Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
MB2011LS1W01-CA
Nkk Switches
The Nkk Switches MB2011LS1W01-CA is a black pushbutton switch with stainless steel housing. It has SPDT switch function, 3A@250VAC AC max rating, and 10 mohm contact resistance. Ideal for panel mounting applications requiring momentary ON-(ON) contact timing.
0 deg
BLACK
.457 inch
POLYCARBONATE
4.445
PUSHBUTTON
7.8994 inch
41.6306 mm
13.0048 mm
.25 inch
.335 inch
1/4-40
SILVER
3A@250VAC
3 A
ON-(ON)
10 mohm
SLOW-MAKE/-BREAK
250 V
1500VAC
25000 Cycle(s)
STAINLESS STEEL
1000000000 ohm
DIALLYL PHTHALATE
PANEL MOUNT
85 Cel
-15 Cel
3
EPOXY
WAVE
MOMENTARY
SPDT
PUSHBUTTON SWITCH
.157 inch
COPPER ALLOY
SOLDER LUG
MB2011SB1W01-CA
MB2011SB1W01-CA by Nkk Switches is a black pushbutton switch with stainless steel housing. It has SPDT switch function, 3A@250VAC AC max rating, and 1000000000 ohm insulation resistance. Ideal for panel mounting applications requiring momentary ON-(ON) contact function.
.523 inch
POLYSTYRENE
1.8034
42.2656 mm
.472 inch
M12P1
e4
M
GOLD OVER NICKEL/SILVER
MB2011SB1W01-CC
MB2011SB1W01-CC by Nkk Switches is a red pushbutton switch with stainless steel housing. It has SPDT switch function, 3A@250VAC AC max rating, and 10 mohm contact resistance. Ideal for panel mount applications requiring momentary ON-(ON) contact function.
RED
MB2011SB1W01-DA
MB2011SB1W01-DA by Nkk Switches is a black pushbutton switch with stainless steel housing. It has SPDT switch function, 3A@250VAC AC max rating, and 10 mohm contact resistance. Ideal for panel mounting applications, it offers momentary switch action and slow-make/-break contact timing.
.59 inch
43.9674 mm
MB2011SB1W01-DC
MB2011SB1W01-DC by Nkk Switches is a red pushbutton switch with stainless steel housing. It has SPDT switch function, 3A@250VAC AC max rating, and 10 mohm contact resistance. Ideal for panel mounting applications, it offers momentary switch action and slow-make/-break contact timing.
MB2011SB1W01-DF
MB2011SB1W01-DF by Nkk Switches is a GREEN pushbutton switch with STAINLESS STEEL housing. It has SPDT switch function, 3A@250VAC AC max rating, and 1000000000 ohm insulation resistance. Ideal for applications requiring momentary ON-(ON) contact function in temperatures ranging from -15 to 85 °C.
GREEN
MB2011SS1W01-BA
MB2011SS1W01-BA by Nkk Switches is a SPDT pushbutton switch with stainless steel housing. It has an electrical life of 25,000 cycles and insulation resistance of 1,000,000,000 ohms. Ideal for applications requiring a momentary ON-(ON) contact function at temperatures ranging from -15 to 85°C.
NICKEL
.118 inch
38.8366 mm
SILVER ALLOY
MB2000
MB2011SS1W01-CA
MB2011SS1W01-CA by Nkk Switches is a black pushbutton switch with stainless steel housing. It has SPDT switch function, 3A@250VAC AC max rating, and 1000000000 ohm insulation resistance. Ideal for panel mounting applications requiring momentary ON-(ON) contact function.
.406 inch
40.3352 mm
MB2061SS1W01-CA
MB2061SS1W01-CA by Nkk Switches is a DPDT pushbutton switch with a black stainless steel housing. It has an electrical life of 25,000 cycles and insulation resistance of 1G ohm. Ideal for applications requiring momentary switch action in environments with temperatures ranging from -15°C to 85°C.
12.7 inch
6
DPDT
UB25SKW03N-C
UB25SKW03N-C by Nkk Switches is a red pushbutton switch with glass-filled reinforced nylon housing. It features DPDT switch function, 2.31mm actuator travel, and quick-make/-break contact timing. Ideal for applications requiring momentary ON-(ON) contact function in electronic devices or industrial equipment.
.098 inch
2.3114
15.24 inch
16.4846 mm
15.24 mm
5A@250VAC
5 A
5A@30VDC
50 mohm
QUICK-MAKE/-BREAK
30 V
10000 Cycle(s)
GLASS FILLED REINFORCED NYLON
200000000 ohm
GLASS FILLED DIALLYL PHTHALATE
THROUGH HOLE-STRAIGHT
70 Cel
-20 Cel
BRASS
SOLDER
UB25SKW03N-G
PUSHBUTTON SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: DPDT; Type (Actuator): PUSHBUTTON; Contact Function: ON-(ON); Solderability: WAVE;
BLUE
8442WCDB
Apem Components
The Apem Components 8442WCDB is a DPDT pushbutton switch with stainless steel housing. It has an electrical life of 30,000 cycles and insulation resistance of 1G ohm. Ideal for applications requiring momentary switch action, such as control panels or industrial machinery.
.248 inch
2.6924
11 inch
12 mm
13.2 mm
.275 inch
GOLD
0.4VA@20VAC
.02A@20VAC
.02 A
.02A@20VDC
20 V
1000VRMS
30000 Cycle(s)
THROUGH HOLE-RIGHT ANGLE
-40 Cel
8
BULK
EPOXY TERMINAL SEALED
.145 inch
GB15JPD
The Nkk Switches GB15JPD is a SPDT pushbutton switch with LED illumination. It has a max DC contact voltage of 28V and an electrical life of 50,000 cycles. Ideal for applications requiring momentary switch action, such as control panels and industrial equipment.
CLEAR
.193 inch
.177 inch
.213 mm
.276 mm
.079 inch
.13 inch
PHOSPHOR BRONZE
0.4VA@28VAC
0.1A@28VAC
.1 A
0.4VA@28VDC
0.1A@28VDC
80 mohm
28 V
500VAC
50000 Cycle(s)
GLASS FILLED POLYAMIDE
LED
500000000 ohm
55 Cel
-25 Cel
.102 inch
MB2511S2G13-BA
MB2511S2G13-BA by Nkk Switches is a SPDT pushbutton switch with gold-plated contacts, suitable for applications requiring momentary switch action. Featuring stainless steel housing and solder termination, it offers an electrical life of 100000 cycles and operates within a temperature range of -30 to 85°C. With a compact design and high insulation resistance, this switch is ideal for various electronic devices.
.346 inch
.9906
7.874 inch
12.7 mm
.244 inch
.3 inch
COPPER
30 mohm
SNAP ACTION
1000VAC
100000 Cycle(s)
-30 Cel
7
.189 inch
SOLVENT
MB2511S4G03-BA
MB2511S4G03-BA by Nkk Switches is a SPDT pushbutton switch with gold-plated contacts, suitable for applications requiring momentary switch action. Featuring stainless steel housing and a 0.4VA@28VDC power rating, it offers reliable performance in temperatures ranging from -30 to 85 °C. With an actuator travel of 0.9906mm and snap action contact timing, this switch is ideal for PCBs with 3 mounting holes.
.307 inch
CAP COLOUR- BLACK
10.3124 mm
.236 inch
.315 inch
M6P0.75
104350003
The Apem Components 104350003 is a SPDT pushbutton switch with brass housing, offering 50000 cycles electrical life and 1000000000 ohm insulation resistance. Ideal for applications requiring dust-proof, water-proof sealing, it has a max DC contact voltage of 24V and operates b/w -40 to 85 °C temperatures.
CHROME
.196 inch
8 inch
14 mm
.393 inch
.433 inch
M10X0.75
3A@24VDC
24 V
PANEL MOUNT-THREADED
DUST PROOF; EPOXY TERMINAL SEALED; WATER PROOF
LB15WKW01-CJ
LB15WKW01-CJ by Nkk Switches is a SPDT pushbutton switch with GLASS FILLED POLYAMIDE housing and PHOSPHOR BRONZE terminals. It has an electrical life of 100,000 cycles and insulation resistance of 200M ohm. Ideal for applications requiring momentary ON-(ON) contact function at temperatures ranging from -25 to 70°C.
.197 inch
2.9972
9.4996 mm
24.9936 mm
M22P1
LIQUID CRYSTAL POLYMER
.295 inch
YB15CKG01-1F05-JA
YB15CKG01-1F05-JA by Nkk Switches is a SPDT pushbutton switch with green LED illumination. It has an electrical life of 100,000 cycles and insulation resistance of 200M ohm. Ideal for applications requiring momentary switch action, such as panel mounting in electronic devices.
.327 inch
STANDARDS: CSA; UL
17 mm
15 mm
.63 inch
.37 inch
M16P1
0.014A@28VAC
.014 A
0.014A@28VDC
100 mohm
BREAK-BEFORE-MAKE
GREEN LED
e3
1.47 N
50 Cel
TIN
.288 inch
QUICK CONNECT
YB15MKG01-1C02-JA
YB15MKG01-1C02-JA by Nkk Switches is a SPDT pushbutton switch with red LED illumination. It has an electrical life of 100,000 cycles and insulation resistance of 200M ohm. Ideal for applications requiring momentary switch action, such as panel mounting in electronic devices.
RED LED
YB15MKG01-2CF05-JB
YB15MKG01-2CF05-JB by Nkk Switches is a SPDT pushbutton switch with green/red LED illumination. It has an electrical life of 100,000 cycles and insulation resistance of 200M ohm. Ideal for applications requiring momentary switch action, such as panel mounting in electronic devices.
GREEN/RED LED
YB15MKG01-5C-JC
YB15MKG01-5C-JC by Nkk Switches is a SPDT pushbutton switch with red LED illumination. Featuring gold-plated contacts, it has an electrical life of 100000 cycles and insulation resistance of 200M ohm. Ideal for applications requiring momentary switch action in environments with temperatures ranging from -25 to 50°C.
YB15MKG01-5F-JF
YB15MKG01-5F-JF by Nkk Switches is a SPDT pushbutton switch with green LED illumination. It has an electrical life of 100,000 cycles and insulation resistance of 200M ohm. Ideal for applications requiring momentary switch action, such as panel mounting in electronic devices.
YB15MKG01-5F05-JB
YB15MKG01-5F05-JB by Nkk Switches is a SPDT pushbutton switch with 100000 cycles electrical life. Featuring green LED illumination, it has a max operating force of 1.47N and operates at temperatures ranging from -25 to 50°C. Ideal for applications requiring momentary ON-(ON) contact function and quick connect termination.
YB15MKG01-5F12-JF
YB15MKG01-5F12-JF by Nkk Switches is a SPDT pushbutton switch with green LED illumination. It has an electrical life of 100,000 cycles and insulation resistance of 200M ohm. Ideal for applications requiring momentary switch action, such as panel mounting in electronic devices.
YB15MKG01-6B-JB
YB15MKG01-6B-JB by Nkk Switches is a SPDT pushbutton switch with 100000 cycles electrical life. It features GLASS FILLED POLYAMIDE housing, PHOSPHOR BRONZE terminals, and WHITE LED illumination. Ideal for applications requiring momentary ON-(ON) contact function, such as panel mounting in electronic devices.
WHITE LED
YB15MKG01-6F-JB
YB15MKG01-6F-JB by Nkk Switches is a SPDT pushbutton switch with green LED illumination. It has an electrical life of 100,000 cycles and insulation resistance of 200M ohm. Ideal for applications requiring momentary switch action, such as panel mounting in electronic devices.
YB15MKG01-6G-JB
YB15MKG01-6G-JB by Nkk Switches is a SPDT pushbutton switch with 100000 cycles electrical life. Featuring blue LED illumination, it has gold-plated contacts and operates at temperatures ranging from -25 to 50 °C. Ideal for applications requiring momentary ON-(ON) contact function and quick connect termination.
BLUE LED
YB15RKG01-2CF12-JB
YB15RKG01-2CF12-JB by Nkk Switches is a SPDT pushbutton switch with GREEN/RED LED illumination. It has an electrical life of 100000 cycles, insulation resistance of 200M ohm, and operates b/w -25 to 50°C. Ideal for applications requiring momentary switch action and panel mounting in various industries.
YB15RKG01-6B-JB
YB15RKG01-6B-JB by Nkk Switches is a SPDT pushbutton switch with 100000 cycles electrical life. Featuring white LED illumination, it has a max DC contact voltage of 28V and operates b/w -25 to 50 °C. Ideal for panel mounting applications, it offers momentary switch action with quick connect termination type.
YB15RKG01-6G-JB
YB15RKG01-6G-JB by Nkk Switches is a SPDT pushbutton switch with blue LED illumination. It has an electrical life of 100,000 cycles and insulation resistance of 200M ohm. Ideal for applications requiring momentary switch action, such as panel mounting in electronic devices.
YB15RKW01-1F24-JA
YB15RKW01-1F24-JA by Nkk Switches is a SPDT pushbutton switch with GLASS FILLED POLYAMIDE housing and PHOSPHOR BRONZE terminals. Featuring GREEN LED illumination, it has an electrical life of 100000 cycles. Ideal for applications requiring momentary switch action, such as panel mounting in electronic devices.
3A@30VDC
YB15RKW01-2CF12-JB
YB15RKW01-2CF12-JB by Nkk Switches is a SPDT pushbutton switch with 100000 cycles electrical life. Featuring green/red LED illumination, it has a max operating temperature of 50°C and can handle 3A@250VAC AC max rating R load. Ideal for panel mount applications requiring momentary switch action.
YB15RKW01-2CF24-JB
YB15RKW01-2CF24-JB by Nkk Switches is a SPDT pushbutton switch with GREEN/RED LED illumination. It has 100000 cycles electrical life, 200M ohm insulation resistance, and operates at -25 to 50 °C. Ideal for panel mounting applications requiring momentary ON-(ON) contact function.
YB15RKW01-5C-JB
YB15RKW01-5C-JB by Nkk Switches is a SPDT pushbutton switch with red LED illumination. It has an electrical life of 100,000 cycles and insulation resistance of 200M ohm. Ideal for applications requiring momentary switch action, such as panel mounting in electronic devices.
YB15RKW01-5C-JC
YB15RKW01-5C-JC by Nkk Switches is a SPDT pushbutton switch with red LED illumination. It has an electrical life of 100,000 cycles and insulation resistance of 200M ohm. Ideal for applications requiring momentary switch action, such as panel mounting in electronic devices.
YB15RKW01-5D-JB
YB15RKW01-5D-JB by Nkk Switches is a pushbutton switch with a housing made of glass-filled polyamide. It has an electrical life of 100,000 cycles and features an amber LED illumination. This switch is commonly used in panel mount applications and can handle a max AC contact voltage of 250V.
AMBER LED
YB15RKW01-5F12-JB
YB15RKW01-5F12-JB by Nkk Switches is a SPDT pushbutton switch with GLASS FILLED POLYAMIDE housing and PHOSPHOR BRONZE terminals. It has GREEN LED illumination, 100000 cycle electrical life, and 200M ohm insulation resistance. Ideal for applications requiring momentary switch action, such as panel mounting in electronic devices.
YB15RKW01-5F12-JF
YB15RKW01-5F12-JF by Nkk Switches is a SPDT pushbutton switch with GLASS FILLED POLYAMIDE housing and PHOSPHOR BRONZE terminals. It features GREEN LED illumination, 100000 cycle electrical life, and 200M ohm insulation resistance. Ideal for applications requiring momentary ON-(ON) contact function, such as panel mounting in electronic devices.
YB15WRKG01-1CF02-JB
YB15WRKG01-1CF02-JB by Nkk Switches is a SPDT pushbutton switch with GLASS FILLED POLYAMIDE housing and PHOSPHOR BRONZE terminals. It has GREEN/RED LED illumination, 100000 cycles electrical life, and IP65 sealing. Ideal for applications requiring momentary ON-(ON) contact function in environments with temperatures ranging from -25 to 50 °C.
1.67 N
EPOXY TERMINAL SEALED; IP65
YB15WRKG01-1F05-JB
YB15WRKG01-1F05-JB by Nkk Switches is a SPDT pushbutton switch with green LED illumination. It has an electrical life of 100,000 cycles and insulation resistance of 200M ohm. Ideal for applications requiring momentary switch action, panel mounting, and quick connect termination.
YB15WRKG01-1F12-JB
Nkk Switches YB15WRKG01-1F12-JB is a SPDT pushbutton switch with GLASS FILLED POLYAMIDE housing and PHOSPHOR BRONZE terminals. It has GREEN LED illumination, IP65 sealing, and 100000 cycle electrical life. Ideal for applications requiring momentary ON-(ON) contact function, such as panel mounting in industrial equipment.
YB15WRKG01-2CF02-JB
YB15WRKG01-2CF02-JB by Nkk Switches is a SPDT pushbutton switch with GLASS FILLED POLYAMIDE housing, PHOSPHOR BRONZE terminals, and GREEN/RED LED illumination. It has an electrical life of 100000 cycles, IP65 sealing, and operates b/w -25 to 50 °C. Ideal for applications requiring momentary ON-(ON) contact function with a max AC/DC contact voltage of 28V and quick connect termination.
YB15WRKG01-5C-JB
Nkk Switches YB15WRKG01-5C-JB is a SPDT pushbutton switch with red LED illumination. It has an electrical life of 100,000 cycles and insulation resistance of 200M ohm. Ideal for applications requiring momentary switch action, such as panel mounting in industrial equipment.
YB15WRKG01-5C-JC
YB15WRKG01-5C-JC by Nkk Switches is a SPDT pushbutton switch with red LED illumination. It has an electrical life of 100,000 cycles and insulation resistance of 200M ohm. Ideal for applications requiring momentary switch action, such as panel mounting in electronic devices.
YB15WRKG01-5C24-JC
YB15WRKG01-5C24-JC by Nkk Switches is a SPDT pushbutton switch with red LED illumination. It has an electrical life of 100,000 cycles and insulation resistance of 200M ohm. Ideal for applications requiring momentary switch action, such as panel mounting in electronic devices.
YB15WRKG01-5F-JB
YB15WRKG01-5F-JB by Nkk Switches is a SPDT pushbutton switch with green LED illumination. It has an electrical life of 100,000 cycles and insulation resistance of 200M ohm. Ideal for applications requiring momentary switch action, such as panel mounting in electronic devices.
YB15WRKG01-5F-JF
YB15WRKG01-5F-JF by Nkk Switches is a SPDT pushbutton switch with green LED illumination and gold-plated contacts. With an electrical life of 100,000 cycles and IP65 sealing, it is ideal for applications requiring momentary switch action in environments with temperatures ranging from -25 to 50°C.
YB15WRKG01-5F05-JF
YB15WRKG01-5F05-JF by Nkk Switches is a SPDT pushbutton switch with green LED illumination. It has an electrical life of 100,000 cycles and insulation resistance of 200M ohm. Ideal for applications requiring momentary switch action, such as panel mounting in electronic devices.
© 2023 All rights reserved
