Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
A16L-TRA-24D-2
Omron
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): ROUND TYPE; Manufacturer Series: A16; AC Maximum Rating R Load (Contact): 5A@125VAC;
ROUND TYPE
15.8 inch
21.1 mm
18 mm
5A@125VAC
5 A
3 A
3A@30VDC
125 V
30 V
100000 Cycle(s)
RED LED
A16
PANEL MOUNT
4.41 N
55 Cel
-10 Cel
IP40
ALTERNATE
DPDT
PUSHBUTTON SWITCH
SOLDER
A16L-TRA-5D-2
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): ROUND TYPE; Body Height: 21.1 mm; AC Maximum Rating R Load (Contact): 5A@125VAC;
A16L-TRM-12D-2
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): ROUND TYPE; Maximum AC Contact Voltage: 125 V; Maximum AC Contact Current: 5 A;
MOMENTARY
A16L-TRM-24D-2
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): ROUND TYPE; Termination Type: SOLDER; Maximum DC Contact Voltage: 30 V;
A16L-TRM-5-2
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): ROUND TYPE; Manufacturer Series: A16; Switch Action: MOMENTARY;
RED LAMP
A16L-TRM-5D-2
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): ROUND TYPE; Minimum Operating Temperature: -10 Cel; Body Width: 15.8 inch;
A16L-TRM-T2-2S
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): ROUND TYPE; Maximum AC Contact Voltage: 125 V; Maximum DC Contact Current: 3 A;
SCREW
A9PS26-0012
Omron A9PS26-0012 is a DPDT pushbutton switch with 50000 cycles electrical life. It has IP64 sealing, 5.6" body width, and operates b/w -20 to 85°C. Ideal for applications requiring momentary switch action with 4.9N max operating force and solder termination type.
0 deg
.13 inch
PUSHBUTTON
5.6 inch
5 mm
7 mm
.062 inch
.1A@28VAC
.1 A
.1A@28VDC
OFF-(ON)
80 mohm
28 V
500VAC
50000 Cycle(s)
500000000 ohm
THROUGH HOLE-RIGHT ANGLE
4.9 N
85 Cel
-20 Cel
TRAY
IP64
.102 inch
A9PS26-0013
PUSHBUTTON SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: DPDT; Type (Actuator): PUSHBUTTON; Contact Function: OFF-(ON); Minimum Operating Temperature: -20 Cel;
5.5 inch
5.6 mm
A3PA-90C12-28
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): SQUARE TYPE; Body Width: 32 inch; DC Maximum Rating R Load (Contact): 3A@30VDC;
SQUARE TYPE
32 inch
25 mm
52 mm
200000 Cycle(s)
A3P
5.88 N
50 Cel
QUICK CONNECT/SOLDER
A3PA-90D11-06
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): SQUARE TYPE; Maximum AC Contact Voltage: 125 V; Termination Type: QUICK CONNECT/SOLDER;
6.86 N
A3PJ-90C11-24EG
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): RECTANGULAR TYPE; Electrical Life: 200000 Cycle(s); Maximum Operating Force: 5.88 N;
RECTANGULAR TYPE
GREEN LED
40 Cel
A3PJ-90C11-24EW
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): RECTANGULAR TYPE; Maximum Operating Force: 5.88 N; Manufacturer Series: A3P;
WHITE LED
A3PJ-90D11-24EG
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): RECTANGULAR TYPE; Electrical Life: 200000 Cycle(s); Maximum AC Contact Current: 5 A;
MPG206RPC
TE Connectivity
TE Connectivity's MPG206RPC is a DPDT pushbutton switch with 50,000 electrical life cycles. Featuring gold flash terminal finish and silver over copper end contact material, it has a max AC contact current of 6A@250VAC. Ideal for panel mounting applications, this switch operates b/w -20 to 80°C temperatures.
NATURAL
.315 inch
PHENOL RESIN
3.5052
EXTENDED TYPE
PANEL MOUNTABLE
12.954 inch
33.147 mm
12.954 mm
.469 inch
15/32-32
GOLD OVER SILVER
3A@250VAC
6 A
4A@28VDC
10 mohm
BREAK-BEFORE-MAKE
250 V
1500VRMS
SILVER OVER COPPER
GOLD
THERMOSET
1000000000 ohm
THERMOSET 94V-0
1
11.9952 N
80 Cel
6
BULK
MOLDED
HAND
Gold Flash (Au)
.245 inch
COPPER ALLOY
WIRE
SOLVENT
MB2061SS1W01-CA
Nkk Switches
MB2061SS1W01-CA by Nkk Switches is a DPDT pushbutton switch with a black stainless steel housing. It has an electrical life of 25,000 cycles and insulation resistance of 1G ohm. Ideal for applications requiring momentary switch action in environments with temperatures ranging from -15°C to 85°C.
BLACK
.406 inch
POLYSTYRENE
1.8034
12.7 inch
40.3352 mm
13.0048 mm
.25 inch
.335 inch
1/4-40
SILVER
ON-(ON)
SLOW-MAKE/-BREAK
1500VAC
25000 Cycle(s)
STAINLESS STEEL
DIALLYL PHTHALATE
-15 Cel
EPOXY
WAVE
.157 inch
SOLDER LUG
UB25SKW03N-C
UB25SKW03N-C by Nkk Switches is a red pushbutton switch with glass-filled reinforced nylon housing. It features DPDT switch function, 2.31mm actuator travel, and quick-make/-break contact timing. Ideal for applications requiring momentary ON-(ON) contact function in electronic devices or industrial equipment.
RED
.098 inch
POLYCARBONATE
2.3114
15.24 inch
16.4846 mm
15.24 mm
5A@250VAC
5A@30VDC
50 mohm
QUICK-MAKE/-BREAK
10000 Cycle(s)
GLASS FILLED REINFORCED NYLON
200000000 ohm
GLASS FILLED DIALLYL PHTHALATE
THROUGH HOLE-STRAIGHT
70 Cel
BRASS
UB25SKW03N-G
PUSHBUTTON SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: DPDT; Type (Actuator): PUSHBUTTON; Contact Function: ON-(ON); Solderability: WAVE;
BLUE
A16L-AYM-5D-2
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): PUSHBUTTON; Contact Function: OFF-(ON); Maximum DC Contact Voltage: 30 V;
YELLOW
.366 inch
3.302
HIGH RELIABILITY
18.0086 inch
21.1074 mm
10.3124 mm
.425 inch
M16X1
SNAP ACTION
1000VAC
LED
100000000 ohm
0
.291 inch
8442WCDB
Apem Components
The Apem Components 8442WCDB is a DPDT pushbutton switch with stainless steel housing. It has an electrical life of 30,000 cycles and insulation resistance of 1G ohm. Ideal for applications requiring momentary switch action, such as control panels or industrial machinery.
NICKEL
.248 inch
2.6924
11 inch
12 mm
13.2 mm
.275 inch
0.4VA@20VAC
.02A@20VAC
.02 A
.02A@20VDC
20 V
1000VRMS
30000 Cycle(s)
e4
-40 Cel
8
EPOXY TERMINAL SEALED
.145 inch
A3U-TBA-A2C-M
PUSHBUTTON SWITCH; Switch Function: DPDT; Type (Actuator): PUSHBUTTON; Angle (Actuator): 0 deg; Contact Resistance: 250 mohm; Minimum Operating Temperature: -20 Cel;
.079 inch
IP40 PROTECTION
29.9974 mm
0.1A@30VDC
250 mohm
A3U
A3U-TBB-A2C-M
PUSHBUTTON SWITCH; Switch Function: DPDT; Type (Actuator): PUSHBUTTON; Minimum Operating Temperature: -20 Cel; Length (Actuator): .079 inch; Body Length/Diameter: 29.9974 mm;
A3U-TBG-A2C-M
PUSHBUTTON SWITCH; Switch Function: DPDT; Type (Actuator): PUSHBUTTON; Electrical Life: 200000 Cycle(s); Maximum Operating Temperature: 70 Cel; Minimum Operating Temperature: -20 Cel;
GREEN
A3U-TBR-A2C-M
PUSHBUTTON SWITCH; Switch Function: DPDT; Type (Actuator): PUSHBUTTON; Maximum DC Contact Current: .1 A; Contact Resistance: 250 mohm; Maximum Operating Temperature: 70 Cel;
A3U-TBW-A2C-M
PUSHBUTTON SWITCH; Switch Function: DPDT; Type (Actuator): PUSHBUTTON; Maximum Operating Temperature: 70 Cel; Length (Actuator): .079 inch; Additional Features: IP40 PROTECTION;
WHITE
A3U-TBY-A2C-M
PUSHBUTTON SWITCH; Switch Function: DPDT; Type (Actuator): PUSHBUTTON; Electrical Life: 200000 Cycle(s); Additional Features: IP40 PROTECTION; DC Maximum Rating R Load (Contact): 0.1A@30VDC;
A3UL-TBA-1A2C-M
PUSHBUTTON SWITCH; Switch Function: DPDT; Type (Actuator): PUSHBUTTON; Electrical Life: 200000 Cycle(s); Maximum Operating Temperature: 70 Cel; DC Maximum Rating R Load (Contact): 0.1A@30VDC;
A3UL-TBA-2A2C-M
PUSHBUTTON SWITCH; Switch Function: DPDT; Type (Actuator): PUSHBUTTON; Insulation Resistance: 100000000 ohm; Electrical Life: 200000 Cycle(s); Body Length/Diameter: 29.9974 mm;
A3UL-TBA-3A2C-M
PUSHBUTTON SWITCH; Switch Function: DPDT; Type (Actuator): PUSHBUTTON; Maximum Operating Temperature: 70 Cel; DC Maximum Rating R Load (Contact): 0.1A@30VDC; Maximum DC Contact Current: .1 A;
A3UL-TBG-1A2C-M
PUSHBUTTON SWITCH; Switch Function: DPDT; Type (Actuator): PUSHBUTTON; Body Length/Diameter: 29.9974 mm; DC Maximum Rating R Load (Contact): 0.1A@30VDC; Maximum Operating Temperature: 70 Cel;
A3UL-TBG-2A2C-M
PUSHBUTTON SWITCH; Switch Function: DPDT; Type (Actuator): PUSHBUTTON; Maximum DC Contact Voltage: 30 V; Maximum DC Contact Current: .1 A; Minimum Operating Temperature: -20 Cel;
A3UL-TBG-3A2C-M
PUSHBUTTON SWITCH; Switch Function: DPDT; Type (Actuator): PUSHBUTTON; Angle (Actuator): 0 deg; Maximum DC Contact Current: .1 A; Maximum DC Contact Voltage: 30 V;
A3UL-TBR-1A2C-M
PUSHBUTTON SWITCH; Switch Function: DPDT; Type (Actuator): PUSHBUTTON; Insulation Resistance: 100000000 ohm; Additional Features: IP40 PROTECTION; Electrical Life: 200000 Cycle(s);
A3UL-TBR-2A2C-M
PUSHBUTTON SWITCH; Switch Function: DPDT; Type (Actuator): PUSHBUTTON; Length (Actuator): .079 inch; Illumination: LED; DC Maximum Rating R Load (Contact): 0.1A@30VDC;
A3UL-TBR-3A2C-M
PUSHBUTTON SWITCH; Switch Function: DPDT; Type (Actuator): PUSHBUTTON; Maximum Operating Temperature: 70 Cel; Manufacturer Series: A3U; Angle (Actuator): 0 deg;
A3UL-TBW-1A2C-M
PUSHBUTTON SWITCH; Switch Function: DPDT; Type (Actuator): PUSHBUTTON; Color (Actuator): WHITE; Manufacturer Series: A3U; Insulation Resistance: 100000000 ohm;
A3UL-TBW-2A2C-M
PUSHBUTTON SWITCH; Switch Function: DPDT; Type (Actuator): PUSHBUTTON; Manufacturer Series: A3U; DC Maximum Rating R Load (Contact): 0.1A@30VDC; Maximum DC Contact Current: .1 A;
A3UL-TBW-3A2C-M
PUSHBUTTON SWITCH; Switch Function: DPDT; Type (Actuator): PUSHBUTTON; Manufacturer Series: A3U; Illumination: LED; Body Length/Diameter: 29.9974 mm;
A3UL-TBY-1A2C-M
PUSHBUTTON SWITCH; Switch Function: DPDT; Type (Actuator): PUSHBUTTON; Insulation Resistance: 100000000 ohm; Contact Resistance: 250 mohm; Color (Actuator): YELLOW;
A3UL-TBY-2A2C-M
PUSHBUTTON SWITCH; Switch Function: DPDT; Type (Actuator): PUSHBUTTON; Electrical Life: 200000 Cycle(s); Length (Actuator): .079 inch; Maximum Operating Temperature: 70 Cel;
A3UL-TBY-3A2C-M
PUSHBUTTON SWITCH; Switch Function: DPDT; Type (Actuator): PUSHBUTTON; Illumination: LED; Additional Features: IP40 PROTECTION; Maximum DC Contact Voltage: 30 V;
DS2D6CQ1
C & K Components
DS2D6CQ1 by C & K Components is a DPDT pushbutton switch with POLYAMIDE housing and COPPER ALLOY terminals. With 50000 cycles electrical life, it's ideal for applications requiring momentary switch action, such as panel-mounted control panels in industrial settings. Operating b/w -40 to 85°C, it offers reliable performance with 10A@250VAC AC contact current rating.
POLYAMIDE
13.3096 inch
24.6126 mm
39.8018 mm
SILVER ALLOY
0.3HP@250VAC
10A@250VAC
10 A
30 mohm
DS
QUICK CONNECT
DS2D6CQ2
DS2D6CQ2 by C & K Components is a DPDT pushbutton switch with POLYAMIDE housing and COPPER ALLOY terminals. It has an electrical life of 50,000 cycles and insulation resistance of 100M ohm. Ideal for applications requiring momentary switch action, such as panel-mounted control systems in industrial settings.
YB26WCKW01-1F24-JB
YB26WCKW01-1F24-JB by Nkk Switches is a DPDT pushbutton switch with a green LED illumination. It has a housing made of glass-filled polyamide and terminal material of phosphor bronze. With an electrical life of 100000 cycles, it is suitable for panel mounting applications requiring a max AC contact voltage of 250V and DC contact current of 3A.
.327 inch
3
STANDARDS: CSA; UL
17 mm
15 mm
.63 inch
.37 inch
M16P1
ON-ON
GLASS FILLED POLYAMIDE
e3
2.94 N
-25 Cel
EPOXY TERMINAL SEALED; IP65
TIN
.288 inch
PHOSPHOR BRONZE
LP0125CCKW01A
The Nkk Switches LP0125CCKW01A is a DPDT pushbutton switch with 50,000 electrical life cycles. Featuring glass-filled polyamide housing and insulator material, it offers 3A@125VAC max AC contact current. Ideal for applications requiring momentary ON-(ON) contact function, such as control panels and industrial machinery.
.217 inch
2.9972
.629 inch
3A@125VAC
LP01
.287 inch
AML21BBA2AC
Honeywell Sensing And Control
Honeywell Sensing And Control's AML21BBA2AC is a DPDT pushbutton switch with 25000 cycles electrical life. It has a body width of 18.92mm and max DC contact voltage of 24V, suitable for panel mount applications requiring momentary switch action at 2A@24VDC load.
BUTTON TYPE
18.92 inch
36 mm
18.92 mm
2 A
2A@24VDC
24 V
AML21BBA2AD
Honeywell Sensing And Control's AML21BBA2AD is a DPDT pushbutton switch with 25000 cycles electrical life. It has a body width of 18.92mm and max DC contact voltage of 24V, suitable for panel mount applications requiring a latched switch action at 2A@24VDC load.
LATCHED
AML21BBA2BC
AML21BBA2BC by Honeywell Sensing And Control is a DPDT pushbutton switch with electrical life of 100,000 cycles. It has a body width of 18.92mm and max AC/DC contact current of 0.1A@125V. Ideal for panel mounting applications requiring momentary switch action.
.1A@125VAC
.1A@125VDC
© 2023 All rights reserved
