Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Rotary switches are electronic switches that are activated by rotating a dial or knob. They are commonly used in a variety of applications, such as audio equipment, industrial control systems, and consumer electronics.Rotary switches typically consist of a housing, a dial or knob, and a set of electrical contacts. When the dial or knob is rotated, it completes a circuit between the contacts, allowing electrical current to flow through the switch. Some rotary switches also include detents or stops that provide tactile feedback as the dial is rotated.Rotary switches come in different configurations, including single-pole, double-pole, and multi-pole switches. They also come in different contact arrangements, such as make-before-break, break-before-make, and center-off switches.Rotary switches offer several advantages over other types of switches. They provide a simple and intuitive means of controlling circuits, and they offer tactile feedback that can help to ensure reliable operation. They are also highly durable and can withstand frequent use and harsh environments.
Add filters
All
Selected
A22W-2MG-T2-20
Omron
ROTARY SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPST; Type (Actuator): KNOB TYPE; Switch Action: LATCHED; Body Length/Diameter: 34 mm;
KNOB TYPE
48.8 mm
34 mm
90 deg
A22
PANEL MOUNT-THREADED
1
IP65
LATCHED
DPST
ROTARY SWITCH
SCREW
A22W-2MR-24A-20
ROTARY SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPST; Type (Actuator): KNOB TYPE; No. of Switch Sections: 1; Indexing Angle: 90 deg;
A22W-3MR-T2-11
ROTARY SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPST; Type (Actuator): KNOB TYPE; Body Height: 48.8 mm; Body Length/Diameter: 34 mm;
45 deg
P36101
Apem Components
The Apem Components P36101 is a rotary coded switch with 10 positions, featuring a waterproof stainless steel housing. It has an insulation resistance of 100MΩ and operates b/w -50°C to 125°C. Ideal for applications requiring binary coded decimal switch functions in harsh environments.
ARROW SHAPED SLOT
7.4 inch
3.65 mm
7.4 mm
PHOSPHOR BRONZE
GOLD OVER NICKEL
.4 A
.4A@24VDC
BINARY CODED
100 mohm
24 V
STAINLESS STEEL
100000000 ohm
THERMOPLASTIC
e3
P36
THROUGH HOLE-STRAIGHT
10
125 Cel
-50 Cel
6
TUBE
WATERPROOF
BINARY CODED DECIMAL
ROTARY CODED SWITCH
Matte Tin (Sn)
.138 inch
SOLDER
PT65112L254
PT65112L254 by Apem Components is a rotary coded switch with 4 positions and binary coded decimal function. It has a DC max power rating of 1.5VA@24VDC, gold over nickel end contact plating, and operates b/w -20 to 70 °C. Ideal for applications requiring ON-OFF contact function in electronic devices.
0 inch
NYLON
O-RING Si RUBBER ACTUATOR SEAL
6.8 inch
10 mm
1.5VA@24VDC
ON-OFF
80 mohm
BREAK-BEFORE-MAKE
10000 Cycle(s)
e4
PT65
THROUGH HOLE-RIGHT ANGLE
4
70 Cel
-20 Cel
MOLDED
WAVE
Gold (Au) - with Nickel (Ni) barrier
BRASS
SOLVENT
PT65112L508
PT65112L508 by Apem Components is a rotary coded switch with 4 positions and binary coded decimal function. It features gold over nickel plating, phosphor bronze contacts, and thermoplastic insulator material. Ideal for applications requiring ON-OFF contact function at temperatures ranging from -20 to 70°C.
Gold (Au)
PT65301
PT65301 by Apem Components is a rotary coded switch with 10 positions and a binary coded decimal switch function. It has a max DC contact voltage of 24V and an electrical life of 10000 cycles. This switch is commonly used in applications requiring ON-OFF contact function and can withstand temperatures ranging from -20°C to 70°C.
.287 inch
SPINDLE
10 inch
6.5 mm
36 deg
TRAY
.15 inch
PT65503L254
PT65503L254 by Apem Components is a rotary coded switch with 16 positions and HEXADECIMAL function. Featuring GOLD OVER NICKEL plating, it has an electrical life of 10000 cycles and operates at temperatures from -20 to 70 °C. Ideal for applications requiring ON-OFF contact function and solder termination method.
.173 inch
SEGMENT WHEEL
6.5 inch
22.5 deg
16
HEXADECIMAL
PT65706
PT65706 by Apem Components is a 16-position rotary coded switch with BCH COMPLEMENT function. It has a body width of 10mm, height of 6.5mm, and operates b/w -20°C to 70°C. Ideal for applications requiring latched switch action, it features a cross-shaped slot actuator and matte tin terminal finish for solder termination in through-hole mounting setups.
CROSS SHAPED SLOT
BCH COMPLEMENT
7814G-1-023E
Bourns
The Bourns 7814G-1-023E is a SPDT rotary switch with 2 positions, copper alloy terminals, and 2000 cycles electrical life. It has a max operating temperature of 125°C and insulation resistance of 100MΩ. Ideal for applications requiring a latched rotary switch with surface mount straight mounting feature.
LIQUID CRYSTAL POLYMER
ROTARY
ROHS COMPLIANT, TAPE PKG
4.5 inch
2.55 mm
4.5 mm
.1A@16VAC
.1 A
.1A@16VDC
2 mohm
16 V
250VAC
2000 Cycle(s)
SURFACE MOUNT-STRAIGHT
2
-55 Cel
TAPE AND REEL
SPDT
TIN
COPPER ALLOY
7814G-1-051E
Bourns 7814G-1-051E is a SPDT rotary switch with 2 positions, suitable for applications requiring a max AC contact current of 0.1A@16VAC. With a body width of 4.5mm and height of 2.55mm, it operates in temperatures ranging from -55°C to 125°C, making it ideal for surface mount-straight mounting.
Tin (Sn)
7814Z-1-051E
Bourns 7814Z-1-051E Rotary Switch, SPDT type with 2 positions. Features include 5.01" body width, 5.76mm height, and -55 to 125°C operating temperature range. Ideal for surface mount-right angle applications requiring a latched switch function.
5.01 inch
5.76 mm
5.6 mm
SURFACE MOUNT-RIGHT ANGLE
43A01110N-A01110N
Grayhill
Grayhill's 43A01110N-A01110N Rotary Switch offers 6000 cycles electrical life, SP10T switch function, and 1A max AC contact current. Ideal for applications requiring a latched switch action, with concentric shaft type actuator and panel mount-threaded mounting feature.
CONCENTRIC SHAFT TYPE
IT CONTAINS ONE MORE SECTION OF SWITCH
46.18 mm
25.4 mm
1A@115VAC
1 A
1A@28VDC
115 V
28 V
6000 Cycle(s)
SP10T
43A02110N-A02110N
Grayhill's 43A02110N-A02110N Rotary Switch offers 6000 cycles electrical life, SP10T switch function, and 2 switch sections. With a max AC contact current of 1A@115VAC, it is ideal for applications requiring a latched rotary switch with solder termination and panel mount-threaded mounting feature.
63.75 mm
44A30-06-1-12N-F
Grayhill's 44A30-06-1-12N-F is a rotary switch with 6 sections, SP12T function, and 12 positions. It has an electrical life of 6000 cycles and can handle up to 1A current at 28VDC/115VAC. Ideal for panel mounting applications requiring latched switch action in various industries.
SINGLE SHAFT TYPE
76.33 mm
29.51 mm
30 deg
12
SP12T
44MB45-01-2-04N
Grayhill's 44MB45-01-2-04N is a DP4T rotary switch with 4 positions, max AC contact current of 0.075A@115VAC, and DC contact current of 0.025A@28VDC. Ideal for panel mounting applications requiring a latched switch action with single shaft actuator type.
26.04 mm
.075A@115VAC
.075 A
.025 A
.025A@28VDC
DP4T
44S30-06-1-12N-F
Grayhill's 44S30-06-1-12N-F is a rotary switch with 6 sections and SP12T function. It has a max AC contact voltage of 115V and DC contact current of 1A. This panel-mounted switch, with a latched switch action, is commonly used in applications requiring multiple positions and high electrical life.
A6R-101RF
ROTARY CODED SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SP10T; Type (Actuator): FLAT TYPE; Body Length/Diameter: 9.9 mm; Maximum DC Contact Current: .025 A;
FLAT TYPE
9.8 inch
9.9 mm
.025A@24VDC
5000 Cycle(s)
80 Cel
-25 Cel
DUST PROOF
A6R-101RS
ROTARY CODED SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SP10T; Type (Actuator): EXTENDED SHAFT TYPE; No. of Switch Sections: 1; Minimum Operating Temperature: -25 Cel;
EXTENDED SHAFT TYPE
A6R-161RF
ROTARY CODED SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SP16T; Type (Actuator): FLAT TYPE; Body Width: 9.8 inch; Minimum Operating Temperature: -25 Cel;
SP16T
A6R-161RS
ROTARY CODED SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SP16T; Type (Actuator): EXTENDED SHAFT TYPE; Sealing: DUST PROOF; Packing Method: TUBE;
A6R-162RF
Omron A6R-162RF is a rotary coded switch with 16 positions and SP16T function. It has an electrical life of 5000 cycles, dust-proof sealing, and operates b/w -25 to 80°C. Ideal for applications requiring a latched switch action, it features a max DC contact voltage of 24V and termination via soldering.
A6R-162RS
ROTARY CODED SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SP16T; Type (Actuator): EXTENDED SHAFT TYPE; Termination Type: SOLDER; No. of Positions: 16;
A6RV-101RF
Omron A6RV-101RF is a rotary coded switch with 10 positions, SP10T function, and 5000 cycles electrical life. It operates b/w -25°C to 80°C, with a max DC contact voltage of 24V and current rating of 0.025A@24VDC. Ideal for applications requiring dust-proof sealing, it features a latched switch action and solder termination in a compact design suitable for through-hole-right angle mounting.
6.64 inch
9.8 mm
A6RV-101RS
ROTARY CODED SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SP10T; Type (Actuator): EXTENDED SHAFT TYPE; Maximum DC Contact Voltage: 24 V; Maximum DC Contact Current: .025 A;
A6RV-161RF
Omron A6RV-161RF is a rotary coded switch with 16 positions, SP16T function, and 5000 cycles electrical life. It has a dust-proof sealing, operates b/w -25°C to 80°C, and supports 0.025A@24VDC current. Ideal for applications requiring through-hole-right angle mounting and solder termination.
A6RV-161RS
ROTARY CODED SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SP16T; Type (Actuator): EXTENDED SHAFT TYPE; No. of Positions: 16; Maximum Operating Temperature: 80 Cel;
A6RV-162RS
ROTARY CODED SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SP16T; Type (Actuator): EXTENDED SHAFT TYPE; Body Height: 9.9 mm; Termination Type: SOLDER;
A165S-A2A-1
Omron A165S-A2A-1 is a rotary switch with SPDT function, IP65 sealing, and 100000 cycles electrical life. Ideal for panel mounting applications, it has a max AC contact current of 5A@125VAC and operates b/w -10 to 55°C temperatures.
15.8 inch
21.1 mm
18 mm
5A@125VAC
5 A
3 A
3A@30VDC
125 V
30 V
100000 Cycle(s)
A165S
PANEL MOUNT
55 Cel
-10 Cel
A165S-A2A-2
ROTARY SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): KNOB TYPE; Body Length/Diameter: 18 mm; No. of Switch Sections: 1;
DPDT
A165S-A2M-1
ROTARY SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): KNOB TYPE; Manufacturer Series: A165S; No. of Switch Sections: 1;
A165S-A2M-2
ROTARY SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): KNOB TYPE; No. of Positions: 2; Electrical Life: 100000 Cycle(s);
A165S-A3A-2
ROTARY SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): SQUARE TYPE; Maximum DC Contact Voltage: 30 V; Body Length/Diameter: 18 mm;
SQUARE TYPE
10.3 mm
3
MOMENTARY
A165S-A3M-2
ROTARY SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): KNOB TYPE; No. of Positions: 2; DC Maximum Rating R Load (Contact): 3A@30VDC;
A165S-J2A-1
ROTARY SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): KNOB TYPE; Color (Actuator): BLACK; Manufacturer Series: A165S;
BLACK
.291 inch
A165S-J2A-2
ROTARY SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): KNOB TYPE; Termination Type: SOLDER; Manufacturer Series: A165S;
A165S-J2M-1
ROTARY SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): KNOB TYPE; Color (Actuator): BLACK; Switch Action: LATCHED;
A165S-J2M-2
ROTARY SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): KNOB TYPE; DC Maximum Rating R Load (Contact): 3A@30VDC; Minimum Operating Temperature: -10 Cel;
A165S-J3A-2
ROTARY SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): RECTANGULAR TYPE; Termination Type: SOLDER; Electrical Life: 100000 Cycle(s);
RECTANGULAR TYPE
A165S-J3M-2
ROTARY SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): KNOB TYPE; Maximum AC Contact Current: 5 A; No. of Switch Sections: 1;
A165S-T2A-1
ROTARY SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): KNOB TYPE; Maximum DC Contact Current: 3 A; Body Width: 15.8 inch;
A165S-T2A-2
ROTARY SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): KNOB TYPE; Sealing: IP65; Maximum AC Contact Voltage: 125 V;
A165S-T2M-1
ROTARY SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): KNOB TYPE; Maximum AC Contact Voltage: 125 V; Termination Type: SOLDER;
A165S-T2M-2
ROTARY SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): KNOB TYPE; AC Maximum Rating R Load (Contact): 5A@125VAC; Maximum AC Contact Voltage: 125 V;
A165S-T3A-2
ROTARY SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): ROUND TYPE; Body Length/Diameter: 18 mm; Minimum Operating Temperature: -10 Cel;
ROUND TYPE
A165S-T3M-2
ROTARY SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): KNOB TYPE; Termination Type: SOLDER; Maximum AC Contact Current: 5 A;
A165W-A2AG-24D-1
ROTARY SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): KNOB TYPE; AC Maximum Rating R Load (Contact): 5A@125VAC; Maximum DC Contact Current: 3 A;
A165W
A165W-A2AG-24D-2
ROTARY SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): KNOB TYPE; Maximum DC Contact Current: 3 A; Minimum Operating Temperature: -10 Cel;
© 2023 All rights reserved
