Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
MSPS103C0
TE Connectivity
TE Connectivity's MSPS103C0 is a black pushbutton switch with SPST function. It has an electrical life of 10k cycles, insulation resistance of 1G ohm, and can handle up to 0.5A AC current. Ideal for applications requiring momentary switch action in temperatures ranging from -20°C to 80°C.
0 deg
BLACK
.2 inch
THERMOPLASTIC
2.4892
ROUND/EXTENDED TYPE
26.67 mm
10.16 mm
.245 inch
1/4-40
SILVER
0.5A@125VAC
.5 A
OFF-(ON)
100 mohm
BREAK-BEFORE-MAKE
125 V
1000VAC
10000 Cycle(s)
1000000000 ohm
PANEL MOUNT-THREADED
80 Cel
-20 Cel
BULK
HAND
MOMENTARY
SPST
PUSHBUTTON SWITCH
.22 inch
SOLDER
SOLVENT
A165E-SY-01
Omron
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPST; Body Width: 15.8 inch; Maximum AC Contact Voltage: 125 V; Maximum DC Contact Voltage: 30 V;
15.8 inch
11.2 mm
18 mm
5A@125VAC
5 A
3 A
3A@30VDC
30 V
100000 Cycle(s)
A165E
14.7 N
55 Cel
-10 Cel
IP65
A22E-M-03
Omron A22E-M-03 is a 3PST pushbutton switch with IP65 sealing, suitable for panel mounting. It has an electrical life of 300K cycles and can handle up to 10A@24VAC/DC. Ideal for applications requiring momentary switch action in environments with temperatures ranging from -20°C to 70°C.
MEDIUM TYPE
34 mm
41.2 mm
10A@24VAC
10 A
10A@24VDC
24 V
300000 Cycle(s)
A22E
70 Cel
3PST
SCREW
A22E-S-03
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: 3PST; Type (Actuator): SMALL TYPE; Maximum AC Contact Voltage: 24 V; Maximum Operating Temperature: 70 Cel;
SMALL TYPE
A22E-S12
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: 3PST; Type (Actuator): SMALL TYPE; Maximum Operating Temperature: 70 Cel; AC Maximum Rating R Load (Contact): 10A@24VAC;
A22EL-M-6A-01
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPST; Type (Actuator): MEDIUM TYPE; Maximum Operating Temperature: 55 Cel; Termination Type: SCREW;
RED LED
A22EL
A2A-4A
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPDT; Body Height: 16.4 mm; Termination Type: SOLDER; Switch Action: MOMENTARY;
14 inch
16.4 mm
19.8 mm
5A@125VDC
200000 Cycle(s)
A2A
1.47 N
-25 Cel
IP00
SPDT
A2A-4B
Omron A2A-4B Pushbutton Switch offers 200000 cycles Electrical Life, SPDT Switch Function, and IP00 Sealing. Ideal for applications requiring a momentary switch with 5A@125VAC/DC contact ratings. Suitable for panel mounting with threaded termination, operating b/w -25°C to 80°C temperature range.
A2A-4G
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPDT; Electrical Life: 200000 Cycle(s); Maximum DC Contact Current: 5 A; Maximum AC Contact Current: 5 A;
A2A-4R
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPDT; Termination Type: SOLDER; Body Height: 16.4 mm; Body Length/Diameter: 19.8 mm;
A2A-4W
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPDT; Body Height: 16.4 mm; Maximum DC Contact Voltage: 125 V; Switch Action: MOMENTARY;
A2A-4Y
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPDT; Body Length/Diameter: 19.8 mm; Maximum AC Contact Voltage: 125 V; Manufacturer Series: A2A;
A22E-M-01-EMO
Omron A22E-M-01-EMO is a pushbutton switch with IP65 sealing, SPST function, and 300000 cycles electrical life. It operates at -20 to 70 °C, supports 10A@24VAC/DC, and has a screw termination. Ideal for panel mounting applications requiring momentary switch action.
A22E-M-02-EMO
Omron A22E-M-02-EMO is a DPST pushbutton switch with IP65 sealing, 300000 cycles electrical life, and 10A@24VAC/DC contact ratings. It has a body height of 34mm and screw termination type. Ideal for panel mounting applications requiring momentary switch action in temperatures ranging from -20°C to 70°C.
DPST
A22E-M-02-EMS
Omron A22E-M-02-EMS is a DPST pushbutton switch with IP65 sealing, suitable for panel mounting. It has an electrical life of 300k cycles and can handle up to 10A@24VAC/DC. Ideal for applications requiring momentary switch action in temperatures ranging from -20°C to 70°C.
A22E-M-03-EMO
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: 3PST; Type (Actuator): MEDIUM TYPE; Maximum AC Contact Voltage: 24 V; Body Length/Diameter: 41.2 mm;
A22E-M-03-EMS
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: 3PST; Type (Actuator): MEDIUM TYPE; Electrical Life: 300000 Cycle(s); Body Length/Diameter: 41.2 mm;
A22E-M-11-EMO
Omron A22E-M-11-EMO is a pushbutton switch with SPST function, IP65 sealing, and 300000 electrical life cycles. It operates at temperatures ranging from -20 to 70 °C and supports up to 10A@24VAC/DC. Ideal for panel mounting applications requiring momentary switch action.
A22E-M-12-EMO
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: 3PST; Type (Actuator): MEDIUM TYPE; Switch Action: MOMENTARY; Maximum AC Contact Voltage: 24 V;
A22E-M-12-EMS
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: 3PST; Type (Actuator): MEDIUM TYPE; AC Maximum Rating R Load (Contact): 10A@24VAC; Manufacturer Series: A22E;
MP0013/2
Bulgin
Bulgin's MP0013/2 pushbutton switch features SPST function, 1A@50VAC AC rating, and environmentally sealed design. Ideal for panel mounting applications requiring momentary switch action with stainless steel actuator. With brass terminals and glass-filled nylon insulator, it ensures high insulation resistance of 10^10 ohm.
.185 inch
STAINLESS STEEL
PUSHBUTTON
15 mm
19.2 mm
COPPER
1A@50VAC
1 A
15 mohm
MAKE-BEFORE-BREAK
50 V
2500VAC
10000000000 ohm
GLASS FILLED NYLON
e4
MP0013
85 Cel
ENVIRONMENTALLY SEALED
BRASS
IPR3SAD6L0S
Apem Components
The Apem Components IPR3SAD6L0S is a red LED pushbutton switch with SPST function. It has an electrical life of 70,000 cycles and insulation resistance of 1,000,000,000 ohm. Ideal for applications requiring a corrosion-proof and epoxy-sealed switch with IP67 sealing.
RED
.078 inch
POLYAMIDE 6/6
1.7
ROUND CURVED TYPE
13.2 mm
12 mm
.472 inch
.196 inch
GOLD
.5A@48VAC
5A@28VDC
48 V
28 V
1500VRMS
70000 Cycle(s)
POLYETHYLENE
6 N
-40 Cel
CORROSION PROOF; EPOXY TERMINAL SEALED; IP67
MOMENTARY-TACTILE
.204 inch
MPI002/28/GN/24
The Bulgin MPI002/28/GN/24 is a round button type pushbutton switch with a green LED illumination. It has an electrical life of 35k cycles and is sealed to IP66, making it suitable for use in harsh environments. With a max DC contact voltage of 24V and a max current rating of 0.05A, it is commonly used for panel mounting applications requiring momentary switch action.
ROUND BUTTON TYPE
32.7 mm
22 mm
.05 A
.05A@24VDC
35000 Cycle(s)
GREEN LED
-30 Cel
IP66
QUICK CONNECT
9533NCDK-0
9533NCDK-0 by Apem Components is a SPST pushbutton switch with 250,000 cycles electrical life. Featuring flush plunger actuator, it has a max DC contact voltage of 30V and operates b/w -30°C to 65°C. Ideal for panel mounting applications requiring momentary switch action.
FLUSH PLUNGER
6.1 mm
6.5 mm
.1 A
.1A@30VDC
250000 Cycle(s)
65 Cel
EPOXY TERMINAL SEALED
MPI002/28/GN/12
The Bulgin MPI002/28/GN/12 is a pushbutton switch with an electrical life of 35k cycles. It features a green LED illumination and has an IP66 sealing rating. This switch is commonly used in panel mount applications and can handle a max DC contact voltage of 24V.
BUTTON TYPE
MP0016
The Bulgin MP0016 is a black pushbutton switch with brass terminals, SPST switch function, and silver end contact plating. With an insulation resistance of 10^10 ohm, it is ideal for applications requiring momentary switch action at temperatures ranging from -20 to 85 °C. Suitable for panel mounting, this button-type switch has a max AC/DC contact current of 1A@28V and dielectric withstand voltage of 2000VAC.
.252 inch
18.3 mm
9.9 mm
.126 inch
1A@28VAC
1A@28VDC
2000VAC
IPR3SAD2L0G
IPR3SAD2L0G by Apem Components is a SPST pushbutton switch with GREEN LED illumination. It has an electrical life of 70k cycles, sealed with EPOXY and rated IP67/IP68K for rugged environments. Ideal for panel mounting applications requiring momentary-tactile switch action in temperatures ranging from -40 to 85°C.
6.4 mm
8 N
EPOXY TERMINAL SEALED; IP67; IP68K
3-101-001
Schurter Ag
The Schurter Ag 3-101-001 is a stainless steel pushbutton switch with an electrical life of 20,000 cycles. It offers corrosion-proof and environmentally sealed housing, suitable for applications requiring IK07 sealing. With SPST switch function, it has a max AC contact current of 16A@250VAC and DC contact current of 16A@30VDC, making it ideal for panel mount-threaded installations.
.051 inch
5.2
16.6 inch
19.7 mm
.866 inch
.72 inch
M22X1.0
16A@250VAC
16 A
16A@30VDC
250 V
20000 Cycle(s)
100000000 ohm
10 N
BOX
CORROSION PROOF; ENVIRONMENTALLY SEALED; IK07
LATCHED
.327 inch
9532CD
The Apem Components 9532CD is a SPST pushbutton switch with PA9T housing and BRASS terminals. It has an electrical life of 100,000 cycles and insulation resistance of 1,000,000,000 ohms. Ideal for applications requiring momentary switch action in temperatures ranging from -30 to 65°C.
.137 inch
GLASS FILLED POLYAMIDE
1.75
PLUNGER
8 mm
.165 inch
.118 inch
0.1A@30VDC
30000 mohm
1000VRMS
PA9T
SOLDER LUG
MPI002/28/RD/24
Bulgin's MPI002/28/RD/24 is a stainless steel pushbutton switch with red LED illumination. It has an electrical life of 35,000 cycles and sealing rating of IP66. Ideal for applications requiring momentary-tactile switch action in environments with temperatures ranging from -30 to 70°C.
.59 inch
POLYAMIDE
e3
Tin (Sn)
COPPER ALLOY
IXP5S12M
The Apem Components IXP5S12M is a black pushbutton switch with thermoplastic housing and silver terminals. It has an electrical life of 100,000 cycles and insulation resistance of 1,000,000,000 ohms. Ideal for applications requiring IP67/IP69K sealing, such as panel-mounted devices needing a momentary DPST switch with a max operating force of 9N.
.189 inch
SILICONE
ROUND TYPE
17 mm
16.3 mm
.433 inch
.427 inch
2 A
2A@28VDC
2100VAC
9 N
EPOXY TERMINAL SEALED; IP67; IP69K
Silver (Ag)
.222 inch
A165E-S-03U-S
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: 3PST; Type (Actuator): PUSHBUTTON; Maximum Operating Force: 14.7 N; Length (Actuator): .807 inch;
.807 inch
3.5
21.5 mm
16 mm
M16X1
1A@125VAC
1A@30VDC
.236 inch
© 2023 All rights reserved
