Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
A16L-AGA-5D-2
Omron
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): SQUARE TYPE; Contact Function: OFF-(ON); Switch Action: ALTERNATE;
0 deg
GREEN
.366 inch
3.302
SQUARE TYPE
HIGH RELIABILITY
15.8 inch
21.1 mm
18 mm
.425 inch
M16X1
5A@125VAC
5 A
3 A
3A@30VDC
OFF-(ON)
SNAP ACTION
125 V
30 V
1000VAC
100000 Cycle(s)
GREEN LED
100000000 ohm
A16
PANEL MOUNT
4.41 N
55 Cel
-10 Cel
0
IP40
ALTERNATE
DPDT
PUSHBUTTON SWITCH
.291 inch
SOLDER
A16L-ARM-5D-2
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): SQUARE TYPE; Contact Function: OFF-(ON); DC Maximum Rating R Load (Contact): 3A@30VDC;
RED
RED LED
MOMENTARY
A9PS16-0012
PUSHBUTTON SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): PUSHBUTTON; Contact Function: OFF-(ON); Contact Resistance: 80 mohm;
.13 inch
PUSHBUTTON
5.6 inch
5 mm
7 mm
.062 inch
.1A@28VAC
.1 A
.1A@28VDC
80 mohm
28 V
500VAC
50000 Cycle(s)
500000000 ohm
THROUGH HOLE-RIGHT ANGLE
4.9 N
85 Cel
-20 Cel
TRAY
IP64
SPDT
.102 inch
A9PS16-0013
PUSHBUTTON SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): PUSHBUTTON; Contact Function: OFF-(ON); AC Maximum Rating R Load (Contact): .1A@28VAC;
5.5 inch
5.6 mm
A9PS26-0012
Omron A9PS26-0012 is a DPDT pushbutton switch with 50000 cycles electrical life. It has IP64 sealing, 5.6" body width, and operates b/w -20 to 85°C. Ideal for applications requiring momentary switch action with 4.9N max operating force and solder termination type.
A9PS26-0013
PUSHBUTTON SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: DPDT; Type (Actuator): PUSHBUTTON; Contact Function: OFF-(ON); Minimum Operating Temperature: -20 Cel;
AV031003C940N
Apem Components
AV031003C940N by Apem Components is a SPST pushbutton switch with 100000 cycle electrical life and 1000000000 ohm insulation resistance. It features a flat type actuator, OFF-(ON) contact function, and operates at temperatures ranging from -30 to 70 °C. Ideal for panel mounting applications requiring momentary switch action with a max DC contact voltage of 48V.
.079 inch
STAINLESS STEEL
FLAT TYPE
NO SEAL
19 mm
25 mm
.748 inch
.63 inch
BRASS
SILVER
2 A
2A@48VDC
10 mohm
BREAK-BEFORE-MAKE
48 V
4000VAC
1000000000 ohm
POLYBUTYLENE TEREPHTHALATE
PANEL MOUNT-THREADED
70 Cel
-30 Cel
BULK
SPST
.197 inch
SCREW
AV031003C940T
AV031003C940T by Apem Components is a pushbutton switch with a brass terminal material and an electrical life of 100,000 cycles. It has a sealing rating of IP65 and is commonly used for panel mount applications.
INTERNAL & FRONT PANEL SEAL
IP65
A16L-AYM-5D-2
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): PUSHBUTTON; Contact Function: OFF-(ON); Maximum DC Contact Voltage: 30 V;
YELLOW
18.0086 inch
21.1074 mm
10.3124 mm
3A@250VAC
250 V
LED
MOLDED
SOLDER LUG
AV091003C900K
AV091003C900K by Apem Components is a SPST pushbutton switch with 100000 cycles electrical life. Featuring brass terminals, silver end contacts, and polybutylene terephthalate insulator, it operates b/w -20 to 55 °C. Ideal for panel mounting applications requiring a momentary OFF-(ON) contact function at 48VDC/2A load.
NICKEL
24.003 mm
18.9992 mm
.531 inch
e4
AV091003C900
AV091003C900 by Apem Components is a SPST pushbutton switch with 100000 cycles electrical life. Featuring brass terminals, silver end contact plating, and polybutylene terephthalate insulator material, it operates b/w -20 to 55 °C. Ideal for panel mounting applications with a max DC contact voltage of 48V and current rating of 2A@48VDC.
AV
IPR3SAD2L0S
The Apem Components IPR3SAD2L0S is a black LED pushbutton switch with 1000000 cycles electrical life. Featuring SPST switch function, it has a max operating temperature of 125°C and insulation resistance of 1000000000 ohm. Ideal for applications requiring momentary contact functions in various electronic devices.
BLACK
.276 inch
POLYAMIDE
1.4986
ROUND CURVED TYPE
6.4 mm
12 mm
.472 inch
.267 inch
GOLD
0.2A@250VAC
.2 A
0.2A@50VDC
100 mohm
50 V
1500VAC
1000000 Cycle(s)
THERMOPLASTIC
125 Cel
-40 Cel
EPOXY
.342 inch
TPC11CGPC0
TE Connectivity
TPC11CGPC0 by TE Connectivity is a black pushbutton switch with a polyester housing. It has an electrical life of 100,000 cycles and a max DC contact current of 0.4A. This switch is commonly used in panel mount applications requiring momentary switch action.
.137 inch
.762
ROUND TYPE
PANEL MOUNTABLE
5.33 inch
8.64 mm
8.13 mm
.19 inch
.22 inch
10-48
GOLD OVER NICKEL
.02A@20VAC
.4 A
0.4VA@28VDC
.02A@20VDC
20 mohm
20 V
COPPER ALLOY
POLYESTER
HIGH TEMP POLYESTER
1
2.548 N
65 Cel
3
EPOXY TERMINAL SEALED
HAND
WIRE
30-05-01-502-01
Grayhill
Grayhill 30-05-01-502-01 is a SPST pushbutton switch with SILVER terminals, rated for 1A@115VAC. With EPOXY sealing and PHENOLIC insulator, it has an electrical life of 1000000 cycles. Ideal for applications requiring momentary OFF-(ON) contact function in temperatures ranging from -40 to 85 °C.
.255 inch
POLYPHENYLENE SULPHIDE
PLUNGER
BUTT TYPE SWITCHES
14.99 inch
18.03 mm
15.31 mm
.5 inch
.355 inch
1/2-32
1A@115VAC
1 A
25 mohm
115 V
PHENOLIC
3.89 N
30-16BLK
The Grayhill 30-16BLK is a SPST pushbutton switch with black actuator and brass terminals. With an electrical life of 100,000 cycles, it offers high insulation resistance of 1Gohm. Ideal for applications requiring a latched switch function, operating temperatures range from -40 to 85°C.
3.683
POSITIVE FEEL
8 mm
.469 inch
.421 inch
15/32-32
CADMIUM
20.02 N
LATCHED
.222 inch
30-251BLK
The Grayhill 30-251BLK is a black pushbutton switch with SPST function. It has an electrical life of 250k cycles, insulation resistance of 1G ohm, and max operating force of 10.56N. Ideal for applications requiring momentary switch action in temperatures ranging from -40 to 85°C.
.209 inch
1.5748
SEALED BUSHING AND BUTTON
10.41 mm
11.1 mm
.25 inch
1/4-32
250000 Cycle(s)
10.56 N
BUSHING AND BUTTON SEALED
30-251RED
30-251RED by Grayhill is a red pushbutton switch with a thermoplastic insulator and brass terminal material. It has an electrical life of 250,000 cycles and can withstand temperatures from -40 to 85°C. This switch is commonly used for panel mounting in various applications.
39-24
The Grayhill 39-24 is a black pushbutton switch with SPST function and gold-plated contacts. With an electrical life of 100,000 cycles, it has a max AC contact current of 0.5A and operates b/w -40 to 85°C. Ideal for applications requiring momentary switch action in panels with threaded mounting features.
.175 inch
WITH OVERTRAVEL
9.02 mm
6.35 mm
.164 inch
.125 inch
8-40
.5A@115VAC
.5 A
2.22 N
.1 inch
BRONZE
39-251BLK
The Grayhill 39-251BLK is a SPDT pushbutton switch with gold-plated brass terminals. With an electrical life of 500,000 cycles, it offers reliable performance in applications requiring momentary contact functions. The switch has a max operating temperature of 125°C and is ideal for use in electronic devices that require a durable and high-quality pushbutton switch.
.2 inch
NYLON
2.54
SMALL BUTTON TYPE
FLUOROSILICONE O-RING,BLK BUT.
8.64 inch
8.33 mm
12.7 mm
.06 inch
UNTHREADED
PHOSPHOR BRONZE
0.125A@220VAC
.25A@115VAC
.25 A
.15 A
.15A@28VDC
500000 Cycle(s)
3.61 N
4
39-251RED
39-251RED by Grayhill is a SPDT pushbutton switch with RED actuator color. It has an electrical life of 500K cycles, insulation resistance of 1G ohm, and operates b/w -40 to 125°C. Ideal for applications requiring momentary contact function in electronic devices or industrial equipment.
39-351RED
39-351RED by Grayhill is a SPST pushbutton switch with red actuator and gold-plated contacts. With an electrical life of 250K cycles, it has a sealing for bushing and button, making it suitable for applications requiring momentary switch action in temperatures ranging from -40 to 85°C.
.889
SEALED
7.92 mm
6.67 N
39-501BLK
The Grayhill 39-501BLK is a black pushbutton switch with brass housing and terminals. It has an electrical life of 1M cycles, insulation resistance of 1G ohm, and operates b/w -40 to 85°C. Ideal for applications requiring momentary contact functions in electronic devices or industrial equipment.
BRASS STANDOFFS
5.46 mm
0.15A@125VAC
MAKE-BEFORE-BREAK
WAVE
.14 inch
TP33P008000
TP33P008000 by Apem Components is a SPST pushbutton switch with 60000 cycles electrical life. Featuring brass terminals, gold plating, and polybutylene terephthalate insulator material, it operates b/w -30 to 85 °C. Ideal for applications requiring momentary switch action in environments where solvent washability is needed.
.139 inch
GLASS FILLED POLYAMIDE
.7874
STANDARD PLUNGER
5 inch
8.1 mm
.196 inch
.24 inch
0.4VA@20VAC
.02 A
50 mohm
60000 Cycle(s)
THROUGH HOLE-STRAIGHT
Gold (Au)
.129 inch
SOLVENT
TP33WW08000
TP33WW08000 by Apem Components is a SPST pushbutton switch with 60000 cycles electrical life. Featuring gold-plated brass terminals, it has a max operating temperature of 85°C and can handle up to 0.02A at 20VAC/DC. Ideal for applications requiring momentary switch action in electronic devices with through-hole mounting requirements.
ROHS COMPLIANT
8.65 mm
8.58 mm
.225 inch
TP
P27A-BL
Carling Technologies
Carling Technologies P27A-BL is a SPST pushbutton switch with 25,000 cycles electrical life and 100M ohm insulation resistance. With a max AC contact current of 6A@125VAC, it is ideal for panel mount applications requiring OFF-(ON) contact function. The switch features a PHENOLIC insulator material and operates within a temperature range of 0-85°C.
BLACK CONCAVE BUTTON
13.3 inch
13.76 mm
30.04 mm
.468 inch
.562 inch
6A@125VAC
6 A
SLOW-MAKE/-BREAK
25000 Cycle(s)
7.23 N
0 Cel
LATCHED AND MOMENTARY
90030
Littelfuse
Littelfuse 90030 is a SPST pushbutton switch with SILVER terminals. It has a max DC contact voltage of 12V and current rating of 35A@12VDC. Ideal for panel mount applications, offering OFF-(ON) momentary switch function.
.38 inch
1.35 mm
1.12 mm
5/8-32
35 A
35A@12VDC
12 V
MSPS103C0
TE Connectivity's MSPS103C0 is a black pushbutton switch with SPST function. It has an electrical life of 10k cycles, insulation resistance of 1G ohm, and can handle up to 0.5A AC current. Ideal for applications requiring momentary switch action in temperatures ranging from -20°C to 80°C.
2.4892
ROUND/EXTENDED TYPE
26.67 mm
10.16 mm
.245 inch
1/4-40
0.5A@125VAC
10000 Cycle(s)
80 Cel
ISF15ACP4
Nkk Switches
ISF15ACP4 by Nkk Switches is a SPST pushbutton switch with LED illumination. It has an electrical life of 1000000 cycles and insulation resistance of 100M ohm, suitable for applications requiring momentary switch action at temperatures ranging from -20 to 70°C.
1.778
0.1A@12VDC
200 mohm
125VAC
14
IS15ESBFP4RGB
IS15ESBFP4RGB by Nkk Switches is a Pushbutton Switch with LED illumination, SPDT switch function, and 3M electrical life cycles. Ideal for applications requiring momentary switch action, such as control panels or industrial machinery. Operating temperature range from -15 to 50°C ensures reliable performance in various environments.
4.4958
3000000 Cycle(s)
50 Cel
-15 Cel
PV5S24019
E-switch
PV5S24019 by E-switch is a red pushbutton switch with SPST function. It has an electrical life of 200,000 cycles and insulation resistance of 1,000,000,000 ohms. Ideal for applications requiring momentary switch action and panel mounting in temperatures ranging from -20 to 70°C.
.283 inch
M12P1
2000VRMS
200000 Cycle(s)
.149 inch
PV1F240SS
PV1F240SS by E-switch is a SPST pushbutton switch with 200000 cycles electrical life. It has 1000000000 ohm insulation resistance and operates b/w -20 to 55 °C. Ideal for applications requiring momentary OFF-(ON) contact function, such as panel mounting with solder lug termination.
M19P1
COPPER
2000VAC
.287 inch
PV5S24011G
PV5S24011G by E-switch is a black pushbutton switch with a brass terminal material. It has an electrical life of 200,000 cycles and insulation resistance of 1,000,000,000 ohms. This switch is commonly used in panel mount applications requiring a SPST contact function.
SV4F23SS301
SV4F23SS301 by E-switch is a SPST pushbutton switch with 200000 cycles electrical life, IK10/IP67 sealing, and white LED illumination. Ideal for applications requiring momentary switch action, it has a max operating force of 4.5N and can handle up to 2A@36VDC load.
.08 inch
1.8
BUTTON TYPE
16.81 mm
22 mm
M19X1.0
2A@36VDC
36 V
WHITE LED
4.5 N
IK10; IP67
.094 inch
© 2023 All rights reserved
