Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF/Microwave antennas are devices designed to radiate or receive electromagnetic waves in the radio frequency (RF) and microwave frequency range. They are used in a wide range of applications, including wireless communications, radar systems, satellite communications, and broadcast systems.RF/Microwave antennas are typically made up of conductive elements such as wires, rods, or plates, which are placed in a specific arrangement to produce the desired radiation pattern. The design of the antenna is critical for achieving good performance in terms of gain, directivity, and efficiency.There are many types of RF/Microwave antennas, each with its own unique characteristics and advantages. Some common types include dipole antennas, patch antennas, helical antennas, and horn antennas. Each type of antenna is suited for specific applications and can be optimized for different frequency ranges.RF/Microwave antennas are critical components in modern wireless communication systems, and their performance is a key factor in the overall performance of the system. With advances in technology, the design and performance of RF/Microwave antennas continue to improve, allowing for better signal quality and higher data rates in wireless communication systems.
Add filters
All
Selected
1004627
KYOCERA AVX
GPS ANTENNA;
GPS ANTENNA
ANT-916-CW-QW-SMA
Linx Technologies
The Linx Technologies ANT-916-CW-QW-SMA is an RF antenna with 2 VSWR, 10 W power, and linear polarization. Ideal for Bluetooth, GSM, LTE applications with a frequency range of 865-965 MHz. Features omni-directional coverage and panel mount design for mobile station use.
RP-SMA-F
BLUETOOTH/CELLULAR/GSM/ISM/IOT/LTE/SIGFOX/UMTS/ZIGBEE
50 ohm
COAXIAL
PANEL MOUNT
YES
965 MHz
865 MHz
90 Cel
-40 Cel
LINEAR
MOBILE STATION ANTENNA
10 W
2
ANT-868-CW-QW-SMA
The Linx ANT-868-CW-QW-SMA is a 50 ohm, 10 W RF antenna with omni-directional polarization. It operates b/w 750-950 MHz for Bluetooth, GSM, LTE, Zigbee applications. With a VSWR of 2 and linear polarization, it can withstand temperatures from -40 to 90°C and is suitable for mobile station use.
950 MHz
750 MHz
W1P35X8W04-U100D3B0A
BASE STATION/BROADCAST TRANSMISSION ANTENNA;
BASE STATION/BROADCAST TRANSMISSION ANTENNA
AEACMK0660746-SG4
Abracon
Abracon's AEACMK0660746-SG4 GPS antenna offers 5dB gain, RHCP polarization, and 50 ohm impedance. Ideal for BEIDOU/GALILEO/GLONASS/GNSS/IOT applications with a frequency range of 1561-1602 MHz. Operating temperatures from -40 to 85°C make it suitable for various environments.
TNC-F
BEIDOU/GALILEO/GLONASS/GNSS/GPS/IOT
5 dB
NO
1602 MHz
1561 MHz
85 Cel
RHCP
1.5
FR05-S1-R-0-105
Fractus Antennas S L
FR05-S1-R-0-105 by Fractus Antennas S L is a plastic RF antenna with VSWR of 2, omni-directional, and linear polarization. It's ideal for ISM/RFID/Wireless/Zigbee applications at -40 to 85°C, operating b/w 868-870 MHz as a mobile station antenna with 50 ohm impedance.
IT CAN ALSO OPERATE AT 902 TO 928 MHZ
ISM/RFID/WIRELESS/ZIGBEE
COMPONENT
SURFACE MOUNT
4
870 MHz
868 MHz
PLASTIC/EPOXY
APAES868R8060C16-T
Abracon's APAES868R8060C16-T is a COAXIAL RFID antenna with RHCP polarization. It operates b/w 854-882 MHz, ideal for BASE STATION/BROADCAST TRANSMISSION applications. Featuring 50 ohm impedance and PANEL MOUNT design, it ensures reliable RF performance.
SMA
RFID
882 MHz
854 MHz
APAEA1575R0940K14-T
Abracon's APAEA1575R0940K14-T is a GPS antenna with 1.5 VSWR, RHCP polarization, and 50 ohm impedance. Ideal for GPS/WLAN applications, it features through-hole mounting and is categorized under RF/Microwave Antennas.
GPS/WLAN
THROUGH HOLE MOUNT
1
AECW0801C09S-3000S
Abracon AECW0801C09S-3000S is a coaxial RF antenna with 50 ohm impedance, operating from 698 MHz to 960 MHz. It has a VSWR of 3 and linear polarization, suitable for applications in 4G, GPS, LTE, and wireless technologies. With a temperature range of -40°C to 85°C and panel mount feature, it's ideal for IoT and GNSS systems.
SMA-M, IT CAN ALSO OPERATE AT 1710 TO 2690 MHZ; WiFi - 2400-2483.5 MHZ, 4900-5825 MHZ, VSWR-2.5, Pol-Linear; GNSS-1561-1602 MHZ, VSWR-1.5, Pol-RHCP
4G/BEIDOU/IOT/GLONASS/GNSS/GPS/LTE/QZSS/WIRELESS
960 MHz
698 MHz
ANTENNA-OTHER
3
APAES923R3640C16-T
Abracon's APAES923R3640C16-T is a 50 ohm RFID antenna with RHCP polarization. It operates b/w 918-927 MHz, with a VSWR of 1.5. Ideal for base station/broadcast transmission applications, it features through hole mounting for easy installation.
927 MHz
918 MHz
APAMS-102
Abracon's APAMS-102 is a 50 ohm, 1 dB gain RF antenna with omni-directional linear polarization. It operates b/w 820-960 MHz bandwidth for CDMA/GPRS/GSM/UMTS/WIRELESS applications. With a VSWR of 2, it can withstand temperatures from -40 to 80°C and features panel mounting in coaxial construction.
HIGH RELIABILITY, SMA, IT CAN ALSO OPERATE AT 1710 TO 2170 MHZ
CDMA/GPRS/GSM/UMTS/WIRELESS
170 MHz
1 dB
820 MHz
80 Cel
APAMP-109
Abracon's APAMP-109 is a GPS antenna with 5dB gain and 50 ohm impedance. Constructed coaxially in plastic/epoxy, it has VSWR of 1.5, RHCP polarization, and operates b/w -40°C to 80°C. Ideal for RF/Microwave applications like GPS systems due to its high performance and durability.
HIGH RELIABILITY, SMA
GPS
ART868X25275YZ25
Abracon's ART868X25275YZ25 is a linear polarization antenna with 1dB gain. It operates b/w 865-868MHz, suitable for RFID applications. With a temperature range of -40 to 85°C, it is designed for surface mount installation in RF/Microwave systems.
ART868X130903TX13
ART868X130903TX13 by Abracon is a RF/Microwave Antenna with 1dB Gain, RHCP/Linear Polarization, and operating frequencies of 865-868MHz. It is designed for RFID applications, featuring a temperature range of -40 to 85°C. This surface mount antenna is ideal for base station/broadcast transmission setups.
RHCP/LINEAR
ART868X2117225TX21
Abracon's ART868X2117225TX21 is a linear polarization RFID antenna with 1 dB gain. It operates b/w -40°C to 85°C, covering frequencies from 865 MHz to 868 MHz. Ideal for base station/broadcast transmission applications, it features surface mounting for easy installation.
ART923X855406TX02
ART923X855406TX02 by Abracon is a linear polarization RFID antenna with 3dB gain. It operates b/w 902-928MHz, suitable for base station/broadcast transmission applications. With a temperature range of -40 to 85°C and surface mount feature, it offers reliable performance in various environments.
3 dB
928 MHz
902 MHz
AECW0401G4ZS-3000S
Abracon's AECW0401G4ZS-3000S is a GPS antenna with 50 ohm impedance, RHCP polarization, and 1.5 VSWR. Ideal for BEIDOU/GLONASS/GNSS/GPS/IoT/QZSS applications, it operates b/w -40°C to 85°C temperatures and features panel mount construction.
IATF 16949,SMA-M
BEIDOU/GLONASS/GNSS/GPS/IoT/QZSS
AECS1806D07ZS-3000S
Abracon's AECS1806D07ZS-3000S RF antenna has a VSWR of 3, linear polarization, and operates b/w 698-960MHz. Ideal for BEIDOU/GLONASS/GNSS/GPS/IOT/LTE/QZSS applications with a temperature range of -40 to 85°C. Features panel mount construction and 50 ohm impedance for reliable performance.
SMA-M; FME-M, IT CAN ALSO OPERATE AT 1710 TO 2690 MHZ; GNS-1561-1602 MHZ, VSWR-1.5, Pol-RHCP; AM/FM-0.529-1.629 MHZ, 76-108 MHZ, VSWR-2.5, Pol-Linear
BEIDOU/GLONASS/GNSS/GPS/IOT/LTE/QZSS
IATF 16949
AECC0502GBS-S
AECC0502GBS-S by Abracon is a COAXIAL HELIX ANTENNA with 50 ohm impedance. It operates in temperatures from -40°C to 85°C, suitable for BEIDOU/GALIELO/GLONASS/GNSS/GPS/IoT applications. With a VSWR of 2 and RHCP polarization, it offers reliable performance for RF/Microwave communication needs.
SMA-M
BEIDOU/GALIELO/GLONASS/GNSS/GPS/IoT
HELIX ANTENNA
AECW0801C03S-3000S
Abracon AECW0801C03S-3000S is a COAXIAL RF antenna with 50 ohm impedance. It operates b/w 698-960 MHz frequencies, suitable for 4G, GPS, and IoT applications. With VSWR of 3, it has linear polarization and can withstand temperatures from -40 to 85°C.
SMA-M, IT CAN ALSO OPERATE AT 1710 TO 2690 MHZ; WiFi-2400-2483.5 MHZ, 4900-5825 MHZ, VSWR-2.5, Pol-Linear; GNS-1561-1602 MHZ, VSWR-1.5, Pol-RHCP
4G/BEIDOU/CELLULAR/GLONASS/GNSS/GPS/IOT/LTE/QZSS/WIRELESS
AECR1808A12S-3000S
Abracon AECR1808A12S-3000S is a COAXIAL RF antenna with 50 ohm impedance, 600-6000 MHz frequency range, and 10W power. Ideal for 4G/LTE/GPS/IoT applications, it has VSWR of 4 and linear polarization. Operating temp: -40 to +85°C, suitable for PANEL MOUNT installations.
SMA-M, WiFi-2400-2483.5 MHZ, 4900-5925 MHZ, Imp-50, VSWR-2.5, Pol-Linear; GNS-1561.098-1606 MHZ, Imp-50, VSWR-2, Pol-RHCP
6000 MHz
600 MHz
APAMPS-106
Abracon's APAMPS-106 is a COAXIAL RF antenna with 1.5 VSWR, 5 dB gain, and RHCP polarization. Ideal for GPS/GSM applications, it operates b/w -40°C to 80°C temperatures and has a characteristic impedance of 50 ohm. The antenna features panel mounting for easy installation.
HIGH RELIABILITY, SMA, GPS-1575.42 MHZ ; GSM-806-960 MHZ, 1710-1880 MHZ, Imp-50, VSWR-2, Pol-Linear
GPS/GSM
BB-2JW0124Z-C868B
Advantech
MOBILE STATION ANTENNA;
BMLPVMB/LTE-VP
Pctel
Pctel's BMLPVMB/LTE-VP is a COAXIAL RF antenna with 50 ohm impedance. It operates b/w 600-960 MHz for 4G/LTE applications. Featuring a VSWR of 2, it is designed as a MOBILE STATION ANTENNA for LINEAR VERTICAL polarization and PANEL MOUNT installation.
N-F; IT CAN ALSO OPERATE AT 1710 TO 2700 MHZ
4G/LTE
LINEAR VERTICAL
G8UT
TE Connectivity
OC24519-FNM
BASE STATION/BROADCAST TRANSMISSION ANTENNA; Gain: 9 dB;
9 dB
MR77
Diamond Antennas
The Diamond Antennas MR77 is a 50 ohm coaxial mobile station antenna with max. VSWR of 1.5 and 70W transmission power. Operating freq. range from 144-148 MHz, ideal for magnet mount installations in RF/Microwave applications.
MAGNET MOUNT
148 MHz
144 MHz
70 W
2133530100
Molex
Molex 2133530100 is an Omni-Directional RF antenna module for BEIDOU, cellular, GPS, GLONASS, LTE, and UWB applications. Linear polarization with operating frequency range of 698-960 MHz. Features adhesive mount for easy installation.
IT CAN ALSO OPERATE AT 1400-1500 MHZ, 1500-1700 MHZ, 1700-2700 MHZ, 3300-4200 MHZ, 4400-5000 MHZ AND 5900-8500 MHZ
BEIDOU/CELLULAR/GPS/GLONASS/LTE/UWB
MODULE
ADHESIVE MOUNT
2158720001
2158720001 by Molex is a COAXIAL RF antenna with 50 ohm impedance, operating b/w 2400-2500 MHz. It is ideal for BASE STATION/BROADCAST TRANSMISSION applications due to its linear polarization and panel mount feature. With a temperature range of -40 to 85°C, it ensures reliable performance in various environments.
SMA-F, IT CAN ALSO OPERATE AT 5000 to 6000 MHZ and 6000 TO 7125 MHZ
2500 MHz
2400 MHz
© 2023 All rights reserved
