and actuator travel of 2.8mm, it is ideal for panel mounting applications requiring momentary switch action at temperatures ranging from -40 to 85°C.
D3V-01-1A2-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PLUNGER; Body Width: 10.3 inch; Body Length/Diameter: 27.8 mm;
2.2
PLUNGER
10.3 inch
15.9 mm
27.8 mm
.1A@125VAC
.1 A
.1A@8VDC
125 V
8 V
500000 Cycle(s)
.25 N
-25 Cel
1.2 mm
IP00
QUICK CONNECT
D3V-01-1A2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PLUNGER; Maximum Operating Force: .25 N; Body Height: 15.9 mm;
D3V-01-1A3-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PLUNGER; Maximum DC Contact Voltage: 8 V; Termination Type: QUICK CONNECT;
D3V
.49 N
D3V-01-1A3
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PLUNGER; Maximum Operating Temperature: 85 Cel; Maximum Operating Force: .49 N;
D3V-01-1C22-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PLUNGER; Maximum Operating Temperature: 85 Cel; Body Width: 10.3 inch;
D3V-01-1C23-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PLUNGER; Maximum DC Contact Voltage: 8 V; Body Height: 15.9 mm;
D3V-011-1A3-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE LEVER; Minimum Operating Temperature: -25 Cel; DC Maximum Rating R Load (Contact): .1A@8VDC;
2.4
SHORT HINGE LEVER
1.6 mm
D3V-011-1C23-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE LEVER; Maximum DC Contact Voltage: 8 V; Termination Type: QUICK CONNECT;
© 2023 All rights reserved
