Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
A22L-GA-24A-10M
Omron
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): ROUND/CLEAR FULL-GUARD TYPE; Switch Action: MOMENTARY; Body Height: 54.7 mm;
ROUND/CLEAR FULL-GUARD TYPE
30 inch
54.7 mm
36 mm
24 V
500000 Cycle(s)
A22
PANEL MOUNT
55 Cel
-20 Cel
IP65
MOMENTARY
SPST
PUSHBUTTON SWITCH
SCREW
A22L-GA-24A-11M
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): ROUND/CLEAR FULL-GUARD TYPE; Maximum AC Contact Voltage: 24 V; Switch Action: MOMENTARY;
A22L-GG-24A-10M
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPST; Type (Actuator): ROUND/FULL-GUARD TYPE; Manufacturer Series: A22; Maximum DC Contact Current: 10 A;
ROUND/FULL-GUARD TYPE
47 mm
10A@110VAC
10 A
10A@24VDC
110 V
GREEN LED
PANEL MOUNT-THREADED
A22L-GR-24A-10M
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPST; Type (Actuator): ROUND/FULL-GUARD TYPE; Sealing: IP65; Switch Action: MOMENTARY;
RED LED
A22L-GW-24A-10M
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): ROUND/CLEAR FULL-GUARD TYPE; Body Length/Diameter: 36 mm; Electrical Life: 500000 Cycle(s);
A22L-GY-24A-10M
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): ROUND/CLEAR FULL-GUARD TYPE; Body Height: 54.7 mm; Termination Type: SCREW;
A22L-HG-24A-10M
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPST; Type (Actuator): ROUND/HALF-GUARD TYPE; Maximum DC Contact Voltage: 24 V; Body Length/Diameter: 36 mm;
ROUND/HALF-GUARD TYPE
A22L-TG-24A-01M
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPST; Type (Actuator): ROUND/PROJECTION TYPE; Body Length/Diameter: 36 mm; Body Height: 47 mm;
0 deg
ROUND/PROJECTION TYPE
Lighted (Round Type)
A22L-TG-24A-10M
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPST; Type (Actuator): ROUND/PROJECTION TYPE; Switch Action: MOMENTARY; Body Height: 47 mm;
A22L-TR-24A-01M
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPST; Type (Actuator): ROUND/PROJECTION TYPE; Illumination: RED LED; Maximum DC Contact Current: 10 A;
MP0037/2
Bulgin
The Bulgin MP0037/2 pushbutton switch features IP68 sealing, 30,000 electrical life cycles, and 1000VAC dielectric withstand volts. Ideal for applications requiring a momentary SPST switch with 1A@50VAC/DC contact ratings. Made of glass-filled nylon insulator material with stainless steel actuator for durability in harsh environments.
.15 inch
STAINLESS STEEL
BUTTON TYPE
28 mm
21.5 mm
1A@50VAC
1 A
1A@50VDC
10 mohm
MAKE-BEFORE-BREAK
50 V
1000VAC
30000 Cycle(s)
100000000000 ohm
GLASS FILLED NYLON
e4
7.5 N
70 Cel
IP68
SILVER
BRASS
MP0037/3
Bulgin MP0037/3 is a SPST pushbutton switch with 30000 cycles electrical life. Featuring 1P68 sealing, it has an insulation resistance of 100000000000 ohm. Ideal for panel mounting applications, it operates b/w -20 to 70 °C with max current ratings of 1A@50VAC/DC.
.142 inch
DOMED TYPE
MP
1P68
TP33P008000
Apem Components
TP33P008000 by Apem Components is a SPST pushbutton switch with 60000 cycles electrical life. Featuring brass terminals, gold plating, and polybutylene terephthalate insulator material, it operates b/w -30 to 85 °C. Ideal for applications requiring momentary switch action in environments where solvent washability is needed.
.139 inch
GLASS FILLED POLYAMIDE
.7874
STANDARD PLUNGER
5 inch
8.1 mm
.196 inch
.24 inch
GOLD
0.4VA@20VAC
.02A@20VAC
.02 A
.02A@20VDC
OFF-(ON)
50 mohm
20 V
60000 Cycle(s)
1000000000 ohm
POLYBUTYLENE TEREPHTHALATE
THROUGH HOLE-STRAIGHT
85 Cel
-30 Cel
3
BULK
EPOXY TERMINAL SEALED
WAVE
Gold (Au)
.129 inch
SOLDER
SOLVENT
TP33WW08000
TP33WW08000 by Apem Components is a SPST pushbutton switch with 60000 cycles electrical life. Featuring gold-plated brass terminals, it has a max operating temperature of 85°C and can handle up to 0.02A at 20VAC/DC. Ideal for applications requiring momentary switch action in electronic devices with through-hole mounting requirements.
ROHS COMPLIANT
8.65 mm
8.58 mm
.225 inch
TP
THROUGH HOLE-RIGHT ANGLE
4
1213MAUL-CSA
1213MAUL-CSA by Apem Components is a SPST pushbutton switch with electrical life of 10000 cycles. Featuring a flat plunger actuator, it has max AC contact current of 8A@125VAC and DC contact current of 8A@12VDC. Ideal for panel mount-threaded applications in various industries due to its momentary switch action and quick connect termination type.
FLAT PLUNGER
14 inch
21.2 mm
17 mm
8A@125VAC
8 A
8A@12VDC
125 V
12 V
10000 Cycle(s)
1200M
QUICK CONNECT
1213MC
1213MC by Apem Components is a SPST pushbutton switch with electrical life of 10,000 cycles. It has a body width of 14" and body height of 21.2mm, suitable for panel mount-threaded applications. With max AC contact current of 3A@125VAC and DC contact current of 3A@12VDC, it operates in temperatures ranging from -20°C to 55°C.
3A@125VAC
3 A
3A@12VDC
ESE20D323
Panasonic
The Panasonic ESE20D323 is a SPST pushbutton switch with 3N max operating force and 0.1A@14VDC DC max rating. Featuring a lever actuator, it has TIN COPPER terminal finish and solder termination type. Ideal for applications requiring momentary-tactile switch action in electronics or industrial equipment.
LEVER
7.8 inch
8.9 mm
7.9 mm
.1 A
.1A@14VDC
14 V
e2
3 N
BAG; BOX
MOMENTARY-TACTILE
TIN COPPER
A165E-M-01
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPST; Electrical Life: 100000 Cycle(s); AC Maximum Rating R Load (Contact): 5A@125VAC; Maximum AC Contact Voltage: 125 V;
15.8 inch
10.3 mm
18 mm
5A@125VAC
5 A
3A@30VDC
30 V
100000 Cycle(s)
A165E
14.7 N
-10 Cel
A165E-S-01
Omron A165E-S-01 is a SPST pushbutton switch with 100000 cycles electrical life, IP65 sealing, and 100M ohm insulation resistance. Ideal for panel mounting applications requiring momentary switch action in environments with temperatures ranging from -10 to 55°C.
.787 inch
PUSHBUTTON
11.2 mm
.63 inch
M16X1
(N.O.) (N.C.)
2000VAC
100000000 ohm
.256 inch
MP0042/1
The Bulgin MP0042/1 is a SPST pushbutton switch with 100000 cycle electrical life and 1000000000 ohm insulation resistance. Featuring a flush dome actuator, it has a max DC contact voltage of 48V and is ideal for panel mount applications requiring momentary switch action.
.079 inch
FLUSH DOME
20.3 mm
16.2 mm
.236 inch
2 A
2A@48VDC
48 V
STEEL
MP0042
MP0042/3
The Bulgin MP0042/3 is a SPST pushbutton switch with 100000 cycle electrical life and 1000000000 ohm insulation resistance. Featuring a prominent button type actuator, it has a max DC contact voltage of 48V and is ideal for panel mount applications in various industries.
.122 inch
PROMINENT BUTTON TYPE
W23-X1A1G-10
TE Connectivity
TE Connectivity's W23-X1A1G-10 is a black pushbutton switch with SPST function. It has 10A@250VAC AC and 10A@50VDC DC max ratings, suitable for panel mount applications. With momentary switch action and solder termination, it offers reliable performance in various electronic devices.
BLACK
17.53 inch
40.64 mm
35.15 mm
10A@250VAC
10A@50VDC
250 V
W23-X1A1G-15
TE Connectivity's W23-X1A1G-15 is a black SPST pushbutton switch with 17.53" width, 40.64mm height, and 35.15mm length/diameter. It has a max AC contact current of 15A@250VAC and DC contact voltage of 50VDC, making it ideal for panel mount applications requiring momentary switch action.
15A@250VAC
15 A
15A@50VDC
W23-X1A1G-25
TE Connectivity's W23-X1A1G-25 is a black pushbutton switch with SPST function. It has a max AC contact current of 25A@250VAC and DC contact voltage of 50V. Ideal for panel mount applications, this momentary switch features solder termination type.
25A@250VAC
25 A
25A@50VDC
W23-X1A1G-35
TE Connectivity's W23-X1A1G-35 is a black pushbutton switch with SPST function. It has a max AC contact current of 35A@250VAC and DC contact voltage of 35A@50VDC. Ideal for panel mount applications, this momentary switch features solder termination type.
35A@250VAC
35 A
35A@50VDC
W23-X1A1G-4
TE Connectivity's W23-X1A1G-4 is a black pushbutton switch with SPST function. It has a max AC contact current of 4A@250VAC and DC contact voltage of 50V. Ideal for panel mount applications, this momentary switch features solder termination and compact dimensions (17.53" x 40.64mm x 35.15mm).
4A@250VAC
4 A
4A@50VDC
P27A-BL
Carling Technologies
Carling Technologies P27A-BL is a SPST pushbutton switch with 25,000 cycles electrical life and 100M ohm insulation resistance. With a max AC contact current of 6A@125VAC, it is ideal for panel mount applications requiring OFF-(ON) contact function. The switch features a PHENOLIC insulator material and operates within a temperature range of 0-85°C.
.25 inch
NYLON
BLACK CONCAVE BUTTON
13.3 inch
13.76 mm
30.04 mm
.468 inch
.562 inch
15/32-32
6A@125VAC
6 A
SLOW-MAKE/-BREAK
25000 Cycle(s)
PHENOLIC
7.23 N
0 Cel
LATCHED AND MOMENTARY
A22-DR-11M
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): SQUARE/FULL-GUARD TYPE; Body Length/Diameter: 36 mm; Sealing: IP65;
SQUARE/FULL-GUARD TYPE
Non-lighted (Square Type)
MSPM101C104
TE Connectivity's MSPM101C104 is a red pushbutton switch with hermetically sealed steel housing. It features SPST switch function, 1.9453N max operating force, and 0.1A@50VDC DC rating. Ideal for panel mount applications requiring momentary action switches with extended actuator type.
RED
.316 inch
POLYAMIDE
EXTENDED TYPE
GOLD OVER NICKEL
.1A@50VDC
COPPER ALLOY
1
1.9453 N
HERMETICALLY SEALED
WIRE
MSP103C204
TE Connectivity's MSP103C204 is a red pushbutton switch with SPST function. It has a max AC contact current of 3A and DC contact current of 3A, suitable for panel mount applications. The switch features a round/extended actuator made of polyethylene and copper alloy end contact material plated with silver.
.098 inch
POLYETHYLENE
ROUND/EXTENDED TYPE
.234 inch
PHENOL RESIN
MSP103B04
TE Connectivity's MSP103B04 is a black pushbutton switch with SPST function. It has a max AC contact current of 3A and DC contact current of 3A, suitable for panel mounting applications. The switch features a round/extended actuator made of polyethylene and copper alloy end contacts plated with silver.
.235 inch
TPF11CGPC004
TE Connectivity's TPF11CGPC004 is a black pushbutton switch with polyester housing and epoxy terminal sealing. It features SPST switch function, 0.4A AC contact current, 20V DC contact voltage, and gold over nickel center contact plating. Ideal for panel mounting applications requiring a max operating force of 3.92N.
.17 inch
.4 A
POLYESTER
3.92 N
1825106-4
TE Connectivity's 1825106-4 is a black pushbutton switch with nylon housing. It has SPST switch function, 100000 cycles electrical life, and 1.568N max operating force. Ideal for panel mounting applications in various industries due to its momentary-tactile switch action and solder termination type.
.055 inch
RECTANGULAR TYPE
4 inch
1.7 mm
5.6 mm
.05 A
.05A@12VDC
1.568 N
TR
IPR1SAD2101
The Apem Components IPR1SAD2101 is a SPST pushbutton switch with EPOXY TERMINAL SEALING, IP67 rating, and 10000 cycles electrical life. It operates b/w -40 to 85 °C with max AC contact current of 2A@125VAC. Ideal for panel mounting applications requiring a latched switch action.
ROUND/FLAT TYPE
24.2 mm
12 mm
2A@125VAC
.1A@24VDC
IP
6.5 N
-40 Cel
EPOXY TERMINAL SEALED; IP67
LATCHED
9533NCDK
9533NCDK by Apem Components is a SPST pushbutton switch with electrical life of 250,000 cycles. With dust and water proof sealing, it has a max DC contact voltage of 30V and operates b/w -30°C to 65°C. Ideal for panel mounting applications requiring momentary switch action.
6.1 mm
6.5 mm
.1A@30VDC
250000 Cycle(s)
65 Cel
DUST PROOF; WATER PROOF
IPR3SAD2101
The Apem Components IPR3SAD2101 is a SPST pushbutton switch with IP67 sealing, suitable for panel mount applications. It has an electrical life of 500K cycles, operates b/w -40°C to 125°C, and supports 0.5A@48VAC AC max rating. Ideal for industrial control panels and outdoor equipment due to its durable construction and reliable performance.
13.2 mm
.5A@48VAC
.5 A
.2 A
.2A@50VDC
5 N
125 Cel
IPR3SAD2104
The Apem Components IPR3SAD2104 is a SPST pushbutton switch with IP67 sealing, suitable for panel mounting. It has an electrical life of 500K cycles and operates b/w -40°C to 125°C. With a max AC contact current of 0.5A and DC contact current of 0.2A, it is ideal for applications requiring momentary-tactile switch action in harsh environments.
90030
Littelfuse
Littelfuse 90030 is a SPST pushbutton switch with SILVER terminals. It has a max DC contact voltage of 12V and current rating of 35A@12VDC. Ideal for panel mount applications, offering OFF-(ON) momentary switch function.
.38 inch
1.35 mm
1.12 mm
5/8-32
35A@12VDC
8444K2
Eaton Corporation
The Eaton Corporation 8444K2 is a SPST pushbutton switch with dimensions of 15.75" x 23.88mm x 30.99mm. It has a max operating force of 4N and can handle up to 15A@125VAC. Ideal for panel mounting applications requiring momentary switch action in temperatures ranging from -16°C to 66°C.
15.75 inch
23.88 mm
30.99 mm
15A@125VAC
4 N
66 Cel
-16 Cel
C31007
C31007 by Eaton Corporation is a SPST pushbutton switch with 25000 cycles electrical life. It features corrosion and moisture-proof sealing, a plunger actuator type, and latched switch action. With a max operating force of 11.12N, it is ideal for panel mount-threaded applications in temperatures ranging from -40°C to 70°C.
PLUNGER
22.2 mm
10A@125VAC
10A@28VDC
28 V
C3100
11.12 N
CORROSION PROOF; MOISTURE PROOF
MSPS103B
TE Connectivity's MSPS103B is a black pushbutton switch with SPST function. Featuring 10000 cycles electrical life, it has a 2.4892mm actuator travel and operates b/w -20 to 80°C. Ideal for applications requiring momentary ON-OFF contact functions in various industries.
.2 inch
THERMOPLASTIC
2.4892
26.67 mm
10.16 mm
.245 inch
1/4-40
0.5A@125VAC
(ON)-OFF
100 mohm
BREAK-BEFORE-MAKE
80 Cel
HAND
.22 inch
MSPS103C0
TE Connectivity's MSPS103C0 is a black pushbutton switch with SPST function. It has an electrical life of 10k cycles, insulation resistance of 1G ohm, and can handle up to 0.5A AC current. Ideal for applications requiring momentary switch action in temperatures ranging from -20°C to 80°C.
1825099-1
TE Connectivity's 1825099-1 is a black pushbutton switch with a polyethylene housing and epoxy terminal sealing. It features SPST switch function, gold over nickel plating, and a max operating force of 3.92N. Ideal for panel mounting applications requiring momentary switch action at up to 20V DC and 0.4A current.
.158 inch
ISF15ACP4
Nkk Switches
ISF15ACP4 by Nkk Switches is a SPST pushbutton switch with LED illumination. It has an electrical life of 1000000 cycles and insulation resistance of 100M ohm, suitable for applications requiring momentary switch action at temperatures ranging from -20 to 70°C.
1.778
0.1A@12VDC
200 mohm
125VAC
1000000 Cycle(s)
LED
14
EPOXY
.13 inch
A165E-SY-01
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPST; Body Width: 15.8 inch; Maximum AC Contact Voltage: 125 V; Maximum DC Contact Voltage: 30 V;
A22E-M-01B
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Electrical Life: 300000 Cycle(s); Maximum Operating Temperature: 70 Cel; Termination Type: WIRE;
34 mm
300000 Cycle(s)
A22E
A22E-M-11B
Omron A22E-M-11B is a pushbutton switch with IP65 sealing, SPST function, and 300000 cycles electrical life. It has a max AC contact current of 10A@110VAC and DC contact voltage of 24V. Ideal for panel mounting applications requiring momentary switch action in environments with temperatures ranging from -20°C to 70°C.
A22EL-M-6A-01
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPST; Type (Actuator): MEDIUM TYPE; Maximum Operating Temperature: 55 Cel; Termination Type: SCREW;
MEDIUM TYPE
41.2 mm
10A@24VAC
A22EL
© 2023 All rights reserved
